• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.864-865
• /
• 2007

외전형 유도전동기는 내전형에 비해 회전자가 외부에 존재하는 특징을 가지고 있어서 제품의 소형화 및 경량화를 시킬 수 있다는 장점이 있다. 하지만 외전형은 회전자의 직경이 내전형에 비하여 크기 때문에 조립 공정상에 존재하게 되는 회전자와 고정자간의 이심률에 따른 제품 전체의 불균형력이 상대적으로 크며, 이로 인해 모터의 정속적인 운전 방해 및 불규칙한 출력토크로 인한 제품 작동상의 오류발생이 더 크게 나타난다. 본 논문에서는 외전형 유도전동기에서 존재하는 이심률의 크기에 따른 불균형력이 최소화 될 수 있는 슬롯형태를 찾기 위해 회전자 슬롯의 형태를 전폐형, 반폐형, 개구형태의 3가지형태로 변경시킨 후, 이를 전자장 해석을 통해 불균형력을 비교하였다. 또한 이심률이 증가함에 따라 나타나는 불균형력의 증대를 슬롯 형태에 따라 비교 분석하여, 불균형력에 최적화된 외전형 모터의 슬롯형태를 알아보았다.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.214-222
• /
• 2001

The purpose of this research it to develop gas-air rotary heat exchanger using heat pipe and the performances were examined by way of the theoretical analysis and the experiment. Centrifugal force to return the working fluid in heat pipe elements with different radius was evaluated as a function of the revolution speed and inclination angle, and a rotary heat exchanger with 60 heat pipes in 3 rows was designed and manufactured. The inclination angle of a heat pipe relative to the revolving axis was designed to be 2$^{\circ}$and water was used as a working fluid. Experimental result showed the heat exchange rate was enhanced by 16% with compared to the calculated value.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.06a
• /
• pp.26-29
• /
• 1986

회전축계의 강제진동으로 가장 전형적이고 공업상 중요한 것은 넓은 의미로서 불평형 진동이다. 불평형은 회전체의 제작상 피할 수 없으며 진동이 전혀 문제가 되지 않는 정도로 제작하는 것은 경제적인 면에서도 불가능하다. 지금까지 미끄럼 베어링으로 지지된 회전축계의 불평형 응답 특성에 대하여는 여러 연구자에 의해 연구가 진행되고 있다. 수중에서 운전되는 펌프는 물의 감쇠작용 때문에 축진동 문제는 적다고 생각되어 펌프의 축진동에 관한 보고는 별로 없다. Black은 펌프의 축진동을 연구하여, 시일부분이 축진동 응답에 큰 영향을 미치는 것을 보였다. 그러나 시일형상에 따른 유체력 평가가 충분히 구명되지 않았기 때문에 환상 시일부분의 틈새,폭경비 및 압력차 등이 펌프진동에 어느 정도 영향을 미치는가가 충분히 검토 되어 있지않다. 이에 저자는 펌프용 시일의 유체력에 의한 진동 특성에 관한 일련의 연구를 진행하여 각종 시일의 유체력을 해석하였고, 이 유체력이 회전축계의 안정성에 미치는 영향을 검토하였으며 범용 안정성해석 프로그램을 개발하였다.

• The korean journal of orthodontics
• /
• v.37 no.6
• /
• pp.400-406
• /
• 2007

The purpose of this experimental study was to evaluate the effect of immediate orthodontic loading on the stability at the bone-implant interface of titanium miniscrews in a rabbit model. Methods: Forty titanium miniscrews (1.6 mm diameter, 8 mm length) were inserted in the tibiae of 10 rabbits. Twenty test group miniscrews were subjected to continuous orthodontic forces of 200g immediately after implantation for a period of 6 weeks. The remaining 20 control group miniscrews were left unloaded for the same follow-up interval. Removal torque values were recorded using a digital torque gauge. An independent t-test was performed. Results: All the miniscrews were stable, and exhibited no mobility or displacement throughout the experimental period. Histologically, miniscrews were well-integrated into bone. No statistically significant differences in removal torque data were found between the loaded test and the unloaded control groups. Conclusions: These findings suggest that titanium miniscrews can be used as anchoring units for orthodontic tooth movement immediately after insertion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.4
• /
• pp.396-408
• /
• 2008

Statement of problem: Within the elastic limit of the screw, the greater the preload, the tighter and more secure the screw joint. However, additional tensile forces can incur plastic deformation of the abutment screw when functional loads are superimposed on preload stresses, and they can elicit the loosening or fracture of the abutment screw. Therefore, it is necessary to find the optimum preload that will maximize fatigue life and simultaneously offer a reasonable degree of protection against loosening. Another critical factor in addition to the applied torque which can affect the amount of preload is the joint connection type between implant and abutment. Purpose: The purpose of this study was to evaluate the influence of tightening torque on the implant-abutment screw joint stability. Material and methods: Respectively, three different amount of tightening torque (20, 30, and 40 Ncm) were applied to implant systems with three different joint connections, one external butt joint and two internal cones. The initial removal torque value and the postload (cyclic loading up to 100,000 cycles) removal torque value of the abutment screw were measured with digital torque gauge. Then rate of the initial and the postload removal torque loss were calculated for the comparison of the effect of tightening torques and joint connection types between implant and abutment on the joint stability. Results and conclusion: 1. Increase in tightening torque value resulted in significant increase in initial and postload removal torque value in all implant systems (P < .05). 2. Initial removal torque loss rates in SS II system were not significantly different when three different tightening torque values were applied (P > .05), however GS II and US II systems exhibited significantly lower loss rates with 40 Ncm torque value than with 20 Ncm (P < .05). 3. In all implant systems, postload removal torque loss rates were lowest when the torque value of 30 Ncm was applied (P < .05). 4. Postload removal torque loss rates tended to increase in order of SS II, GS II and US II system. 5. There was no correlation between initial removal torque value and postload removal torque loss rate (P > .05).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.80-80
• /
• 2004

베어링리스 모터는 기존의 전동기와 자기베어링을 결합한 기술로 축 길이가 줄어들어 회전 속도를 높일 수 있으며 소형화가 가능하다는 장점이 있다(Fig. 1). 베어링리스 모터를 설계하기 위한 첫 번째 단계는 베어링리스 모터의 수학적 모델을 도출하는 것인데, 기존의 연구에서 부상용 전류와 부상력의 관계는 잘 정립되어 있다. 그러나, 회전자의 변위에 따른 부상력의 변화는 명확히 정의되어 있지 안다. 본 논문에서는 분산 자기 회로 이론을 이용하여 회전자의 움직임에 따른 부상력의 변화를 스프링계수의 형태로 모델링하였다.(중략)

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.157-169
• /
• 2009

The aim of this study was to evaluate effect of implant abutment screw coating treatment on joint stability, investigating mechanical properties of these. For this study used $ExFeel^{(R)}$ external hexed implant system and $15mm{\times}1mm$ discs. Experimental group was $1{\mu}m$ TiN, TiCN, TiC coated abutment screws and discs. To know mechanical property, i evaluated adhesion strength, surface hardness, using disc, corrosion test using screw. The results were as follows : rotation angle of coated screws increased than that of non-coated screw because of lower friction coefficient, especially TiC coated screw group had the largest value, but removal torque decreased in all coated screws (p<0.05). Torque loss before and after fatigue test was the smallest in TiC-coated screws, and the largest in non-coated screws (p<0.05), and there was no statistically significant difference between dry condition and wet condition of screws because of higher surface hardness and lower friction coefficient. From the above results, TiN, TiCN, TiC coating group had high abrasion resistance, especially TiC coated group which had low torque-consuming, high rotation angle as low friction coefficient will be considered to influence on implant abutment screw joint stability positively.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.12-16
• /
• 2010

본 연구에서는 건설현장의 특별 피난계단 출입문 크기와 구조의 다양성을 고려한 자동폐쇄장치의 설계방안을 제시하였다. 이를 위해서 급기가압실의 방연풍속, 누설량 그리고 송풍기의 용량이 일정한 경우 출입문이 폐쇄되기 위한 힘의 상관관계를 회전각도와 회전속도의 변화에 따라서 분석하였으며, 방화문의 폭이 1,100 mm, 1,300 mm 인 경우 각각에 대해서 개방력과 폐쇄력을 측정하였다. 그 결과 현장 조건을 만족할 수 있는 자동폐쇄장치에 의한 방화문의 폐쇄조건 및 회전각도와 회전속도의 변화를 고려한 개방력과 폐쇄력의 최적 설계범위가 존재함을 확인하였다.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.328-336
• /
• 2008

Objective: The purpose of this study was to compare the torque resistance to removal of sandblasted large grit and acid etched (SLA) surface treated orthodontic mini-implants and smooth surface orthodontic mini-implants as well as performing histologic observations. Methods: Two groups of custom screw shaped orthodontic mini-implants (C-implant, 1.8 mm outer diameter $\times$ 9.5 mm length, Cimplant, Seoul, Korea) were designated. 22 SLA treated C-implants (SLA group) and 22 machined surface C-implants (machined group) were placed in the tibia metaphysis of 11 adult New Zealand white rabbits. Following a 6-week healing period, the rabbits were sacrificed. Subsequently, the C-implants were removed under reverse torque rotation with a digital torque measuring device and independent t-test was performed. Selected tissues were prepared for histologic observation. Results: The SLA group presented a higher mean removal torque value (6.286 Ncm) than the machined group (4.491 Ncm) which was statistically significant (p < 0.005). Histologic observation revealed a trend of more new bone formation in contact with the screw surface in the SLA group than the smooth group. Conclusions: The results of this study suggested that SLA surface treatment can enhance the osseintegration potential for C-orthodontic mini-implants.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06c
• /
• pp.421-423
• /
• 2012

본 논문에서는 빠르게 회전하는 공에 대한 바운싱 모델을 제시한다. 제안하는 바운싱 모델은 충격량을 기반으로 공의 회전력, 지면의 탄성 및 마찰력을 고려한다. 제안된 모델의 정확도를 측정하기 위해 그린, 페어웨이 및 러프 지형에서 공의 궤적을 촬영하고, 영상으로부터 공의 실제 궤적을 추출하여 비교한다. 시뮬레이션 모델은 실제 궤적을 기반으로 튜닝함으로써 정확도를 향상시킨다. 본 바운싱 모델은 실감형 스포츠 게임에서 보다 사실감을 높일 수 있다.