• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.304-310
• /
• 2004

Resistance performance of small size fishing vessel is experimentally investigated to find out the effect of fore-body shape and trim for the better hull from development. The tests are performed for five different cases in the high speed circulating water channel(CWC). Wave patterns are observed to investigate the relation between the resistance performance and the wave characteristics.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.1-8
• /
• 1989

The flow characteristics of a circulating water channel which is appropriate for a flow measurement and visualization in the laboratory has been investigated by using a Laser Doppler Anemometer. In order to get a stable and uniform distribution of mean velocity at the test section, the surface flow accelerator is designed and used. The experimental results that the turbulent structure should be considered with the mean velocity for obtaining the reasonable uniformity at the test section.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.12-20
• /
• 1997

A potential-based panel method has been developed to investigate the resistance characteristics of a high speed catamaran advancing on the free surface. Normal dipoles and sources are distributed on the body surface while sources are distributed on the free surface. Linearised free surface conditions are used in the present analysis. To avoid the instabilities due to the velocity difference between inner and outer flow of a high speed catamaran, Kutta condition has been applied at the stern. Model test has been carried out not only to validate the numerical results but to confirm the capabilities of a CWC(Circulating Water Channel). It is believed that we can obtain the qualitatively reasonable results in the CWC. Computed results are compared with those of experiments and Insel's experimental values. Since the Kutta condition is applied at the stern, stable solutions are obtained at the high speed range. The present method, using linearised free surface conditions at the high speed range, seems to be a useful tool in the hull form design of a high speed catamaran.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.334-341
• /
• 2015

This study is to evaluate hydrodynamic performance evaluation between three kinds of inflatable kayaks, that is, a frame kayak, a needle knife kayak, and a v-hull kayak. In order to test, inclining and turning trial test are performed in the Ocean Engineering Basin. Also, a resistance test is performed with a reduced scale kayak in the circulating water channel. Consequently, First, the moment arm of a v-hull kayak is the largest with 132.4mm, but turning radius of one was the smallest of them. Second, the resistance of a needle knife kayak is the smallest with 71N, the center of gravity of one was the lowest with 0.128m of them, and then needle knife kayak occurs in a draft overall. Consequently, the v-hull kayak has had the advantages on restoring force and turning performance than others. The needle knife kayak has been more excellent on resistance and center of gravity than others.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.4
• /
• pp.22-29
• /
• 2003

New high-speed depressurized circulating water channel was designed by using the CFD code. Flow in the channel has free surface and pressure in the test section can be depressed. In this study, Flow separation and bubble occurrence were considered in designing the contraction nozzle shape for better flow uniformity Tn the test section. To supplement velocity defect due to the free surface, nozzle injection system more effective in high-speed flow was installed instead of drum system. Necessary power and injection techniques were proposed. And guide vane arrangement was analyzed to reduce the flow resistance and keep quiet free surface from ´surging´. Wave absorber was devised to reduce the wave resistance and to prevent the entrainment of air to the diffuser.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.107-112
• /
• 1997

본 연구는 자유표면 인삭을 위한 실험 기법 개발에 관한 연구이다. 2차원 수중익에 의해 발생되는 자유표면파를 연구대상으로 삼았다. 실험은 회류수조에서 행하였다. NACA 0012 수중익을 여러가지 길이와 2가지양각에 대해서 실험한 결과 생기는 비선형 자유표면 파를 인식할 수 있도록 영상처리 기술을 도입하였다. 실헙결과 얻은 자유표면 형상을 다른 연구자의 결과와 비교하였다. 비교결과 영상처리의 기법이 자유표면을 인식하는데 대단히 유용한 도구임을 알 수 있었다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.84-89
• /
• 2000

Thermal simulation of typical stack-type and newly proposed planar-type micro-gas sensors were studied by FEM method. The thermal analyses for the proposed planar structure including temperatur distribution over the sensing layer and power consumption of the heater were carried using finite element method by computer simulation and well compared with those of typical stack-type micro-gas sensor. The thermal properties of the microsensor from thermal simulation were compared with those of a actual device to investigate the acceptability of the computer simulation.

• Journal of Korea Ship Safrty Technology Authority
• /
• v.6
• /
• pp.76-84
• /
• 2001

수중익선과 같은 고속선의 경우 수중익이 수면근처에 접근하면 여러형태의 파를 유기하게 되며 그에 의한 압력의 변화를 유발시킨다. 이에따라 양력이 감소하고 조파저항이 증가하다가 한계 Froude 수에 이르게 되면 파가 더이상 자신의 형태를 유지하지 못하고 부서지는 쇄파가 발생하면서 조파저항은 감소하고 그대신 쇄파저항이 급격히 증가하게 된다. 이에대한 연구의 한 방법으로 수면하에서 정속으로 움직이는 수중익에 의하여 생성되는 정상파 및 쇄파현상에 대한 연구를 회류수조에서 수행하였다.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.105-112
• /
• 1999

This research is an experimental investigation of the region of the Biased Flow. This experiment was carried out in a circulating water channel, and the results are analyzed by using the PIV technique. The results are presented in velocity vector field, velocity contour and vorticity contour. The results were compared with those of Zdravkovich which were carried out in a wind tunnel. These results will be very useful to verify numerical codes.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.45-46
• /
• 2001

PIV(Particle Image Velocimetry : 입자영상유속계)는 유동장에 분포된 추종입자의 위치를 영상처리에 의해 자동추적 함으로써 속도벡터를 전유동영역에 걸쳐 동시에 구할 수 있는 계측기법이다. 따라서, CFD와 같이 정량적 및 정성적으로 수치해석된 결과와 바로 비교 검토가 가능한 유일한 실험기법으로 인식되고 있다. 본 실험에서는 CFD에 의한 모형의 유체유동 특성을 분석하고 이를 회류수조에서 PIV를 이용해 모형 전개판 주위의 유체흐름을 분석하여 각 전개판 모형의 유체유동 특성을 파악하였다. (중략)