• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.12-19
• /
• 2010

In road network, especially in urban area, inefficiency of travel time is caused by signal control and turn maneuver at intersection and this inefficiency has substantial effects on travel time. When searching for the shortest path, this inefficiency which is caused by turn maneuver must be considered. Therefore, travel time, vehicle volume and delay for each link were calculated by using simulation package, PARAMICS V5.2 for adaptation of turn penalty at 16 intersections of Gangnam-gu. Turn penalty was calculated respectively for each intersection. Within the same intersection, turn penalty differs by each approaching road and turn direction so the delay was calculated for each approaching road and turn direction. Shortest path dealing with 16 intersections searched by Dijkstra algorithm using travel time as cost, considering random turn penalty, and algorithm considering calculated turn penalty was compared and analyzed. The result shows that by considering turn penalty searching the shortest path can decrease the travel time can be decreased. Also, searching the shortest path which considers turn penalty can represent reality appropriately and the shortest path considering turn penalty can be utilized as an alternative.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.1
• /
• pp.109-126
• /
• 2014

The level of service (LOS) of the Highway Capacity Manual (KHCM) has been used as a basic criterion at decision making processes for signalized intersections in Korea. The KHCM provides five steps for the signalized intersection analysis. Among them, lane grouping, which is the third step, significantly influence the final LOS. The current method presented in the KHCM, however, classifies a shared lane as a de facto turning lane group, even though the turning traffic of the shared lane is few. Thus, this research was initiated to provide an alternative. To this end, three alternatives were suggested, including the method based on the lane grouping presented in the U.S. Highway Capacity Manual, the method using turning ratio of shared turning lane, and the method using a threshold traffic volume in lane grouping. The feasibilities of the three methods were evaluated using a calibrated CORSIM model. Conclusively, the method using a threshold traffic volume in lane grouping outperformed.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.89-99
• /
• 2003

Considering a path represented by a sequence of link numbers in a network, the vine is differentiated from the loop in a sense that any link number can be appeared in the path only once, while more than once in the loop. The vine provides a proper idea how to account for complicated travel patterns such as U-turn and P-turn witnessed nearby intersections in urban roads. This paper proposes a new algorithm in which the vine travel pattern can be considered for finding K number of sequential paths. The main idea of this paper is achieved by replacing the node label of the existing Yen's algorithm by the link label technique. The case studies show that the algorithm properly represent the vine travel patterns in searching K number of paths. A noticeable result is that the algorithm may be a promising alternative for ITS deployment by enabling to provide reasonable route information including perceived traveler costs.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.223-233
• /
• 2014

This study empirically analyzes the relationships among the road and traffic experts' personal characteristics, the driving behavior and factors being expected to have an effect on the satisfaction about roundabout operation. The factors are drawn and grouped through the principle component analysis to clarify driving environment satisfaction on roundabout operation. Each group is named as personal attribute, driving behavior attribute, and satisfaction. After the variables are refined by confirmatory factor analysis, satisfaction model is developed with personal attribute and driving behavior attributes as exogenous variables and roundabout driving awareness and emotion attributes as endogenous variables. As a result, driving satisfaction of roundabout operation is directly influenced by delay reduction, safety improvement, capacity increase, sight improvement, severity accident reduction, and bicycle convenience and indirectly gender, age, driving time, and driving experience. Law obeyance, driving concession, traffic sign obeyance, and interposition do not statistically shows significant on satisfaction. As a result of Analytical Hierarchy Process (AHP), the turning radius of geometry and the driving behavior are important elements for roundabout safety.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.133-143
• /
• 2018

Roundabouts are generally installed at which traffic and pedestrian volume is relatively small intersections, and hence traffic can flow one direction around a circular island without traffic lights. A number of researches for roundabout signal metering have been processing ways to deal with operation efficiency drops in conditions of unusual traffic and pedestrian volume increases. However, there is still a shortcoming exists in previous operation algorithm does not consider the hidden vehicles between yield lines and detectors and queueing vehicles in circular lanes. These queueing vehicles between them can be cleared by introducing the queue clearance time. The purpose of this research is developing a real time signal metering operation algorithm by considering the vehicle queue clearance time. The results of varying queue clearance time application show that there is a substantial average vehicle delay reduction in VISSIM Com-Interface simulation. When the total number of entering vehicle is 3,200~4,800 vehicle/hour with varying queue clearance time application 21~50 seconds gives average delay reduction per vehicle by 16.1~71.7%.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.79-86
• /
• 1999

Traffic jams of our country are due to the shortage of roadway as compared with the traffic, however. they are sometimes due to inconsistency of the roadway capacity. Inconsistency of the roadway capacity comes from the difference of cycle length, phase length and number of Phase between major intersection and minor intersection. Specialty increasing number of Phase due to left-turn movements bring out decrease of the arterial capacity, deterioration of the arterial offset. The Purpose of this research is to introduce and analyze the continuous flow intersection to solve the bottleneck of the major intersection. The major contents of this research introduce the concept and design consideration for the continuous flow intersection and also analyze delay, fuel consumption and emissions among multiphase intersection, grade separated intersection and continuous flow intersection. This research analyze the sensitivities according to change of the left-turn traffic volume and also evaluate the cost-effectiveness through the total cost analysis among three of them.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.471-478
• /
• 2003

In the Signalized Intersection, the capacity analysis is conducted with a large amount of input data such as road way, traffic and signal condition. but the level of service(LOS) is determined by delay estimated as a measure of effectiveness (MOE) based on this procedure. However, It is under the circumstances which are not considered for the errors caused by the uncertainty of input data in the field(the turing volumes, lane geometry, signal timing, grade of approach lane, percentage heavy vehicles, peak hour factor and arrival type etc.) as become the bases in the determination of the capacity and LOS. It includes the problem of reliability which is not verified for the capacity and LOS estimated. So, this study is to suggest the minimization of their influences by examining whether the uncertainty of input data such as the traffic volume, percentage of heavy vehicles and roadway geometry on the approach lane in the intersection under the study affects the capacity analysis and LOS determination.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.39-47
• /
• 2018

The Dial Algorithm, based on single link based calculation, is unable to reflect cyclic paths arising in actual urban transportation networks. At the same time, redefining the paths more efficiently can, by strict standards, lead to irrational results stemming from reduction in the size of the network to be analyzed. To solve these two problems of the Dial algorithm, the research herein proposes a vine network method applied to a link based Dial Algorithm, in which the original three step alogrithm is modified into a vine network-based three step process. Also, an analysis of two case study networks show feasible replication of the predicted cyclic path, unrealistic flow, and unsteady transit, as well as alleviation of the problem of irrational path allocation.

• Journal of Korean Society of Transportation
• /
• v.21 no.3
• /
• pp.59-69
• /
• 2003

Signalized intersections are widely used in urban street network. However, it was reported that a roundabout is better than a signalized intersection in terms of delay when the approaching traffic volume for each bound is low. The objective of this study is to develop entry capacity models of roundabout and establish the warrant for signalized intersection based on the delay. The entry capacity of a roundabout is determined by the circulating traffic volume and the geometric design of the roundabout such as the diameter of central island, entry lane widths, and the circulating roadway width. The traffic and geometric characteristics of four roundabouts were collected and analyzed. The study reveals that; i)among the geometric features, the diameter of central island and the circulating roadway width influence the entry capacity, and ii)even though it is difficult to compare the models of each country due to different geometric features considered in the models, the models developed in this study show higher capacity than the models from Israel or Germany. These seem to be attributed to the facts that; i)the outside diameters of the roundabouts selected in this study are larger than in the other studies, and ii)the acceptable gap in Korea is smaller than that in the other countries. In order to compare the performances of round- about and signalized intersection, the performance of roundabouts was evaluated with the SIDRA. The simulation was conducted only for the roundabouts composed of single lane. According to the result of the analysis, it may be concluded that when the approaching traffic volume for each bound is lower than 600pcph, a roundabout is better than a signalized intersection in terms of its operational performance.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.4
• /
• pp.267-272
• /
• 2016

In the era of ultra high speed information communication technology represented by Smart phone and Tablet PC, the disable and the aged people came to be in a position of so-called 'relatively weak people' in the field of information communication due to inconvenience of use and difference in information acquisition and processing ability. Thus, a survey was conducted on Smart phone accessibility items based on previous studies of the disabled with crippled disorder, brain lesions, myelopathy and muscular disabilities having more inconvenience relatively in their use of smart phone due to upper limb dysfunctions. Especially, people with upper limb dysfunctions with relatively weak grip had big inconvenience in the conditions of uses requiring actions such as grabbing and rotating the devices, and due to the characteristics of touch screen input method of Smart phone, they had big inconvenience due to a lack of a guidance for keyboard in input. As a result of questionnaires by the type of disability, it turned out that severe myelopathy causes the most inconvenience in using smart phone.