• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.922-925
• /
• 2000

Generally, the machining accuracy in ball end milling directly depends on the rotational accuracy affected by the spindle speeds. The effects of spindle speeds for rotational accuracy in the high speed regions are more dominant than those in the low speed regions. This paper will investigate effects that the Increased speed affects on the rotational error according to the increase of a rotational speed and machining characteristics of the high speed ball-end milling in various rotational speeds and on various materials by using the high speed air-bearing spindle.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.11
• /
• pp.2723-2729
• /
• 1993

Moire principles are applied to the measurement of the spindle radial error motion. As opposed to conventional techniques, no master cylinder or ball is needed in the measurement so that the offset and out-of-roundness errors of the master can be inherently eliminated. Two periodic circular gratings are used, one is made on the spindle and the other is held stationary on the reference frame. When the two gratings are seen superimposed during spindle rotation, an interference fringe pattern is observed from which the information on the eccentricity between the two gratings can be extracted with high precision. The optical design and fringe analysis techniques of a prototype measurement system are described in detail with exemplary measurement results.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.466-470
• /
• 2000

Externally pressurized air journal bearing has been widely used in high-speed spindle system and precision machinery because of its characteristics such as substantially low frictional loss, low heat generation and averaging effect leading better running accuracy. But air journal bearing have a disadvantage of the low load capacity due to the low viscosity. In this paper, The air journal bearing design to overcome the defects of air bearing such as low stiffness and dimping coefficients was investigated theoretically.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.247-248
• /
• 2014

유도 전동기의 센서리스 방법 중 적응 자속 관측기 기반의 센서리스 제어는 유도 전동기의 고정자 전압과 전류로부터 정지 좌표계 상의 고정자 전류와 회전자 자속을 추정하고, 추정된 회전자 자속과 고정자 전류 추정 오차로부터 회전자 속도를 추정하는 방식으로, 산업계에서 널리 사용되는 유도 전동기 속도 센서리스 제어 방식 중 하나이다. 기존의 적응 자속 관측기는 중/고속에서의 전류 추정 성능이 저하되어 중/고속에서의 제어 성능이 저하되는 단점이 있어 왔다. 본 논문에서는 이러한 단점을 개선하기 위한 개선된 적응 자속 관측기의 설계 방법을 제안하고 3.7kW 유도 전동기를 이용한 실험을 통하여 제안된 방식의 성능을 검증한다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.167-173
• /
• 2013

Purpose: This study is to evaluate the efficacy of the CBCT and EXACTRAC the image on the spine stereotactic body radiation treatment. Materials and Methods: The study compared the accuracy of the dose distribution for changes in the real QA phantom for The shape of the body of the phantom was performed. Novalis treatment artificially set up at the center and to the right, on the Plan 1 mm, 2 mm, 3 mm in front 1 mm, 2 mm, 3 mm and upwards 1 mm, 2 mm, 3 mm and $0.5^{\circ}$ by moving side to side Exactrac error correction and error values of CBCT and plan changes on the dose distribution were recorded and analyzed. Results: Cubic Phantom of the experimental error, the error correction Exactrac X-ray 6D Translation in the direction of the 0.18 mm, Rotation direction was $0.07^{\circ}$. Translation in the direction of the 3D CBCT 0.15 mm Rotation direction was $0.04^{\circ}$. DVH dose distribution using the results of the AP evaluate the change in the direction of change was greatest when moving. Conclusion: ExacTrac image-guided radiation therapy with a common easy and fast to get pictures from all angles, from the advantage of CBCT showed a potential alternative. But every accurate information compared with CT treatment planning and treatment of patients with more accurate than the CBCT ExacTrac the location provided. Changes in the dose distribution in the experiment results show that the treatment of spinal SBRT set up some image correction due to errors at the target and enter the spinal cord dose showed that significant differences appear.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.3-4
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.33-34
• /
• 2007

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.497-498
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.471-472
• /
• 2010

• 한국항공운항학회:학술대회논문집
• /
• 2016.05a
• /
• pp.26-29
• /
• 2016

본 논문에서는 멀티로터 시스템의 모델리을 위한 방법으로 파라미터 추정법을 제시하였으며 이를 위해 실제 비행데이터를 이용한다. 파라미터 추정법으로는 예측오차 기법과 순화최소자승법이 사용되었고 그 결과를 나타내었다.