• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.199-202
• /
• 2011

플로팅구조물은 열악한 해양환경상태에 있기 때문에 구조물응답에 대한 실시간 모니터링 기술을 적용하여 구조안전성을 확보해야 한다. 특히 기존의 전기 저항식 스트레인 게이지 단점을 극복한 광섬유 센서를 이용하여 실시간 모니터링 시스템 개발에 관한 연구가 필요하다. 본 논문에서는 플로팅구조물의 축소 모델에 광섬유 센서 중 하나인 FBG센서를 부착하고 실험용 수조에 설치하여 광학 스펙트럼 분석기를 통해 중심파장을 측정한 후 변형률을 계산하였다. 또한 유한요소 모델을 유한요소 해석 프로그램인 ABAQUS를 사용하여 모델링하고 유한요소 해석을 통해 변형률을 출력하고 실험결과와 해석 결과를 비교하여 광섬유 센서를 이용한 플로팅구조물의 실시간 모니터링을 위한 기초자료를 제공하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.297.1-297.1
• /
• 2013

PV모듈은 다수의 태양전지를 상호 연결한 후 라미네이션(Lamination)공정을 통해 오랜 시간 견딜 수 있는 하나의 구조물로 만든 것이다. 외부환경 노출되어 장시간 발전하는 PV모듈은 설하중 풍하중 등 다양한 응력을 받는다. 이러한 외부 응력은 PV모듈 내부의 태양전지를 파손시켜 발전 출력의 감소를 발생 시킬 수 있다. 따라서 기계적 신뢰성을 보장하는 것은 매우 중요하며, PV모듈의 기계적 강도를 향상시키기 위한 연구가 활발히 진행되어지고 있다. 따라서, 본 논문에서는 PV모듈의 기계적, 물리적 변형을 최소화 하고자 PV모듈 전면에 사용되는 강화유리의 두께를 증가시켜 기계하중 시험을 진행하였다. 실험은 K SC IEC 61215의 PV모듈 인증시험 기준에서 제시하는 기계강도 시험과 동일한 방식으로 시험을 실시 하였으며, 전면유리 두께가 3.2 mm, 4 mm, 5 mm인 PV모듈을 사용하여 하중에 대한 최대변형과 출력 변화를 관찰하였으며, EL (electroluminescence) 측정을 통하여 기계강도 실험전 후의 모듈 내부 태양전지 파손 여부를 확인하였다. 이러한 결과는 PV모듈에 대한 내풍압 및 적설하중 등 Field에서 발생될 수 있는 물리적 내구성능을 분석하는데 많은 도움이 될 수 있다.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.52-54
• /
• 2002

저온균열은, 대한용접학회에서 발간한 '용접.접합용어사전'에 의하면, '용접 후 용접부의 온도가 대체로 $200^{\circ}C$ 이하의 저온에서 발생하는 균열을 총칭한다. 경우에 따라서는 실온까지 냉각한 후 일정한 기간이 경과한 후에 발생하기도 하며, 이러한 균열을 지연균열(delayed cracking)이라고 한다'로 되어 있다. 이들 저온균열의 발생에는 주로 구속응력과 경화조직 및 확산성수소가 영향을 미치고 있으며, 그 종류는 위에서 언급한 지연균열 외에 라멜라 테어링, 변형균열, 칭균열형 저온균열 등이 있다. 본 기술강좌에서는 용접부의 저온균열에 대하여 지연균열과 그 외의 저온균열로 나누어 2회에 걸쳐 소개하기로 한다.하기로 한다.

• 대한두경부종양학회:학술대회논문집
• /
• 1997.11a
• /
• pp.293.3-294
• /
• 1997

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.352.1-352
• /
• 2001

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.210-212
• /
• 2003

• Proceedings of the KSLP Conference
• /
• 2015.03a
• /
• pp.25-25
• /
• 2015

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.1-8
• /
• 2019

Globally, the elderly population is increasing rapidly, which means that the number of deformity correction operations for elderly spine deformity patient has increased. On the other hand, for aged patients with deformity correction operation, preoperative considerations to reduce the complications and predict a good clinical outcome are not completely understood. First, medical comorbidity needs to be evaluated preoperatively with the Cumulative Illness Rating Scale for Geriatrics or the Charlson Comorbidity Index scores. Medical comorbidities are associated with the postoperative complication rate. Managing these comorbidities preoperatively decreases the complications after a spine deformity correction operation. Second, bone densitometry need to be checked for osteoporosis. Many surgical techniques have been introduced to prevent the complications associated with posterior instrumentation for osteoporosis patients. The preoperative use of an osteogenesis inducing agent - teriparatide was also reported to reduce the complication rate. Third, total body sagittal alignment need to be considered. Many elderly spine deformity patients accompanied degenerative changes and deformities at their lower extremities. In addition, a compensation mechanism induces the deformed posture of the lower extremities. Recently, some authors introduced a parameter including total body sagittal alignment, which can predict the clinical outcome better than previous parameters limited to the spine or pelvis. As a result, total body sagittal alignment needs to be considered for elderly spine deformity patients after a deformity correction operation. In conclusion, for elderly spine deformity patients, medical comorbidities and osteoporosis need to be evaluated and managed preoperatively to reduce the complication rate. In addition, total body sagittal alignment needs to be considered, which is associated with better clinical outcomes than the previous parameters limited to the spine or pelvis.

• The Journal of Engineering Geology
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2000

Heaving of road and subsidence of slope took place at the Wiri region of the local highway 999 in Gyeongsangbukdo, Korea after heavy rain in the next year of construction. Although the state government had performed remedial treatments by reducing the angle and the height of the slope, deformation had never stopped. Therefore, we have preformed the analysis of deformation and stabilityof the slope. Study area consists of the Cretaceous shale, siltstone and sandstone and two faults are found. The major deformation occurred by sliding of rock mass along faults after heavy rain because not only thepore pressure at the fault plane and the unit weight of sliding mass increased, but did the shearstrength of saturated fault clay become very low. The decrease in shear strength of saturated fault clayis the major factor among the reasons for deformation. Numerical simulations using limit equilibriummodel, finite difference model and finite element model were performed for eight cross sections.Although safety factors are above 1.7 during the dry season, they become below 1.0 when groundwaterlevel raises to surface. The maximum displacement is about 15-3Ocm. However, safety factors increasedto above 2.4 and the maximum displacement is below 2.08cm after remedial treatment, Indicating thatthe slope becomes stable.

• Journal of Nutrition and Health
• /
• v.36 no.10
• /
• pp.1030-1035
• /
• 2003

This study was conducted to evaluate the safety of herbicide-resistant rice, a genetically modified organism (GMO) developed by the Rural Development Administration, in Sprague-Dawley rats. The nutrient content of herbicide-resistant polished and brown cooked rice was compared with that of conventional Ilpum polished and brown cooked rice to assess composition equivalence. Compositional analysis was performed to measure proximates, fiber, and minerals before animal feeding. Growing male rats were fed one of the following four diets for six weeks: Ilpum polished cooked rice (IP) and Ilpum brown cooked rice (IB) as a non-GMO and herbicide-resistant polished cooked rice (GP) and brown cooked rice (GB) as a GMO. We checked clinical symptoms (anorexia, salivation, diarrhea, polyuria, anuria, fecal change) every day, food intake, change of body weight twice a week, and serum biochemistry and organ weights after 6 weeks of experimental feeding among the four groups. Nutrient content of the herbicide-resistant rice was similar to that of the non-transgenic control and was within the published range observed for non-transgenic rice. We could not find any significant difference in the above-mentioned items as the index to be checked in the animals fed the GMO. These results suggest that the nutrient content of genetically modified herbicide-resistant rice is compositionally equivalent to that of conventional Ilpum rice and that growing male rats fed herbicide-resistant rice are no different from those fed Ilpum rice, non-GMO for 6 weeks.