• Spatial Information Research
• /
• v.14 no.3 s.38
• /
• pp.271-284
• /
• 2006

This study suggests the adjustment method of cadastral non-coincidence using spatial data referenced digital cadastral map and a present state. In designing the methodology, we should introduce the semi-automatic method for guaranteeing the stability and the accuracy at the arrangement of cadastral non-coincidence based on some cadastral specialist. This study could mainly show you rotation type, bias type, and rotation/bias type among cadastral non-coincidence types. We selected the matching reference point through the prototype system which automatically arranges in the study area. And then, we analysis the optimum rotation ratio(-0.4%). Finally, this paper show you calibrating cadastral non-coincidence using the rotation ratio. The methodology of this study has a limitation for arranging in case of cadastral non-coincidence by the area variation and some irregular types with unknown reason. Therefore, this case should be surveyed in direct method.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.707-708
• /
• 2008

본 논문에서는 초전도 플라이휠 에너지 저장장치 (Superconductor Flywheel Energy Storage System : SFES)의 에너지 변환을 위해 사용된 영구 자석형 전동 발전기(Permanent Magnet Synchronous Motor/Generator : PMSM/G)가 SFES의 에너지 저장효율에 미치는 영향을 평가하였다. SFES 시스템은 YBCO 벌크 초전도체를 이용한 저어널 타입(journal type)의 초전도 베어링을 사용하였으며, 슬롯리스 형 PMSM/G를 사용하였다. PMSM/G의 고정자 코어, 누설 자속 및 감겨진 코일에 의한 저장 에너지 손실을 측정하였다. 사용된 코어의 크기, 누설자속, 및 코일의 적절한 선정을 통하여 저장된 에너지의 손실을 상당히 줄일 수 있음을 확인하였다. 또한 영구자석과 코어가 동시에 회전하는 회전 코어형 전동발전기를 적용하여 에너지 손실을 매우 감소시킬 수 있음을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.47-49
• /
• 2005

최근의 선박 추진시스템은 기존의 엔진, 터빈 둥의 구동 원에서 선박의 발전기로부터 선체 외부의 프로펠러와 일체형으로 구성된 모터를 구동하여 추진하는 전기추진식으로 변화되고 있다. 특히, 히토류계 영구자석재질의 발달로 인하여 대형선박의 추진을 위한 대용량 자석계자형 BLDC와 영구자석형 동기전동기의 설계 연구가 활발히 이루어지고 있다. 그러나 여전히 MW급 대용량 BLDC 추진전동기의 설계 연구는 미흡한 실정이다. 이에 본 연구에서는 5MW급 대용량 BLDC 추진전동기 설계 연구를 진행하였으며, 그 결과 슬롯 수에 의한 고정자 형상이 다른 3가지 타입의 인버터 내장형 MW급 모델을 설계하였다. 그리고 이들 모델들을 정자계 유한요소법을 이용하여 해석함으로써 고정자 형상에 따른 회전특성을 분석하였고, 이를 바탕으로 본 설계 조건에 적합한 고정자 형상 설계 방향을 제시하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.1-7
• /
• 2010

PAPR of the pilot symbols can be reduced down by the CAZAC sequence in the SC-FDMA communication system. However, it is very complicated and takes quite a long time to compute the interpolation between the OFDM information symbols for the channel estimation because the pilot data are trasmitted in the block type. Furthermore, situation will be much more serious in the severe fading channel. Actually the pilot insertion of the comb type is much efficient and convenient for the channel estimation since the calculation of the interpolation can be made in the frequency domain symbol by symbol. But, the PAPR will be regrown when the pilot data are inserted with the information data in the comb type. So, in this paper, we like to study the PAPR reduction and comb type pilot assignment for the efficient channel estimation. Unlike the conventional SLM(selected mapping) method requiring the side information, our improved SLM method is to use the phase rotation sequence into information data without rotating phase of pilot. We use different pilot data according to the different phase rotation sequence. From the simulation result, it can be confirmed that when SLM method of 4 phase rotation sequence is used, PAPR is almost same to the block type method without pilot.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.2
• /
• pp.110-119
• /
• 2019

Proximal humerus fracture can be defined as a fracture that occurs in the surgical neck or proximal part of the humerus. Despite the appropriate treatment, however, various complications and sequelae can occur, and the treatment is quite difficult often requiring surgical treatment, such as a shoulder replacement. The classification of sequelae after a proximal humerus fracture is most commonly used by Boileau and can be divided into two categories and four types. Category I is an intracapsular impacted fracture that is not accompanied by important distortions between the tuberosities and humeral head. An anatomic prosthesis can be used without greater tuberosity osteotomy. In category I, there are type 1 with cephalic collapse or necrosis with minimal tuberosity malunion and type 2 related to locked dislocation or fracture-dislocation. Category II is an extracapsular dis-impacted fracture with gross distortion between the tuberosities and the humeral head. To perform an anatomic prosthesis, a tuberosity osteotomy should be performed. In category II, there are type 3 with nonunion of the surgical neck and type 4 with severe tuberosity malunion. In type 1, non-constrained arthroplasty (NCA) without a tuberosity osteotomy should be considered as a treatment. On the other hand, reverse shoulder arthroplasty (RSA) should be considered if types 1C or 1D accompanied by valgus or varus deformity or severe fatty degeneration of the rotator cuff. In general, the results are satisfactory when NCA is performed in type 2 sequelae. On the other hand, RSA can be considered as an option when there is no bony defect of the glenoid and a defect of the rotator cuff is accompanied. In type 3, it would be effective to perform internal fixation with a bone wedge graft rather than shoulder replacement arthroplasty. Recent reports on the results of RSA are also increasing. On the other hand, recent reports suggest that good results are obtained with RSA in type 3. In type 4, RSA should be considered as a first option.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.86-94
• /
• 1984

In order to improve the rotational performances of NC lathe spindle system in high speed range, a new type(Floating-type driven by V-belt)spindle system was optimally designed and experimented. Through the results of the experiments, the rotational performances of the new type spindle system was discussed and compared with the three equivalent conventional lathe spindle systems. The spindle rotational accuracy( radial error motion of spindle axis), the accelation and the temperature rise of the front spindle bearings for the non-cutting operation were considered as the spindle rotational performances. The radial error motion of the spindle axis was measured by applying the modified L.R.L. method. Compared with the equivalent conventional spindle systems, the following results were obtained. (1) The new type spindle system reduces the radial error motion of the spindle axis in high speed range(1800rpm-2000rpm). (2) The new type spindle system reduces the acceleration and the temperature rise of the spindle bearings considerably with increasing the spindle speed. It is also confirmed that, by this new type spindle system, the max. allowable speed can be increased with satisfying the spindle rotational performances.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.115-123
• /
• 2018

The primary objective of this study is to develop an all-in-one based steel pipe pile cutting robot prototype that improves the conventional steel pipe pile head cutting work in safety, quality, and productivity. For this, the following research works are conducted sequentially; 1)literature review and expert survey, 2)selection of core technology using AHP analysis, 3)deduction of detail design, 4)verification of structural stability, 5)development of full-scale prototype. As a result leveling laser and laser detector(94.46), plasma cutter(96.72), rotary grapple(98.45) are selected as a core technologies. As an outcome, it is analyzed that gripper, cylinder pivot bracket and gripper base are structurally stable. Their maximum stresses are shown as 43.0%, 19.4%, 5.3% compared to their yield strength respectively. The development of full-scale prototype in this study will be utilized for the development of the all-in-one attachment based steel pipe pile cutting robot commercialization model.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.533-534
• /
• 2011

본 논문은 고속블로워 시스템용 2상 4/2 SRM(Switched Reluctance Motor)과 3상 6/2 SRM의 토크 리플 최소화를 위한 가변 공극형 회전자 타입을 제안하고 그에 대한 특성 해석을 수행하였다. 연속적인 토크를 얻기 위하여 정 토크 구간을 확장할 수 있는 형상을 적용하고 고속에서의 리플을 최적화 할 수 있는 가벼 공극형 구조를 제안하였다. 기존에 제안되어진 2상 고속 4/2 SRM의 특성과 제안된 3상 고속 6/2 SRM의 특성을 FEM(Finite Elements Method) 해석을 통하여 비교해봄으로 고속에서의 개선된 토크 리플을 검증하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.201-204
• /
• 2021

본 연구에서는 휴대 할 수 있는 선형 LED 전광봉으로 2차원 LED 전광판 효과의 구현을 시도하였다. 전광봉을 회전하면 전광판의 효과가 나도록 구성한 것으로, adafruit의 스트립(strip) 형 네오픽셀(NeoPixel) 1 × 16 LED으로 형성되는 구조물을 만들고, 이를 제어 할 수 있는 회로와 제어 프로그램을 설계하고 구현하였다. 구현한 전광봉은 큰 전력 소모에도 문제없도록 리튬 이온 충전지를 이용하여 전원이 공급되도록 하여 휴대성을 구현하였고, 블루투스 칩이 부착된 아두이노를 이용하여 하드웨어 구성을 완료하였다. 아두이노에는 C++를 이용하여 전광봉으로 전광판 효과를 볼 수 있도록 LED들을 통제하는 제어용 프로그램을 구성하였을 뿐 아니라 블루투스를 이용한 스마트 폰과 통신할 수 있는 프로그램을 구현하였다. 대략 6도 단위로 LED가 제어 되도록 하여 1회전에 16 × 60 정도의 전광판 효과를 볼 수 있다. 스마트 폰에는 원하는 전광판을 구성할 수 있도록 색상 팔레트 형성 기능과, 통제용 전광판의 크기를 결정 기능, 크기가 결정된 전광판에서 원하는 색으로 홍보용 내용이 불이 켜질 수 있도록 전광판 구성 기능, 구성된 전광판 자료를 CSV(Comma Separate Value) 파일로 저장하고, 전광봉으로 보낼 수 있는 기능을 구성하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1529-1534
• /
• 2013

A voice coil actuator with a rotating moving magnet has been developed for a miniaturized mobile robot. The actuator has simple structure comprising a magnet, a coil, and a yoke. Actuator performance is predicted using a linearized theoretical model, and dynamic performance based on the air-gap between the magnet and the coil is predicted using motor constant and restoring constant obtained through finite element simulations. The theoretical model was verified using a prototype with 60 Hz resonance and 80 Hz bandwidth. We found that an input of 1.5 V can make the actuator rotate by $20^{\circ}$ statically. The driving configuration of the proposed actuator can be simplified because of its implementation of open-loop control.