• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.61-74
• /
• 1998

The Purpose of this study was to investigate the stress distribution and tooth displacement at the initial phase produced by 5 types of molar uprighting springs using finite element method. The three dimensional finite element model of lower dentition, bone and springs was composed of 5083 elements and 2071 nodes. The results were as follows: 1. In case of helical spring and root spring, intrusion of lower canine and first premolar were observed md distal tipping, translation and extrusion of lower second molar were observed. 2. In case of T-loop, modified T-loop and box loop, intrusion and distal translation of lower second premolar were observed, and the largest crown distal tipping and translation of lower second molar were observed in T-loop and the smallest were observed in box loop. 3. In case of T-loop with cinch-bact crown distal tipping and translation of lower second molar were decreased, but extrusion was also decreased. 4. With increase of activation in T-loop, mesial translation and won distal tipping of lower second molar were increased and edentulous space was closing, but distal translation of second premolar was also increased. 5. With increase of tip-back bend in T--loop, distal tipping and translation of lower second molar were increased, but extrusion was also increased more largely.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.407-410
• /
• 2011

본 연구에서는 탑승객의 안전과 국내 환경에 적합한 제동거리 확보를 위해 새로운 개념의 스프링을 사용한 제동장치를 설계하고자 한다. 새로운 제동장치에 사용되는 스프링은 변위에 따라 감쇠 성능 특성을변화시키는 Multi-Rate 변위 감응형 스프링을 최적화하여 적용하였다. 이를 위한 최적화 기법으로는 비선형 최적화 기법인 순차적 2차계획법(Sequential Quadratic Programming, SQP)을 사용하였으며 먼저 Ziprider의 운동을 제동거리와 제동시 발생하는 회전각의 관계로 표현 가능한 수치모델을 개발하였다. 또한 개발된 수치모델은 Matlab을 이용하여 코드화하고 그 결과를 RecurDyn과 비교 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.606-612
• /
• 1985

On the stability of the Beck's column with a tip mass, the influence of the characteristics of the springs at the fixed end of the column are studied. The equations of motion and boundary conditions of this system are established by using the Hamiton's principle. On the evaluation of the stability of the column, t he effect of the shear deformation and rotatory inertial is considered in calculation. For the maintenance of the stability of the column, it is proved that the constant of the translational spring at the fixed end must be very large while th magnitude of the constant of the rotational spring at the fixed end has no effect. When the constants of the springs at the fixed end are small, it is also proved that the influence of the moment of inertial of the tip mass on the stability of the column are decreased and for the translational spring the degree of the decrease is more and more. Therefore it is found that the characteristics of the springs at the fixed end are very effective elements for the stability of the column when the columns subjected to a compressive follower force are designed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.80-80
• /
• 2004

베어링리스 모터는 기존의 전동기와 자기베어링을 결합한 기술로 축 길이가 줄어들어 회전 속도를 높일 수 있으며 소형화가 가능하다는 장점이 있다(Fig. 1). 베어링리스 모터를 설계하기 위한 첫 번째 단계는 베어링리스 모터의 수학적 모델을 도출하는 것인데, 기존의 연구에서 부상용 전류와 부상력의 관계는 잘 정립되어 있다. 그러나, 회전자의 변위에 따른 부상력의 변화는 명확히 정의되어 있지 안다. 본 논문에서는 분산 자기 회로 이론을 이용하여 회전자의 움직임에 따른 부상력의 변화를 스프링계수의 형태로 모델링하였다.(중략)

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.528-531
• /
• 2009

본 연구에서는 두 스프링으로 지지된 강체가 회전하는 Timoshenko 축을 따라 이동할 때, 그 계의 동적응답 특성을 해석하였다. 운동방정식은 Hamilton의 원리에 따라 유도되었다. 유도된 운동방정식을 이용하여 주요 설계 파라미터 변화에 따른 응답특성을 해석하였다. 해석시 설계파라미터를 무차원 변수화 하여 속도비, 질량비, 회전수비 등 그 변화에 따른 응답특성을 비교 분석하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.888-891
• /
• 2005

Compared to the simple-beam springs, double-folded springs have advantages of the linearity even at the long stroke, so that they have been widely used for optical components such as optical switches and optical attenuators. Until now only the stiffness of the double-folded springs dn the perpendicular direction of the shuttle movement has been considered for the stable operation, however, the rotational stiffness of the splings has not been researched as much. Therefore, this paper suggests the double-folded springs of the maximum rotational stiffness with the constant stiffness in the stroke direction using the reliability based topology optimization (RBTO), whose operation properties were experimentally characterized.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.11a
• /
• pp.42-46
• /
• 1986

회전축계가 위험한 공진 또는 불안한 상태를 나타내지 않고 조용하고 안정된 운전상태를 유지하려는 목적은 축의 휨강성, 몸체형상, 베어링의 크기 및 형상과 같은 설계변수를 최적화하는 것으로 이루어질 수 없는 경우가 빈번하다. 이런 경우에는 베어링 외부에 작용하는 "외부댐핑"을 이용하여 진동문제를 근본적으로 개선할 수 있다. 이를 위하여 베어링 외부에 별도로 설계한 스프링과 댐퍼를 설치한다. 본 연구에서는 윤활이론에 따라 명확히 계산되고 그 신빙성이 실험적으로 검증된 "동압유막 댐퍼"의 감쇄계수를 이용하여 외부댐핑을 갖는 회전축-구름베어링\ulcorner와 회전축-저어널 베어링계의 진동특성을 해석하고 회전축-구름베어링계의 실험적 모델을 제시하고자한다. 또한 해석결과와 실험을 토대로 회전축계의 진동특성에 미치는 특성수 및 설계변수를 명확히 도출하여 동특성을 고려한 회전축계의 최적 설계에 기여하고자 한다.축계의 최적 설계에 기여하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.832-835
• /
• 2005

The free vibration of tapered piles embedded in soil is investigated. The pile model is based on the Bernoulli-Euler beam theory and the soil is idealized as a Winkler model for mathematical simplicity. The governing differential equations for the free vibrations of such members are solved numerically. The square tapered piles with one free and the other hinged end with rotational spring are applied in numerical examples. The lowest two natural frequencies are obtained over a range of non-dimensional system parameters: the rotational spring parameter, the embedded ratio, the foundation parameter, the width ratio of the contact area and the section ratio.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.4
• /
• pp.71-78
• /
• 2008

In the case of the railway bridges, uplift forces were occurred at the edge of the segments when vehicular loads were applied. These forces caused the compressive and tensile forces in the fastening system. In the past, a structural analysis has been performed to investigate the safety of fastening system which was modeled with one directional spring elements based on the compressive test of fastening system. In this case, the stiffness of the spring element was obtained from experimental study which was conducted by compressive load. Therefore, to perform rational and exact structural analysis, the translational stiffness of the fastening system obtained from the experimental study applied the tensile load and the rotational stiffness should be considered because it was occurred the tensile force as well as the compressive force in fastening system. In this study, an elastic and inelastic experimental study was performed for six specimens. The translational stiffness along the vertical axis of rail and the rotational stiffness along the strong axis of rail were investigated, also structural behavior of the fastening system was analyzed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.299-309
• /
• 2006

Railway noise and vibration has been recognized as major problems with the speed-up of rolling stock. As a kind of solution to these problems, the decrease of stiffness of track pad have been tried. However, in this case, overturning of rail due to lateral force should be considered because it can have effect on the safety of running train. Therefore, above two things - decrease of stiffness of track pad and overturning of rail due to lateral force - should be considered simultaneously for the appropriate determination of spring coefficient of track pad. With this viewpoint, minimum spring coefficient of track pad is estimated through the comparison between the theoretical relationship about the overturning of rail and 3-dimensional FE analysis result. Two kinds of Lateral force and wheel load are used as input loads. Extracted values from the conventional estimation formula and the Shinkansen design loads are used. It is found that the overturning of rail changes corresponding to the change of the stiffness of track pad and the ratio of lateral force to wheel load. Moreover, it is found that the analysis model can have influence on the results. Through these procedure, minimum spring coefficient of track pad is estimated.