• Proceedings of the Korean Ceranic Society Conference
• /
• 2004.04b
• /
• pp.35.2-35.2
• /
• 2004

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.04a
• /
• pp.298-299
• /
• 1999

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.2
• /
• pp.51-56
• /
• 2019

$H_2S$ is a detrimental impurity that must be removed for upgrading biogas to biomethane. This study investigates an economic method to mitigate $H_2S$ content, combining scrubbing and aeration. The desulfurization experiments were performed in a laboratory apparatus using EDTA-Fe or landfill leachate as the catalyst and metered mixture of 50-52% (v/v) $CH_4$, 32-33% (v/v) $CO_2$ and 500-1,000 ppmv $H_2S$ balanced by $N_2$ using the C city landfill gas. Dissolved iron concentration in the liquid medium significantly affected the oxidation efficiency of sulfide. Iron components in landfill leachate, which would be available in a biogas/landfill gas utilization facility, was compatible with an external iron chelate. More than 70% of $H_2S$ was removed in a contact time of 9 seconds at iron levels at or over 28 mM. The scrubbing-aeration process would be a feasible and easy-to-operate technology for biogas purification.

• Clean Technology
• /
• v.21 no.2
• /
• pp.108-116
• /
• 2015

Hydrogen sulfide and ammonia are one of the common malodorous compounds that can be found in emissions from many sewages treatment plants and industrial plants. Therefore, removing these harmful gases from emissions is of significance in both life and industry because they can cause health problems to human and detrimental effects on the catalysts. In this work, pyrolytic carbon blacks from waste tires were used to develop adsorbent with good adsorption capacity for removal of hydrogen and ammonia. Pellet-type adsorbents were prepared by a mixture of carbon black, metal oxide and sodium hydroxide or hydrochloric acid, and their adsorption capacities were estimated by using breakthrough curve of a continuous fixed bed adsorption column at ambient condition. The adsorbent manufactured with a mixture of carbon black, iron oxide(III) and sodium hydroxide showed the maximum working capacity of hydrogen sulfide. For ammonia, maximum working capacity was obtained by the adsorbent manufactured with a mixture of carbon black, copper oxide(II) and hydrochloric acid.

• Journal of Adhesion and Interface
• /
• v.15 no.2
• /
• pp.49-56
• /
• 2014

In this study, properties of adhesion between adhesion promoter-containing rubber compound and zinc coated steel cord was investigated. Cobalt salt, resorcinol formaldehyde resin (RF resin) and hexamethoxymethylmelamine (HMMM) were used to adhesion promoter. Since cobalt salts accelerate sulphidation rate of zinc at zinc coated steel cord surface, pullout force of rubber compound applying cobalt salts was increased compared to that of rubber compound without applying cobalt salts. Pullout force and rubber coverage of rubber compounds applying all adhesion promoters were superior because strong interlocking between rubber matrix increased modulus due to applying RF resin and HMMM and grown zinc sulfides at zinc coated steel cord surface.

• Resources Recycling
• /
• v.31 no.2
• /
• pp.49-55
• /
• 2022

In the present study, the thermodynamic evaluation of the sulfate-roasting process was conducted to extract vanadium from the Korean vanadium titano-magnetite ore. The leaching efficiency of vanadium and other impurities was analyzed for varying roasting temperatures and addition of Na₂SO₄. In the case of sulfate roasting, the roasting temperature was 200 ℃ higher than that previously observed Na₂CO₃ roasting. However, the higher leaching efficiency of vanadium and lower leaching efficiency of other impurities, such as aluminum and silicon, were observed. The high selectivity for the extraction of vanadium in sulfate roasting would result from the reaction mechanism between SO₂ gas and vanadium concentrate.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.150-155
• /
• 1995

Mo 단결정 표면에 황을 흡착시켜 형성된 상층구조를 AES와 LEED로써 연구하였다. 황의 피복률은 sulfur gun으로부터 생성되는 S2 flux로써 조절하였으며, 여러 가지 흡착된 황의 상층구조를 LEED로써 관찰하였다. 황화된 Mo 표면에서 탈산소반응(HDO)의 모델 분자로서, Furan의 흡착과 반응을 승온반응분광법(TPRS)으로 조사하였다. 낮은 온도에서 Furan 분자의 헤테로 원자는 직접 이탈하여 안정한 기체상의 반응 생성물인 일산화탄소를 형성하였으며, 이 반응은 Mo의 (100) 및 (110)면에서 각각 깨끗한 표면 및 황화된 표면에 관계없이 일어났다. 이를 바탕으로 Mo 표면에서 Furan의 분해반응에 대한 메카니즘을 제안하였다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.279-280
• /
• 2003

지구상의 대기환경 중에 가스상의 형태로 존재하는 황화합물은 크게 두 가지 유형으로 분류된다. 인류의 산업활동과 같은 여러 유형의 인위적 배출원을 통해 배출되는 황화합물의 절대적인 부분을 차지하며 가스상 산화물의 형태로 존재하는 이산화황과 같은 성분은 인위적 기원의 황성분을 대표한다 (Spiro et al., 1992). 그런데 이들과 달리 자연적인 조건에서 생물활동의 결과로 지구의 대기환경 중으로 유입되는 황화합물들은 그 종류가 다양할 뿐 아니라, 산화도가 낮은 환원황화합물 (reduced sulfur compounds)의 형태로 존재한다. (Andreae, 1990). (중략)

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.219-222
• /
• 2003

폐광된 서보광산 주변의 주요 중금속 오염원으로는 폐광석과 과거에 선광을 하였던 시설 부근에 방치되어 있는 광미를 들 수 있다 과거 선광시설 주변에서 채취한 광미에는 황화광물이 다량으로 함유되어 있어 계속 방치되어 있을 경우에는 장마 기간동안 유실되어 하천 퇴적물을 크게 오염시키는 원인이 될 수 있다. 또한, 이 광미에 다량으로 함유되어 있는 황화광물이 산화작용을 받을 경우, 용해된 중금속 원소가 주변 토양 혹은 하천퇴적물 오염의 원인이 될 수 있다. (중략)

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.05a
• /
• pp.33-38
• /
• 1999

CCT(Clean Coal Technology)의 응용분야인 IGCC, PFBC 및 MCFC 등 석탄을 이용한 새로운 발전기술에 활용될 것으로 예견되는 고온건식 탈황기술은 고온(35$0^{\circ}C$~$650^{\circ}C$)과 고압(약 20기압)상태에서 금속 산화물로 된 고체흡수제(고온건식 탈황제)를 이용하여 반응기(유동층, 고속유동층 및 고정층과 이동층 반응기 등)에서 흡수와 재생반응을 통하여 석탄가스중에 있는 H$_2$S 등 황화물을 효율적으로 제거하는 기술이다.(중략)