• 한국유체기계학회 논문집
• /
• 제14권2호
• /
• pp.80-84
• /
• 2011

• 한국유체기계학회 논문집
• /
• 제5권1호
• /
• pp.95-98
• /
• 2002

• 소음진동
• /
• 제26권3호
• /
• pp.25-29
• /
• 2016

• 한국유체기계학회 논문집
• /
• 제11권1호
• /
• pp.100-104
• /
• 2008

• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.73-76
• /
• 2014

• 한국유체기계학회 논문집
• /
• 제13권1호
• /
• pp.69-73
• /
• 2010

• 한국유체기계학회 논문집
• /
• 제18권2호
• /
• pp.89-93
• /
• 2015

• Tribology and Lubricants
• /
• 제34권1호
• /
• pp.9-15
• /
• 2018

Modern high-performance automotive turbochargers (TCs) implement ceramic hybrid angular contact ball bearings in series with squeeze film dampers (SFDs) to enhance transient responses, thereby reducing the overall emission levels. The current study predicts the rotordynamic responses of the commercial automotive TCs (compressor wheel diameter = ~53 mm, turbine wheel diameter = ~43 mm, and shaft diameter at the bearing locations = ~7 mm) supported on ball bearings and SFDs for various design parameters of SFDs, including radial clearance, axial length, lubricant viscosity, and rotor imbalance conditions (i.e., amplitudes and phase angles) while increasing rotor speed up to 150 krpm. This study validates the predictive rotor finite element model against measurements of mass, polar and transverse moments of inertia, and free-free mode natural frequencies and mode shapes. A nonlinear rotordynamic model integrates nonlinear force coefficients of SFDs to calculate the transient responses of the TC rotor-bearing system. The predicted results show that SFD radial clearances, as well as phase angles of rotor imbalances, have the paramount effect on the dynamic responses of TC shaft motions.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.11-15
• /
• 2012

한국형발사체 상단엔진에 사용될 7톤급 액체로켓엔진용 터보펌프의 임계속도 해석이 이루어 졌다. 7톤급 터보펌프는 기 개발된 실험용 30톤급 터보펌프 및 현재 개발 중인 한국형발사체 1, 2단 엔진용 75톤급 터보펌프의 기본 개념을 채용하여 1축 터보펌프로 설계가 진행 중이다. 2개의 볼 베어링으로 지지되는 산화제펌프 회전체와 역시 2개의 볼 베어링으로 지지되는 연료펌프-터빈 회전체는 스플라인 축으로 연결되어 설계 속도에서 작동한다. 본 연구에서는 회전체동역학 해석을 수행하여 터보펌프가 sub-critical 회전체로서 충분한 임계속도 분리 여유를 확보하는 지를 검토하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.1056-1061
• /
• 2004

The vibration of rotor systems is caused by various factors, such as misalignment, unbalance, gear meshing, error of assembly, etc. Modal test and TDA/ODS analysis were done. The dynamic analysis of the armature was done with SAMCEF which is a commercial software for finite element and kinematic analysis. The transient response of the armature is calculated by the SAMCEF with the consideration of magnetic force and bearing stiffness, which are the essential elements for the design of high speed cutter. Main frequency of the vibration is due to the unbalance of the armature. The FEM analysis model considering unbalance and the high speed cutter have same vibration properties. The vibration sources of the high speed cutter is proved to be unbalance.