• Resources Recycling
• /
• v.11 no.4
• /
• pp.44-50
• /
• 2002

Characteristics on the sulfuric acid leaching of zinc and manganese from the spent zinc-carbon battery powders obtained by cushing and magnetic separation, were investigated with the variation of sulfuric acid concentration, reaction temperature, stir-ring speed and solid/liquid ratio. The sample powders were composed of Zn metal, ZnO, $MnO_2$ and $Mn_2$$O_3$. and it was found that the selective leaching of zinc was difficult in this system. At the condition of S/L ratio 1:10, IM H$_2$$SO_4$, $60^{\circ}C$ and 200 rpm, leaching rate of Zn and Mn are 92% and 35% respectively. The concentration of Zn and Mn in the leaching solution are 19.5 g/l, 7.8 g/l and pH of that solution is 0.75. It was confirmed at reducing agent should be added to increase e leaching rate of manganese with sulfuric acid.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.3
• /
• pp.169-176
• /
• 2004

The Mechanistic model, considering expansion stress, coefficient of diffusion etc. to time, is applied to predict the deterioration of concrete structures of the nuclear power plant(NPP) due to sulfate attack. Mix design for the test was three kinds of specified compressive strength 385, 280 and $210kgf/cm^2$ which are used to construct NPPs and cement was type I and V. The immersion test was performed with 10% $Na_2SO_4$ solution to cement type and strength for a year. The coefficient of diffusion on each concrete mix is calculated based on the results of immersion test, and it is used for predicting the sulfate attack of the concrete structures of NPP. The coefficient of diffusion of the target concrete ranged $0.5763{\sim}3.9002{\times}10^{-12}m^2/sec.$, and the sulfate attack rate of concrete structures of the NPP was predicted as 0.1~7.1 mm/year.

• Resources Recycling
• /
• v.15 no.6 s.74
• /
• pp.16-24
• /
• 2006

In this study, the neutralization and dechlorination process of MWI(Municipal Waste Incinerator) fly ash with $H_2SO_4$ are investigated to recover HCI, which is delivered from the reaction of chloride in the ash and sulfuric acid. The coarse crystalline gypsum and fine impurity containing heavy metal are also separated by 500# wet screening followed by recrystallization of the dechlorinated ash mainly made of $CaSO_4$. As a results, Using 100g MWI fly ash and 85g cone. sulfuric acid as raw material, 52.6g hydrochloric acid with 35% assay and 116.9g crystalline gypsum with 98% or more assay are recovered. In this process, 7.85g fine impurity containing heavy metal and 2.65g coarse impurity are also separated.

• Resources Recycling
• /
• v.12 no.5
• /
• pp.10-15
• /
• 2003

In this study, the separation of rare earths and aluminium from the dried powder of waste cerium polishing slurry was investigated. Since cerium oxide, 40％ of rare earths, is the most stable state in rare earth, the dissolution of cerium oxide in acid solution is not easy. Therefore the dissolution process of cerium oxide by sulfation was examined in order to increase the recovery of rare earth. The rare earths could be separated from aluminum by double salt precipitation using sodium sulfate.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2011.10a
• /
• pp.44-44
• /
• 2011

디젤 엔진 배기가스 중의 황산화물(SOx)은 산성비의 원인이 될 뿐 아니라 인체에 대해서도 상당히 치명적인 위험을 초래하는 성분으로 지금까지는 다른 오염물질인 질소산화물 (NOx), 입자상 물질(particulate matter) 등에 비해서 상대적으로 덜 주목을 받아왔다. 국제적인 황산화물 배출규제의 경우, '황산화물 배출규제지역' (SECA : SOx Emission Control Area)에 대해 엄격한 배출규제가 시행되고 있는데, 대부분 황함량을 1.5%이하의 연료를 사용하거나, 후처리 설비를 설치해서 배기가스 중의 황산화물을 6.0g/kWh 이하로 유지하도록 규정하고 있다. 따라서 본 연구에서는 강화되고 있는 디젤엔진 배기가스 중의 황산화물과 입자상 물질을 저감하기 위한 설비로서, 높은 경제성 및 신뢰성 등의 장점으로 인해 선정 가능성이 가장 높은 스크러버 시스템에 대해 독자모델 설계를 수행하였으며 파일롯 설비를 활용한 실제 디젤엔진에 대한 실험을 통하여 운전조건에 따른 제거효율, 발생되는 처리수의 성분, 그리고 디젤엔진 운전에 영향을 미치는 압력손실 등에 대한 데이터를 확보함으로써 실제 선박적용에 대한 가능성을 확인하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.485-488
• /
• 2008

Recycled fine aggregate has low quality because it contains large amount of old mortar. So, its usage is limited to a lower value-add, such as the roadbed material etc. Also, alkaline water occurred from treatment process of the waste concrete is becoming the cause of environmental problem. Accordingly, this study is to develop on the high quality recycled fine aggregate produced by low speed wet abraser using sulphuric. We investigated the properties of compressive strength of the mortar which was manufactured using recycled fine aggregate containing calcined gypsum produced by earlier mentioned process. Test results indicate that mortar using recycled fine aggregate containing calcined gypsum has lowest compressive strength. It seems that low compressive strength is closely associated with the expansion of the specimen by excessive formation of ettringite.

• Applied Biological Chemistry
• /
• v.16 no.3
• /
• pp.146-165
• /
• 1973

Crop damages caused by sulfur dioxide poisoning were studied with respect to physiology of lesion, yield loss and prevention measures. The results are summarized as follows; 1. On the physiology of injury: The sulfur dioxide gas did no: affect the pH and $E_h$ values of the tested leaf juice of plants. Peroxidase activity was inhibited just after sulfur dioxide treatment but gradually recovered to normal after 10 hours. Methanolic chlorophyll solution was instantaneously and irreversibly bleached by the addition of sulfur dioxide gas with no evidence of pheophytin formation. It seems that chlorophyll forms colourless addition product or is reduced to colourless form with either sulfur dioxide gas or sulfurous acid. Chlorophyll in the chloroplast was also bleached by the sulfur dioxide treatment, as in the case of methanolic solution of chlorophyll, except that the rate of bleaching was rather slow, requiring 1-2 hours. It appears that the most inflicting cause of sulfur dioxide gas to plants may be the destruction of chlorophyll by the poisoning gas. 2. On the effects to crop yield: The crop yield losses were proportional to the concentration of inflicting sulfur dioxide gas. The order of tolerence of the crops to the sulfur dioxide gas was as follows - chinese cabbage being the most susceptible; wheat, paddy rice, barley, soybean, welsh onion, radish and chinese cabbage. The crucifer crops were generally found more susceptible than other crops studied. With respect to the growing stages of crops exposed to sulfur dioxide gas, it was found that the flowering stage was the most susceptible fellowed by panicle forming, milky and tillering in the decreasing order of susceptibility. 3. On the preventive measures of yield losses: Soil applications of potassium, wollastonite, lime or spray of lime water were effective to prevent yield losses from sulfur dioxide fumigation of paddy rice, barley, and soybeans. The most responsive treatment was lime water spray for all crops tested. In case of sulfur dioxide fumigated paddy rice, the lime water spray also increased carbon assimilation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.3
• /
• pp.423-427
• /
• 1997

The effect of different treatments on the quality and yield of purified agar produced from Gelidium amansii has been studied, and the extraction condition ol agar produced from G. amansii has been examined. The contents of ash, sulfate in agar produced from g. amansii collected from different places were $2.63\~2.92\%\;and\;1.38\~1.78\%$, respectively. Yields and gel strength of agar produced from G. amansii collected from different places were $31.6\~46.8\%\;and\;496\~887g/cm^2$, respectively. It was effective to extract agar at $120^{\circ}C\;for\;2\~3hrs$. Agar was purified by D.W. washing, EDTA washing, chitosan treatment, CPC treatment, PEG treatment, ethanol precipitation, acetone precipitation and propanol precipitation. The mineral contents of agar produced from Gelidium amansii were Na (2934ppm), Ca (2472ppm), Mg (2259ppm), K (2527ppm), P1(81.1ppm), Fe (66.4ppm), Al (71.7ppm), Zn (29.7ppm) and Pb (ND: not detected), respectively.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.527-537
• /
• 2018

Column tests of a sulfate reducing bacteria (SRB) bioreactor were conducted to determine the design factors for sulfate-rich mine drainage. Various substrates were applied to the bioreactor, including cow manure and its mixture with a mushroom compost, with rice straw and limestone as subsidiary materials. This procedure provided a removal efficiency of up to 82% of the total sulfur with the mixture of cow manure (70%), mushroom compost (10%) and rice straw (20%), and higher efficiencies were observed after 2 days of retention time. In the downflow condition of the flow direction, oxygen supply and re-oxidation of the sulfates occurred, causing a decrease in sulfate removal efficiency. The addition of an inorganic sludge containing heavy metals, which was intended for production of metal-sulfides in the bioreactor, had a negative effect on the long-term operation owing to arsenic release and toxicity to the SRB. The results thus show that a bioreactor using a mixed substrate with cow manure and operating in the downflow direction could reduce sulfates and total dissolved sulfur content; this process confirms the applicability of the SRB bioreactor to sulfate-rich saline drainage.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.114-119
• /
• 2016

In this study, we tried to add the conductivity to natural polymer like bacterial cellulose (BC) coated with the conductive polymer PEDOT:PEG, graphene and silver nano-wire (AgNW). Sulfuric acid of 10 to 20% was previously mixed with PEDOT:PEG and then the solution was electron spin-coated on the BC membrane. And then, additive coating with graphene and AgNW were done to improve conductivity, which was examined by hall effect. As the result, we confirmed a considerable improvement of conductivity compared to BC-coated film without sulfuric acid treatment as $2.487{\times}10^{10}$ vs $8.093{\times}10^{15}$ ($1/cm^3$), showing higher electron density with $3.25{\times}10^5$ times. Also, we identified that changed particle type to the polymer type by sulfuric acid using SEM analysis. For FT-IR analysis, it was confirmed that S-O radical ($1200cm^{-1}$) increased in the sulfuric acid treatment than non-treated sulfuric acid. As the method used very small amount of PEDOT:PEG, its transparency could be kept, and pre-treatment process of sulfuric acid will be able to simplify the production process.