• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.42-52
• /
• 2017

This was a study on the ultimate effect and characteristics of introducing a roundabout through a review of literature on the subject of roundabout. In order to examine an effect produced when roundabout is substituted for ordinary signal-controlled intersection operated at Daego Five-way Intersection and Seongmo Five-way Intersection located in Junggu, Daejeon Metropolitan City, site to be studied, the produced effect was analyzed through comparison between before and after introducing roundabouts in series at Daego Five-way Intersection and Seongmo Five-way Intersection by using microscopic traffic simulation program VISSIM widely used for analyzing an effect of roundabout based on a survey of geometric structure, traffic volume and signal interval on the site. As mentioned above, when Daego Five-way Intersection and Seongmo Five-way Intersection was changed to roundabout, a positive effect was produced on average speed and delay time in comparison with the existing status. It is possible to expect that roundabout can be more efficiently operated when 2 places on the site are changed to double roundabout than when separately changed to roundabouts.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.96-109
• /
• 2019

Roundabouts are actively installed to reduce unnecessary congestion and reduce traffic accidents. However, it is difficult to apply more than 450 cars per, hour. In addition, there is a downside to the concentration of delays in certain directions depending on traffic conditions. To compensate for these shortcomings, signal metering was introduced. Signal metering is a technique that gives red signals to adjacent left traffic flow in the event of a delay in a particular direction. The purpose of this study is comparing the effect of signal metering in conventional and special types (turbo roundabout, flower roundabout) of roundabout. VISSIM API is used for analysis. The analysis result show that only conventional roundabout signal metering algorithm reduce delay time per vehicle. As the result of the turbo roundabout and flower roundabout signal metering algorithm increase delay time per vehicle, signal metering algorithm can be applied in conventional roundabout.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.83-91
• /
• 2012

This study deals with the operational efficiency of roundabout. The roundabouts generally have such the merits as high capacity, delay reduction, safety improvement, and others. Circular intersection can be divided into the rotary and roundabout according to travelling priority. The objective of this study is to comparatively analyze the operational efficiency of rotary and roundabout by scenario. In pursuing the above, this study gives the particular attentions to developing 256 scenarios according to the directional and entering traffic volume and analyzing the delay using VISSIM. The main results are as follows. First, the average delay of rotary was analyzed to be 1.56-8.74 times of roundabout. Second, the operational efficiencies of rotary and roundabout were analyzed to be better in the case of bigger differences in the traffic volumes between the main and minor roads. Third, the average delay of the 4-legged was evaluated to be 1.77-11.70 times of 3-legged intersection. Finally, 2-lane intersection (3-legged & 4-legged) was analyzed to be 2.02-2.23 times of 1-lane intersection.

• Journal of Korean Society of Transportation
• /
• v.35 no.5
• /
• pp.385-395
• /
• 2017

This study deals with the small-scale roundabout. The purpose of this study is to analyze the average delay of vehicle in roundabout, and suggest the efficient planning and design standard. In pursuing the above, this study gives particular attentions to analyzing the average delay time according to the inscribed circle diameter, speed of circulatory roadway lane and traffic volume. The operational efficiencies of 96 scenarios (3 sizes of inscribed circle diameter ${\times}$ 4 types of circulatory roadway speed ${\times}$ traffic volume) are analyzed using VISSIM (Verkehr In $St{\ddot{a}}dten$-SIMulationsmodell). The main results are as follows. First, the optimal design speed of small-scale roundabout are derived from the above scenario analysis. Second, the traffic volume of LOS D is estimated to be 2,180-2,740pcph. Third, the traffic volume of LOS F that is required to improve is above 2.780pcph. The results might be expected to give some implications to providing the countermeasures for the operational efficiency of roundabout.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.24-31
• /
• 2011

This study deals with the operational effectiveness of roundabout. The roundabout is currently under consideration in our country depending on the result of existing researches, that the roundabout decreases delay and is environmentally friendly compared to the signalized intersection. The purpose of the study is to analyze the operational effectiveness of the roundabout by the change of pedestrian traffic volume. In pursing the above, this study gave particular emphasis to designing a network of roundabout, developing some scenarios for analysis including both entering traffic volume and pedestrians volume, and comparatively analyzing the average controlled delay time per vehicle. In this study, VISSIM model was used as a tool for traffic simulation. The main results are as follows. First, as a result of analyzing a traffic delay based on the pedestrian traffic volume, pedestrian traffic volume was analyzed to have a great impact on the roundabout operation. Second, the more pedestrian traffic volume were evaluated to indicate the more traffic delay. When the entering volumes with 1,000persons/hour (pedestrian volume) were more than 800pcph in the single-lane and 1,600pcph in the double-lane roundabout, the operational efficiencies of signalized intersections were evaluated to be better than those of roundabouts.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.322-324
• /
• 2010

교통량이 적은 신호교차로에서는 신호에 의한 불필요한 지체가 발생하는 경우가 많다. 특히 지방부 신호교차로의 경우 불필요한 신호 대기로 인해 운전자가 신호위반을 하거나 불필요한 지체를 경험하게 된다. 이를 해결하기 위한 방안으로 비교적 교통량이 적은 신호교차로를 회전교차로로 운영하여 해결할 수 있다. 본 연구에서는 지방부에 설치된 신호교차로를 분석하고 이를 회전교차로로 개선하였을 경우 그 효과를 비교분석하였다. 분석 결과 지체감소 효과가 있었으며, 통행시간 및 평균속도의 증가를 가져오는 것을 확인하였다. 또한 안전성 측면에서 교차로 상충횟수도 감소하는 것을 확인하였다.

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.218-226
• /
• 2014

This study examines a way to install a crosswalk that can improve pedestrians' convenience and safety and that goes beyond the crosswalk design standard of existing roundabouts. When a scrambled crosswalk, one of the crosswalk installation methods, is introduced to the roundabout system, it shortens the cross-walking distance of pedestrians and thus enhances convenience. Although the installation of a scrambled crosswalk may enhance pedestrians' convenience, it may obstruct vehicular traffic. Thus, this study presents standards for reasonable diagonal crosswalk installation based on the investigation on its effects on a vehicle's delay time. This study includes an analysis of the various geometric structures of roundabouts. The study results show that as v/c and the number of pedestrians increased, the delay time after the installation of a scrambled crosswalk increased although the extent was different. In general, the effect of the installation of a scrambled crosswalk was insignificant regardless of the number of pedestrians when v/c was under 0.6. When the number of pedestrians was 300/hour or lower, the difference in the delay time was quite insignificant regardless of v/c. In addition, as the inscribed circle of the roundabout was larger, the difference in the delay time decreased depending on v/c and the number of pedestrians.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.65-74
• /
• 2010

This study aims at developing a method for estimating passenger car equivalency (PCE) values for various vehicle types that could be considered in estimating capacity and delay at intersections without traffic signals, especially at modern small 3-leg roundabouts. Unlike signalized intersections, the PCE value has not yet been treated explicitly in traffic operations involving unsignalized intersections. Both empirical and theoretical approaches for determining the PCE values at modern small 3-leg roundabouts were evaluated. As a result, the PCEs derived in this study were highly correlated with those of field measurements.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.7-16
• /
• 2009

Korea Highway Capacity Manual (2001) proposes only LOS(Level of Service) analysis method on non-control and two-way-stop intersections, not dealing with the analysis method on LOS for roundabouts, nor even including the term 'roundabout'. This study selects proper MOEs for roundabouts and criteria the LOS through simulation analysis. To attain this goal, the authors reviewed the methods to select proper MOEs in the first step, criteria the Los. For this study, the MOEs were chosen from existing literature, and used for the criteria. The MOEs to be applied to roundabouts in this research were entry traffic volume, v/c (volume/capacity) ratio, and average vehicle delays. The results showed that the maximum entry traffic volume(LOS F) at local one-lane roundabout was analyzed to be 1,700pcph and average vehicle delay 18 seconds LOS A was analyzed as 700pcph and average vehicle delay 3 seconds and v/c 0.41 in this case Maximum entry traffic volume(LOS F) at local area 2 lane roundabouts was analyzed as 2,900pcph and their average vehicle delay as 31 seconds LOS A was analyzed to be 1.500pcph and average vehicle delay 8 seconds, v/c 0.52.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.707-714
• /
• 2021

An important factor that causes delays at roundabouts is unbalanced traffic conditions. The majority of domestic studies have tendedto focus on the proportion of entering traffic rather than conflicting traffic in order to explain unbalanced traffic conditions. Also, there is scant research on the proper distance between a signalized intersection and a roundabout. In this study, therefore, unbalanced traffic conditions and optimal distance between two intersections were analyzed using SIDRA software based on the Gajwa-ro roundabout in Icheon, where unbalanced traffic conditions occur during afternoon peak hours, and its position is 295 m from a signalized intersection. It was found that a state of unbalanced traffic conditions in the form of conflicting traffic caused delays at Gajwa-ro roundabout, and the queuing length on each approach was removed when there was 850 m of distance between two intersections.