• Composites Research
• /
• 제13권3호
• /
• pp.9-20
• /
• 2000

모든 층을 한 방향으로 적층하여 횡방향 굽힘과 축방향 인장운동이 연성되어 나타나는 복합재료 외팔보에 다중횡방향 개구형 크랙이 있는 경우에 대하여 자유진동 특성을 고찰하였다. 모든 크랙 위치에서의 파괴역학적 특성을 스프링 상수로 변환하여 산출하고 크랙사이 구간의 보를 전단변형 및 회전관성효과를 포함하여 해밀톤 원리로부터 운동방정식 및 경계조건을 유도하고, 라플라스 변환법을 사용하여 자유진동 특성에 관한 해를 구하였다. 복합재료의 설계 변수로서 섬유 체적비와 적층각을 설정하였으며, 크랙의 외형적 변수로서 크랙의 갯수, 분포 위치 및 크랙 깊이를 설정하여 이들 변수에 대한 고유진동수 및 모드형상의 변화 경향을 도출함으로써 임의의 다수 크랙이 분포되어 있는 보다 실제적인 상황에서의 진동변화에 근거를 둔 비파괴 검사가 이루어질 수 있는 방안에 대하여 연구하였다. 해석 결과 복합재료 보에 단일 크랙이 있는 경우에 비해 다중 크랙이 있는 경우가 여러 가지 변수에 대해 훨씬 복잡한 형태로 나타나고 있음을 보여준다.

• Journal of Welding and Joining
• /
• 제15권3호
• /
• pp.56-64
• /
• 1997

Macrostructural characteristic of the transverse cracks and fatigue behavior were studied for EH 32 TMCP 50mm thick plate welded with FACW under the variation in preheat and interpass temperatures. Transverse cracks were detected in specimen welded with preheat and interpass temperature below $30^{\circ}C$, but cracks were not detected in the specimens welded with preheat and interpass temperatures at the range of $100~120^{\circ}C$.C. The location of crack formation was found to strongly depend upon the thickness of weld layers as regard to the plate thickness.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 춘계학술발표 개요집
• /
• pp.70-73
• /
• 1997

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 추계학술발표 개요집
• /
• pp.92-94
• /
• 1996

• 대한기계학회논문집A
• /
• 제20권6호
• /
• pp.1903-1912
• /
• 1996

A quantitative study of impact damage of a soda-lime glass was carried out. An initiation and a propagation of cracks by the impact of two inds of steel ball was investigated. The fron, side and rear view of cracks were observed by a stereo-microscope. And the lowering of the benidng strength due to the impact of steel balls was examined through the 4-point bending test. A transparent glass is very helpful to understand and analyze the impact damage behavior of another brittle matereial. A deagdram about crack patterns according to the threshold impact velocity was sketched. A ring crack and a cone crack were formed at the low impact velocity. And as the impact velocity was higher, initial lateral crack was generated on the slanting surface of cone crack, and radial cracks were generated from the outermost ring crack. When the impact velocity of steel balls exceed a critical velocity, the contact site of specimens were crushed. According to the propagation of a cone crack, a rapid strength degradation occurred. In the specimen having crushed region, a bending strength was converged to a constant value instead of strength degradation.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2196-2204
• /
• 1996

The damage mechanism by the impact of steel ball on the soda-lime glass having a different surface roughness was investigated. An initiation and a propagation behavior of cracks formed by each impact velocity were quantitatively studied. A 4-point bending test was carried out to evaluate the remaining bending strength of a scratched soda-lime glass which impacted by the steel ball. As the surface roughness was increased, the shape of cracks became more irregular rather than those of the smooth specimens. The phenomenon of turning up in the wing of cone cracks occurred even at the lower velocity than the critical velocity caused the crushing. The threshold velocity of cracks initiation generally became lower than those of smooth specimen. An initiation and a propagation behavior of radial cracks had no relation with the direction of scratch on the surface. The remaning benidng strength of the scratched specimen according to impact velocity had no big difference compared with those of the smooth specimen.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.169-177
• /
• 2011

In this paper, the natural frequency of a cracked cantilever L-beams with a coupled bending and torsional vibrations is investigate by theory and experiment. In addition, a method for detection of crack in a cantilever L-beams is presented based on natural frequency measurements. The governing differential equations of a cracked L-beam are derived via Hamilton's principle. The two coupled governing differential equations are reduced to one sixth order ordinary differential equation in terms of the flexural displacement. Futher, the dynamic transfer matrix method is used for calculation of a exact natural frequencies of L-beams. The crack is assumed to be in the first mode of fracture and to be always opened during vibrations. In this study, the differences between the actual and predicted positions and sizes of crack are less than about 10 % and 39.5 % respectively.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.8-15
• /
• 2011

In this paper, the influence of a crack on the natural frequency of cracked cantilever L-shaped beam with coupled bending and torsional vibrations by analytically and experimentally is analyzed. The L-shaped beam with a crack is modeled by Hamilton's principle with consideration of bending and torsional energy. The two coupled governing differential equations are reduced to one sixth-order ordinary differential equation in terms of the flexural displacement. The crack is assumed to be in the first, second and third mode of fracture and to be always opened during the vibrations. The theoretical results are validated by a comparison with experimental measurements. The maximal difference between the theoretical results and experimental measurements of the natural frequency is less than 7.5% in the second vibration mode.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.5-14
• /
• 1999

Free vibration characteristics of a cantilevered laminated composite beam with multiple non-propagating transverse open cracks are investigated. In the present analysis a special ply-angle distribution referred to as asymmetric stiffness configuration inducing the elastic coupling between chord-wise bending and extension is considered. The multiple open cracks are modelled as equivalent rotational springs whose spring constants are calculated based on the fracture mechanics of composite material structures. Governing equations of a composite beam with open cracks are derived via Hamilton's Principle and Timoshenko beam theory encompassing transverse shear and rotary inertia effect is adopted. The effects of various parameters such as the ply angle, fiber volume fraction, crack numbers, crack positions and crack depthes on the free vibration characteristics of the beam with multiple cracks are highlighted. The numerical results show that the existence of the multiple cracks in an anisotropic composite beam affects the free vibration characteristics in a more complex fashion compared with the beam with a single crack.

• 소성∙가공
• /
• 제27권2호
• /
• pp.100-106
• /
• 2018

In the continuous casting process, the incidence of transverse surface cracks on the piece may occur by multiple and diverse variables. It is noted that mathematical models may predict only the occurance of the transverse surface cracks, but can require a lot of time (more than three days) to produce a result with this process. This study applied neural networks to predict whether the cracks on the piece surface occurs or does not occur. The computation time was shortened to three minutes, making it applicable to an on-line program, which predicts the non-cracks or cracks of the piece surface in the actual continuous casting process. In addition, the operating conditions to prevent the occurrence of the transverse surface cracks, using decision boundaries were also suggested.