• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.335-344
• /
• 2009

Embedded systems and web browsers have started to provide two-dimensional vector graphics features, to finally support scalability of graphics outputs, while traditional graphics systems have focused on the raster and bitmap operations. Nowadays, SVG and Flash are actively used while OpenVG from Khronos group plays the role of a de facto low-level API standard to support them. In this paper, we represent the design and implementation process and the final results of an OpenVG implementation, AlexVG. From its design stage, our implementation aims at the cooperation with SVG-Tiny, another de facto standard for embedded systems. Currently, our overall system provides not only the OpenVG core features but also variety of OpenVG application programs and SVG-Tiny media file playing capabilities. For the conformance with the standard specifications, our system completely passed the whole OpenVG conformance test suites and the graphics output portions of the SVG-Tiny conformance test suites. From the performance point of view, we focused on the efficiency and effectiveness especially on the mobile phones and embedded devices with limited resources. As the result, it showed impressive benchmarks on the small-scale CPU's such as ARM's, even without neither any other libraries nor acceleration hardware.

• Journal of Navigation and Port Research
• /
• v.31 no.5 s.121
• /
• pp.421-426
• /
• 2007

Recently, the defect maintenance period of the new construction structure was extended from 5 years to 10 years. And according to change of realization on the quality of construction and maintenance, a development of semi-permanent method of construction is required for maintenance of blind parts of underwater structure, such as bridge, dam, harbor, etc. In this study, we proposed a floating type sector dry caisson, which is effective to the maintenance of submerged large structures. These large structures were being maintained incompletely, partly due to unskilled divers and difficult working condition. Considering the easiness of access to the maintenance area and the cost for set up the working structure, especially for the case of structure slabs close to the sea surface and harrow pile span structures, we developed and introduced a sector dry caisson instead of the full caisson structure. By doing this, it is easy to move out the caisson rapidly in emergence case. Therefore, we expect that the floating sector caisson will contribute to reduce working time and improve the quality of underwater work in future days.

• Reproductive and Developmental Biology
• /
• v.32 no.3
• /
• pp.193-198
• /
• 2008

The current study was designed to extend the technique of spermatogonial transplantation to economically important pig model We evaluated the efficiency of pig to pig transplantation. Donor testis cells were harvested from testes obtained at castration of 10- to 14-day-old boars and were labeled with fluorescent marker(PKH26) before transplantation. The presence of infused dye or labeled pig testicular cells was confirmed in the seminiferous tubules from recipient pig. The most effective procedure of intratubular germ cell transfer was to insert an fine needle ($21{\sim}25$ gauge) through the cauda epididymis and testis into the rete testis under ultrasound guidance. Infusion of $5{\sim}7ml$ of dye solution or cell suspension could fill the rete and up to 50% of seminiferous tubules of 14-week-old boars. Testis were examined for the presence and localization of labeled donor cells immediately after transplantation and labeled donor cells were found in numerous seminiferous tubules from recipient pig testes. These results indicate that germ cell transplantation is feasible in recipient pig testis. This study represents successful spermatogonial transplantation between individual animals in a livestock species.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.2
• /
• pp.141-152
• /
• 2004

Optics fabrication process for precision space optical parts includes bound abrasive grinding, loose abrasive lapping and polishing. The traditional bound abrasive grinding with bronze bond cupped diamond wheel leaves the machine marks of about $20{mu}m$ rms in height and the subsurface damage of about 1 ${mu}m$ rms in height to be removed by subsequent loose abrasive lapping. We explored an efficient quantitative control of precision CNC grinding. The machining parameters such as grain size, work-piece rotation speed and feed rate were altered while grinding the work-piece surfaces of 20-100 mm in diameter. The input grinding variables and the resulting surface quality data were used to build grinding prediction models using empirical and multi-variable regression analysis. The effectiveness of such grinding prediction models was then examined by running a series of precision CNC grinding operation with a set of controlled input variables and predicted output surface quality indicators. The experiment achieved the predictability down to ${pm}20$ nm in height and the surface roughness down to 36 nm in height. This study contributed to improvement of the process efficiency reaching directly the polishing and figuring process without the need for the loose abrasive lapping stage.

• Journal of radiological science and technology
• /
• v.28 no.4
• /
• pp.307-315
• /
• 2005

In the ubiquitous computing environments, ICT industries of current society are developed in enormous growth. Medicine or patients with mobile devices can access at any time, any place. The medical procedures at the patient bedside are out of the scope of current systems, which means that patient record and image data access during the medical visit or the execution, recording and confirmation of the medicine prescriptions, still do not enjoy computerized support. Today, the exchange of medical images and clinical information is well defined by DICOM and HL7 standards. The DICOM independent terminal equipment image access system was developed in which a DICOM Engine acts as the gateway between a PACS DB and user's terminal. Implementation system is compatible with most currently available Integration system models. This paper presents a software technology where the medical and nursing staff will be equipped with any device connected by wire and wireless to a central server that provides access to the electronic patient records and that will actively inform about tasks pending distribution. The prototype described in this article implements a medical images and structured reports server that makes the search and recovery of data stored in the DICOM standard possible.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.133-137
• /
• 2012

Among various clean energy technologies, the solar energy technology has been widely used in various fields such as photovoltaic power generation and solar water/space heating. These days, special attention is drawn on its conversion into acoustic energy along with waste heat as a means to promote clean energy utilization. This work was carried out to investigate the possibility of converting solar energy into acoustic waves, especially, its performance characteristics for a single resonance tube (20.2 mm in ID). Variations are made for the stack length and its position as well as power supply. For a resonance tube of 200mm, an average sound pressure of 114.5 dB was measured with a stack length of 25.6mm at 5cm from the closed end. When the power supply was increased to 35W, an average sound pressure of 117.29 dB was detected with a frequency of 500Hz. There was an increase in frequency, 630 Hz (115.7dB), with a shorter resonance tube of 150mm.

• Weed & Turfgrass Science
• /
• v.2 no.3
• /
• pp.221-229
• /
• 2013

This paper reviews current status of weed control practices in herbicide-resistant crops to examine weed management strategies in cope with cropping herbicide-resistant crops in the near future. Herbicide-resistant crops were rapidly adopted weed management technologies due to broad-spectrum weed control without crop injury. Transgenic glyphosate-resistant cultivars in soybean, corn, canola, and cotton were adopted to manage weeds at lower cost in a simplified weed management system. Dual stack crops with glyphosate and glufosinate resistance were developed to control glyphosate resistant weeds in corn, soybean and cotton. New multiple herbicide-resistant crops with resistance to glyphosate and glufosinate, acetolactate synthase (ALS) inhibitors, synthetic auxin herbicides, 4-hydroxyphenyl pyruvate dioxygenase (HPPD) inhibitors or acetyl Coenzyme A carboxylase (ACCase) inhibitors will expended the utility of existing herbicide technologies to manage the evolution of resistant weeds. However, herbicide resistant crops alone cannot solve weed problems and thus studies on diverse weed managements using an array of alternating herbicides of mode of action, mechanical, and cultural practices are needed for integrated weed management systems in the future.

• Journal of Hospice and Palliative Care
• /
• v.19 no.4
• /
• pp.292-295
• /
• 2016

Hospice and palliative care in Taiwan has been growing continuously. The 2015 Quality of Death index, as rated by the Economist Intelligence Unit, ranked Taiwan first among Asian countries and sixth in the world. In this review article, we highlight three particular areas that might have contributed to this success; the laws and regulations, spiritual care and research network. Finally, we discuss the future challenges and prospects for Taiwanese encounters. A systemic review was conducted with the keywords "hospice palliative care Taiwan" using PubMed. The passing of the "Natural Death Act" in 2000 set the example and established a landmark for patient autonomy in Asia; it guarantees the patient's right to request that medical staff do not resuscitate (DNR) them and to reject other futile medical treatments at the end of their life, thus reflecting the importance of palliative care from the policy perspective. In 2015, Taiwan passed another pioneering law entitled the "Patient Autonomy Act". This law states that a patient may decline medical treatment according to his/her own will. Taiwanese indigenous spiritual care was launched in 2000. It requires a Buddhist Chaplain to successfully complete a training program consisting of lectures, as well as bedside practicum before applying Buddhist practices to end-of-life care. The Japan-Korea-Taiwan research network was established for the purpose of enabling collaborative research for the East-Asian collaborative cross-cultural Study to Elucidate the Dying process (EASED) cohort. With consensus from the government and society to make it a priority, hospice and palliative medicine in Taiwan has been growing steadily.

• Environmental and Resource Economics Review
• /
• v.16 no.3
• /
• pp.575-605
• /
• 2007

Korea's tidelands policy IS examined and criticized in the paper. Korea's major tidelands in the west coast might disappear within a decade. The anachronistic development IS driven by the political interest group, forming coalition for reclamation and busily fulfilling its own profits under the facade of public good and regional development. But all regions of the world have been gradually scrapping the massive reclamation projects since the 1970's and active movements to reverse the reclamation and restore the nature are on the rise. In 1978, the U.S. Supreme Court decided to suspend the construction of the dam and to protect the snail darter despite that over 100 million dollars had been injected. This court ruling became famous and caused the American public to change their perception about the environment. In the Netherlands, following a prolonged discussion on pros and cons of reclamation, open type seawall was adopted to strike a balance among the available alternatives. Japan's Ministry of Environment was praised for forming the National Wetland Committee in order to designate 20 new Ramsar sites by 2008, with an objective to reach 33 designated Ramsar sites. Away from the large-scale reclamation projects, Korea has to move towards smaller-scale projects focusing on the knowledege intensive and circular economy society that are more in harmony with the environment.

• Journal of the Korean association of regional geographers
• /
• v.18 no.2
• /
• pp.232-251
• /
• 2012

This paper is to examine new programme of study for geography by a revised geography(including historical, geographical and social understanding) National Curriculum in England. The new primary and secondary National Curriculum was respectively issued in 2007 for implementation from September 2008 and 2010 for implementation from September 2011. The revised National Curriculum was changed more than that of 1995 and 2000 in terms of its formation and content. Especially, Primary National Curriculum was rebuilded to the six areas of learning, in the end KS1-2 geography was integrated in 'historical, geographical and social understanding'. As a result of that, the subject named as geography only remains for KS3. Nevertheless, the new National Curriculum is consisted of programme of study(PoS) and attainment target(AT). But new programme of study was changed more than that of former curriculum in terms of its formation and content. Programme of study for primary school is organized with curriculum aims, the importance of areas of learning, essential knowledge, key skills, cross-curricular studies, breadth of learning and curriculum progression. On the other hand, that of geography for KS3 is organized with curriculum aims, the importance of geography, key concepts, key processes, range and content, curriculum opportunities. This paper examined on categorical features of new programme of study for KS3 geography and its implications for effective geography curriculum design and planning.