• Korean Architects
• /
• s.537
• /
• pp.82-83
• /
• 2014

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.32-39
• /
• 2018

Repairing timing and the extended service life with repairing are very important for cost estimation during operation. Conventionally used model for repair cost shows a step-shaped cost elevation without consideration of variability of extended service life due to repairing. In the work, RC(Reinforced Concrete) Column is considered for probabilistic evaluation of repairing number and cost. Two mix proportions are prepared and chloride behavior is evaluated with quantitative exterior conditions. The repairing frequency and cost are investigated with varying service life and the extended service life with repairing which were derived from the chloride behavior analysis. The effect of COV(Coefficient of Variation) on repairing frequency is small but the 1st repairing timing is shown to be major parameter. The probabilistic model for repairing cost is capable of reducing the number of repairing with changing the intended service life unlike deterministic model of repairing cost since it can provide continuous repair cost with time.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.241-246
• /
• 2002

본 연구는 농산물을 건조할 때 배풍구로 버려지는 열을 회수하여 건조열원으로 재이용할 수 있는 배풍열 회수장치를 개발하여 연료절감 및 열회수장치의 성능을 분석한 연구 결과 다음과 같은 결론을 얻었다. 가. 농산물건조기의 열수지를 분석한 결과 투입열량을 100%로 하였을 경우, 배기열은 13.2%, 배풍역량 77.7%, 관류열량은 9.1%로 나타났다. 나. 고추를 건조시 배풍구입구온도가 55-6$0^{\circ}C$일 때 배풍구 출구온도 41-43$^{\circ}C$, 일때 흡입구 입구온도는 25-28$^{\circ}C$, 흡입구 출구온도는 41-43$^{\circ}C$로 나타나 건조실로 41-43$^{\circ}C$의 높은 온도를 투입할 수 있었다. 다. 배풍열 량이 단위 시간당 4700kca1에서 6000kca1로 증가할 때, 흡입 열량은 2200kca1에서 3000kca1로 나타났다. 라. 고추의 초기함수율이 80%에서 15%까지 떨어지는데 관행건조는 약 27시간이 경과했으며, 배풍연회수건조를 할 경우는 약 24시간이 경과했으며 그 결과 배풍열 회수건조가 약 3시간정도 소요시간이 단축되었음을 알 수 있었음. 마. 배풍열 회수장치를 사용하여 농산물건조기 투입량의 47%, 배풍열량의 64%의 열량을 회수할 수 있었다. 바. 배풍열 회수 농산물건조기 성능시험 결과 고추 100kg 건조시 연료소모량은 43%, 건조 소요비용은 21% 감소시킬 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.196-197
• /
• 2016

신재생 에너지와 배터리를 이용하여 소규모로 계통을 구축하여 부하에 전기를 공급하는 시스템을 Microgrid라 한다. 태양광 모듈과 배터리의 성능 향상 및 가격 경쟁력 강화로 인하여, Microgrid는 오지에 전기를 공급하거나 기존 디젤 발전시설을 대체하거나 운영 비용을 감소하는 용도로 각광 받고 있다. 본 논문에서는 디젤 발전기와 강에서 유체동력 발전기로 전기를 공급하는 시스템에 태양광과 배터리를 설치하여 기존 발전 비용을 최소화 하면서 최단 시간내에 투자 비용을 회수할 수 있는 솔루션을 제안한다.

• Economic and Environmental Geology
• /
• v.37 no.1
• /
• pp.113-119
• /
• 2004

Mineral wastes are generated by the minerals, mining, and metal industries. These are generally inorganic waste streams of mainly waste rock or residues from refining during extraction of metals or minerals from the ore. There are many plants where minerals are recovered in secondany circuits, treating tailings, where the feed grades are much lower than would be economic on a mined ore. The world is now becoming aware of the finite nature of its resources at a price, and of the ever-increasing development costs of large new mines. Reprocessing of old tailings on a large scale must be worth examining very seriously by those with access to sufficient material of this type. In the present paper, mineral separation techniques to recover valuable metals and resources from the old tailings are reviewed, and new trends for future developments are also discussed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.293-301
• /
• 2008

The purpose of this study is price determination for KLIS (Korea Land Information System) which Korea government established. For this purpose, I analyzed cost accounting and made the KLIS selling price according to selling amount, recovery rate and information volume. In case of recovery rate, the cost was expensive but, in case of information volume the cost was cheap. So, the price determination for KLIS should be resonable according to information volume considering GIS revitalization.

• Journal of the Korean institute of surface engineering
• /
• v.16 no.3
• /
• pp.87-97
• /
• 1983

석출전위가 낮은 금속들을 저농도용액에서 전기분해하여 회수하는 방법에 대해 아연과 카드뮴을 모델로 삼아 채취방법을 연구하였다. Hull cell과 hyperbolic twin cell에서 시험해서 전류밀도와 효율이 낮기 때문에 기존방법으로는 회수속도가 매우 느린 것을 알 수 있었다. 전해 채취조건을 좋게 하기 위해서는 음극의 표면적을 크게 하고 흔들어 주며, 또 전해액을 강제 순환시켜 물질이동이 잘 되도록 해야만 한다. Rotating tubular bed reactor 나 impact rod reactor 같은 전해조를 사용하여 여러 종류의 용액 중의 아연과 카드뮴 전해 채취 실험을 하였다. 특히 카드뮴의 잔류농도를 낮추기 위해서는 전해법과 이온교환법을 같이 사용하는 것이 유용하다. 새로운 방법의 처리비용과 기존방법의 처리비용을 비교하여 보았다.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.16-23
• /
• 2024

The electrolysis for extracting magnesium from seawater or brine primarily involves recovery of magnesium via precipitation as the form of magnesium hydroxide. The technology is classified into cation-exchange membranes (CEM), anion-exchange (AEM) membranes, electrodialysis, and membraneless methods. Recent research has focused on enhancing the efficiency and selectivity of magnesium recovery from seawater or brine containing magnesium, with expectations of effective magnesium recovery even with normal seawater. In a future, the optimization of the selective and efficient recovery of magnesium and various valuable substances through long-term operation of scaled-up systems is crucial with enhancing economic and environmental viability. It is essential to realistically estimate operational costs considering the membrane's lifespan and replacement cycle. Also, detailed and practical process models should be developed based on monitoring data on various factors.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.117-123
• /
• 2007

This paper is about the economic analysis of the replacement of electric facilities in the production facilities. As the interest of energy is increasing, the efficiency of facilities become more important. So, in this paper, we diagnosed facilities, especially electric motors, in the plant and calculated the operating efficiency, power loss with the load factor. And when we replace these facilities into high-efficiency motors, we also calculated new energy efficiency, energy loss and economic analysis through capital recovery factor. As a result, we economically proved that using high-efficiency motor is more beneficial than using non-high-efficiency motors in the model process.

• Journal of the Korean Institute of Gas
• /
• v.21 no.2
• /
• pp.1-9
• /
• 2017

Enhanced coalbed methane recovery (ECBM), as injecting $CO_2$ or $N_2$ into the coalbed methane (CBM) reservoir for increasing methane recovery, takes center stage in these days. ECBM makes a better recovery than the conventional production method, it called dewatering process. However the characteristics of injection gas affect to methane recovery, thus analysis on the mixed ratio of injection gas should be required. In this study, CBM reservoir model was built to estimate the methane recovery of ECBM method by different mixed ratio of injection gas. Additionally, to consider the characteristics of injection gas such as carbon captured storage, nitrogen re-injection, etc. economic analysis was performed. The results showed that ECBM cases produced methane almost twice as much as dewatering case and $CO_2$ 10% and $N_2$ 90% case resulted in the highest methane recovery among the mixed gas cases. On the other hand, the results of economic analysis showed that $CO_2$ 20% and $N_2$ 80% case made the highest total production profit. Therefore, both the recovery of methane and economical efficiency should be considered to apply ECBM process.