• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.379-388
• /
• 2002

For the success of dental implant, accurate radiographic evaluation is prerequisite for planning the location of the osseointegrated implants and avoiding injury to vital structures. CT/MPR(computed tomography/multiplanar reformation) shows improved visualization of inferior alveolar canal. In order to obtain cross-sectional images parallel to the teeth, the occlusal plane is used to orientate for the axial plane. If the direction of axial plane is not parallel to the occlusal plane, the reformatted cross-sectional scans will be oblique to the planned fixture direction and will not show the actual dimension of the planned fixture's location. If the available bone height which measured in the cross-sectional view is much greater than the actual available bone height, penetration of canal may occur. The aim of this study is to assess the effect of the axial plane to measurement of available bone height for dental implant in computed tomography of the mandible. 40 patients who had made radiographic stents and had taken CT were selected. The sites that were included in the study were 45 molar regions. In the central panoramic scan, the length from alveolar crest to superior border of inferior alveolar canal(available bone height, ABH) was measured in direction of reformatted cross-sectional plane(uncorrected ABH). Then, length from alveolar crest to superior border of canal was measured in direction of stent(corrected ABH). The angle between uncorrected ABH and corrected ABH was measured. From each ABH, available fixture length was decided by $Br{{\aa}}nemark$ system. The results were following ; the difference between two ABHs was statistically significant in both first and second molar(p< 0.01). The percentage of difference more than 1 mm was 8.7% in first molar and 15.5% in second molar. The percentage of difference more than 2 mm was 2.0% in first molar and 6.6% in second molar. The maximum value of difference was 2.5 mm in first molar and 2.2 mm in second molar. The correlations between difference of 2 ABHs and angle was positive correlations in both first and second molar. The correlation coefficient was 0.534 in first molar and 0.728 in second molar. The second molar has a stronger positive correlation. The percentage of disagreement between 2 fixture lengths from two ABHs was 24.4% in first molar and 28.9% in second molar.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.68-87
• /
• 1982

In Korea, this is the situation at moment that the total demand of timber in 1972 is more than 5 million cubic meters. On the other hand, however, the available domestic supply of timber at the same year is only about, 1 million cubic meters. A great unbalancing between demand and supply of timber has been prevailing. To solve this hard problem, it has been necessitiated to build up the forest stocks as early as possible with fast grown species such as poplar. Under circumstances, poplar plantations which have been carryed on government and private have reached to large area of 116,603 hectors from 1962 up to date. It has now be come a principal timber resources in this country, and required the basic study on various properties of wood for it's proper utilization, since it has not been made of any systematic study on the properties of Populus grown in Korea. In order to investigate the properties such as anatomical, physical and mechanical properties of nine different species (P. euramericana Guiner I-214. P. euramericana Guiner I-476, P. deltoides Marsh, P. nigra var. italica (Muchk) Koeme, P. alba L.,P. alba $\times$ glandulosa P. maximowiczii Henry, P. koreana Rehder, P. davidiana Dode) of poplar for their proper use and development of new ways of grading processing and quality improving, this study has been made by the Forest Research Institute.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.20-32
• /
• 2011

Failure aspects of cut-slope, which induce the sequential collapses during the excavation stage, have been analyzed. Slope rock structures are investigated by examining the orientations and positions of discontinuity planes calculated based on the BIPS image inside the boreholes. Drilled core log has been also used to identify the structural defects. Clay minerals of swelling potentials are detected through XRD analysis. Numerical analysis for slope stability has been performed by utilizing the joint shear strength acquired from the direct joint shear test. Cut-slope collapse characteristics have been studied by investigating the posture of failure-prawn joint planes and the stability of tetrahedral blocks of different sizes. Cross-section analysis has been also performed to analyze the cut-slope behavior and to estimate the amount of reinforcement required to secure the stability of cut-slope. Behavior of reinforced cut-slope is also investigated by analyzing the slope monitoring data.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.213-221
• /
• 2011

The purpose of this study is to clarify the characteristics of forms and distributions of Gapyoungchon potholes. Different sizes of 153 potholes were distributed in the upper stream marginal area that was 30×25m, and over 70 percent among them were egg-shaped potholes. A development of joint in pothole was not important to make potholes in the stream but the mean size of potholes with joint was larger than without joint. Moreover, the schistosity structure of the bedrock was more important factor to develop potholes in this area. Finally, four cross sectional faces were found in this study area. From the reason, Gapyoungchon potholes are distributed on the rock terraces.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.115-124
• /
• 1993

A structural system reliability analysis is studied for the safety assessment of midship section. Probabilistically dominant collapse modes are generated by Element Replacement Method and Incrimental Load Method. In order to avoid generating the same modes repeatedly, it is branched at final plastic hinge. Using first and second order bound methods, system failure probability of midship section is computed and compared with deterministic load factor method to show the usefulness of the proposed method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1683-1696
• /
• 1991

본 연구에서는 정4각단면덕트 입구영역에서 층류맥동유동(laminar pulsating flows)의 유동특성을 이론 및 실험적으로 규명하기 위하여, 이론적 방법으로 덕트 입 구영역에서의 층류맥동유동에 대한 운동량방정식을 유도한 후 비선형인 대류항을 선형 화 시켜서 라플라스변환으로 속도분포식의 해를 구하였고, 실험적인 방법으로는 시험 덕트 크기는 횡단면의 가로*세로가 40mm*40mm이고, 길이가 4000mm인 정4각단면덕트 입구영역에서 송풍기에 의한 공기흡입유동으로 층류진동유동을 발생하며 이들 두유동 을 합성시켜 발생한 층류맥동유동에 대하여 열선유속계의 열선신호로부터 얻어진 속도 파형을 고찰하여 덕트내의 맥동유동에 대한 임계레이놀즈수를 결정하고 속도분포를 측 정하였다. 그리고 이론적으로 얻어진 속도분포식과 열선유속계로 측정한 속도분포를 비교검토하여 정확성을 검증하고, 이들 해석결과로 부터 층류맥동유동의 입구길이(en- trance lenght)식을 결정하여 제안하였다.

• The Korean Journal of Financial Management
• /
• v.18 no.1
• /
• pp.67-82
• /
• 2001

본 연구는 시장에 정보가 별로 알려져 있지 않은 증권이 많이 알려져 있는 증권보다 높은 추정위험 때문에 더 높은 수익률을 제공한다는 이론적 모형들이 시사하는 바에 기초하여, 수익률이 각 증권에 대해 시장에 알려져 있는 정보량과 역의 관계에 있다는 가설을 세우고 이를 실증분석하였다. 본 연구는 또한 기업규모가 정보량과 정의 상관관계가 있다는 점에서 기업규모보다 정확한 정보량 변수가 포함되면 기업규모효과는 사라질 것이라는 가설도 검증하였다. 미국의 상장주식들을 대상으로 횡단면 실증분석을 실행한 결과, 정보량이 평균수익률의 횡단면을 설명하는 것으로 나타난다. 정보량은 기업규모 변수가 동시에 포함될 경우에는 설명력이 떨어지지만 1월에는 기업규모효과와는 별도로 기대수익률을 설명하는 것으로 나타난다. 한편 기업규모의 변화 또는 기관투자자 지분율의 변화시 수익률이 변하는지에 대한 F-검정을 실시한 경우에도, 정보량은 1월중에는 기업규모 효과와는 달리 통계적으로 유의한 수익률 차이를 보이고 있다. 이와 같은 실증결과들은 정보량 효과가 어느 정도 존재함을 의미한다. 이와 같은 결론은 기존의 CAPM 관련 실증연구들이 주장하는 ${\beta}$의 무용성에 대한 논쟁은 아직 끝나지 않았음을 시사한다. 즉, 각 증권에 대한 모든 정보가 시장에 완전히 알려지지 않은 현실하에서는 추정위험을 감안한 ${\beta}$를 이용하여야만 CAPM을 검증할 수 있는 것이다.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2000.10b
• /
• pp.89-93
• /
• 2000

광파장 및 조사시기에 따른 오이묘의 생육 반응을 검토하였다. 광원에 따른 오이 묘의 생육상태를 조사해본 결과 청색광, 적색광을 처리한 것이 생체중, 하배축 무게, 근중이 증가하면서 하배축의 신장이 억제되었고, 청색광과 적색광을 혼합하여 야간 12시간씩 조사하여 30일간 육묘해 본 결과 뿌리의 발육도 우수하고, 줄기와 잎의 생육 정도에서도 우량묘의 소질을 보였다. 청색광과 적색광을 혼합하여 야간 6시간과 12시간씩을 조사하여 30일간 육묘한 결과 하배축의 길이는 각각 60.0mm와 44.9mm였고, 하배축의 무게는 0.59g, 0.62g으로 나타나 12시간 조사구가 하배축의 신장억제효과가 큰 것으로 나타났다. 하배축의 엽록소 함량은 청색광과 적색광의 조사시간이 길어질수록 뚜렷이 증가하였고, 식물체도 진한 녹색을 나타냈다. 광처리구와 무처리구의 오이묘 하배축의 횡단면과 종단면을 검경하여 세포구조를 비교해 본 결과 광처리구의 횡단면 표피조직은 단층의 밀착된 세포로 되어 있으며, 바깥쪽 세포는 현저하게 두꺼웠다. 후각조직의 세포는 작고 부정형이며, 세포간극이 조밀하였으며, 세포구조도 치밀한 특성을 보였다. 종단면은 광처리구에서 세포가 짧고 세포간에 간극이 없는 반면 무처리구는 세포가 길고 뚜렷이 구분되지 않은 것이 관찰되어 대체로 광처리구는 무처리구에 비해 세포신장이 억제되는 대신 세포구조가 치밀하여 식물체의 도장이 억제된다는 것을 알 수 있었다.

• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.21-27
• /
• 2015

Flow field around the KRISO 3600TEU container ship is computed using a surface generated based on interpolations of station lines, which are given in a body plan of the ship, without using any CAD program. An interpolation method is suggested based on inscribed circles to generate curves between two neighboring station lines. The interpolated surface is saved in a STL format to use the snappyHexMesh utility of the openfoam. Computed resistance of the ship is compared with experimental and other computational results and the effects of the interpolation of neighboring station lines on the computed resistance are investigated. The suggested method is applied to calculate the flow field around a submarine with appendages. The surface triangulations for the hull and the appendages are generated without consideration of each other, then those surface triangulations are simply combined to provide a grid generator with the body boundary. The junctures of the hull and the appendages are identified automatically during the grid generation procedure. Tip vortex is captured, which travels downstream from the tip of the appendages.

• Korean Journal of Plant Resources
• /
• v.19 no.1
• /
• pp.8-14
• /
• 2006

Anatomical and ultra-structural investigations on the vegetative and reproductive characters include stem, leaf, ovary, sepal, corolla, stigma, and seed surface on 10 taxa of the Korean Gentiana (Gentianaceae) were carried out to clarify the section and species limitation, As the results, taxonomic boundaries of the section, subsection, and series were recognized by using characters such as stem, leaf, sepal, ovary, and corolla. Also the seed morphology and testa surfaces were well defined at the species level.