• Journal of Environmental Impact Assessment
• /
• v.26 no.6
• /
• pp.553-562
• /
• 2017

In these days, agricultural reservoirs are considered as a useful resource for recreational purposes, tour and cultural amenity for vicinity communities as well as irrigation water supply. However, many of the agricultural reservoirs are showing a eutrophic or hyper-eutrophic state and high level of organic contamination. In particular, about 44.7% of the aged agricultural reservoirs that constructed before 1945 exceed the water quality criteria for irrigational water use. In addition to external loading, internal nutrient loading from bottom sediment may play an important role in the nutrient budget of the aged reservoirs. The objectives of this study were to characterize variations of thermal structure of a shallow M reservoir (mean depth 1.7 m) and examine the potential of internal nutrient loading by continuous monitoring of vertical water temperature and dissolved oxygen (DO) concentration profiles in 2015 and 2016. The effect of internal loading on the total loading of the reservoir was evaluated by mass balance analysis. Results showed that a weak thermal stratification and a strong DO stratification were developed in the shallow M Reservoir. And, dynamic temporal variation in DO was observed at the bottom of the reservoir. Persistent hypoxic conditions (DO concentrations less than 2 mg/L) were established for 87 days and 98 days in 2015 and 2016, respectively, during the no-rainy summer periods. The DO concentrations intermittently increased during several events of atmospheric temperature drop and rainfall. According to the mass balance analysis, the amount of internal $PO_4-P$ loading from sediment to the overlying water were 37.9% and 39.7% of total loading during no-rainy season in 2015 and 2016, respectively on August when algae growth is enhanced with increasing water temperature. Consequently, supply of DO to the lower layer of the reservoir could be effective countermeasure to reduce nutrient release under the condition of persistent DO depletion in the bottom of the reservoir.

• Applied Microscopy
• /
• v.39 no.1
• /
• pp.57-64
• /
• 2009

The trapping leaves of Drosera capture insects by secreting sticky mucilage from numerous glandular trichomes (GTs) that are developed on the leaf epidermis. The present study examines and compares the structural features of those trichomes in Drosera binata and D. pygmy with the use of light and electron microscopy. The study focuses primarily on the development and differentiation pattern of the GTs during growth. Upon examination, the upper and lower epidermis were readily distinguishable by the features of GTs in developing leaves. In particular, the GTs were dense in the upper epidermis and along the leaf margin. In D. binata, the capitate GTs with elongated stalk and sessile peltate GTs were found most commonly, whereas only capitate GTs with varying degrees of the stalk length were observed in D. pygmy. Up to ca. $2.2{\sim}3.4\;mm$ long capitate GTs were seen in the leaf margins of D. binata and ca. $3.7{\sim}4.2\;mm$ long GTs having racket-like head with adaxial hemispheric structures, otherwise known as tentacles, were noted in the leaf margin of D. pygmy. The peltate GTs were found to be distributed in the lower epidermis of D. binata. In both species, head cells were dense with cytoplasm containing high numbers of Golgi bodies, ER, mitochondria and small vesicles. Secretory materials accumulated within numerous small vacuoles, then fused together to form a single large vacuole, which serves as a secretory cavity. Flection movement of the marginal GTs and leaf blade GTs, and increased mucilage secretion from the head cells upon contact with prey during the capturing process are considered to be major factors in their active insectivorous mechanism. The findings of this study will be useful in comparisons to similar findings in other species that form adhesive trapping leaves, such as Drosophyllum or Pinguicula., further contributing a better understanding of the function and structure of the trapping leaves of carnivorous plants.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.189-195
• /
• 2015

To determine the contents of sodium (Na) and potassium (K) for restaurant dishes, 194 cases classified 26 kinds of restaurant dishes were collected from restaurants in Seoul and were analysed using the atomic absorption spectroscopy. Average contents of Na and K in Kimchi among restaurant dishes were highest as $554.9{\pm}155.5mg/100g$, $225.1{\pm}69.1mg/100g$, while average contents of Na and K were lowest in Seolleongtang as $24.2{\pm}5.8mg/100g$, $12.7{\pm}3.9mg/100g$ respectively. The contents between Na and K in restaurant dishes had a strong correlation of positive linear judging from 0.782 (p-value < 0.01) of the correlation coefficient. The Na/K ratio of Bulgogi was appropriate as $1.17{\pm}0.44$, while those of Udon, banquet noodles, Kalguksu were very high as shown more than 10. The contents of Na and K were examined 5 dish groups as Gook/Tang, Jjigae/Jeongol, stir-fried dish, noodle and Kimchi. Average contents of Na and K classified by dish groups were significantly difference (p-value < 0.001). Average content of Na among dish groups was highest in Kimchi as $554.9{\pm}155.5mg/100g$ followed by Jjigae/Jeongol, Gook/Tang, stir-fried dish and noodle. Similar to Na content, average content of K was highest in Kimchi as $225.1{\pm}69.1mg/100g$ followed by stir-fried dish, Jjigae/Jeongol, Gook/Tang and noodle. The ratio of Na/K by classified groups of dishes was shown as significantly difference (p-value < 0.001). Stir-fried dish was $1.18{\pm}0.44$ close to 1 followed by Kimchi, Jjigae/Jeongol, Gook/Tang, and noodle.

• Journal of Food Hygiene and Safety
• /
• v.30 no.2
• /
• pp.132-142
• /
• 2015

The purpose of this study was to investigate the perception and information needs about food additives from the parents of elementary school children, and to develop a smartphone application (App) providing information about food additives, and finally to assess its educational effects. A survey was conducted in April 2013 by using a self-administered questionnaire, and total 358 responses were collected from the parents living in Seoul and Gyeonggi province. While purchasing processed foods, parents considered safety (40.5%) as the most important factor, and first checking item except production and expiration dates was origin labelling (35.4%), and chose foods with less food additives (63.1%). Parents recognized food additives as the most dangerous (42.7%), and 75.1% responded the level of danger as 'very dangerous'. However, 82.4% of parents didn't have experiences to get educations about food additives. Based on their information needs including the safety, legal standards and the foods containing food additives. a smartphone App designated as 'Catch up Food Additives' consisting of the definition, safety, food labelling guideline, management, animation about food additives was developed. When the App was exposed to the parents (n = 27), their negative perceptions on food additives were improved significantly. These results showed that providing information and education about food additives using smartphone App was very fast and effective for the promotion of risk communication on food additives with the parents.

• Journal of Food Hygiene and Safety
• /
• v.27 no.1
• /
• pp.68-73
• /
• 2012

In this study, a method was developed using molecular biological technique to distinguish an authenticity of meats for processed meat products. The genes for distinction of species about meats targeted at 12S or 16S genes in mitochondrial DNA and the species-specific primers were designed by that PCR products' size was around 200bp for applying to processed products. The target materials were 10 species of livestock products and it checked whether expected PCR products were created or not by electrophoresis after PCR using species-specific primers. The results of PCR for beef, pork, goat meat, mutton, venison, and horse meat were 131, 138, 168, 144, 191, and 142 bp each. The expected PCR products were confirmed at 281, 186, 174, and 238 bp for chicken, duck, turkeymeat, and ostrich. Also, non-specific PCR products were not detected in similar species by species-specific primers. The method using primers developed in this study confirm to be applicable for composite seasoning including beefs and processed meat products including pork and chicken. Therefore, this method may apply to distinguish an authenticity of meats for various processed products.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.381-388
• /
• 2017

In this study, we investigated the levels of natural preservatives of benzoic acid, sorbic acid, and propionic acid in spices. The quantitative analysis was performed using high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) for benzoic acid and sorbic acid and gas chromatography-mass spectrometry (GC-MS) for propionic acid. The sample was extracted with ethanol using sonication, then centrifuged and evaporated to dryness and redissolved to 1 mL with ethanol to use for the instrumental analysis. The analytical method was validated based on linearity, recovery, limit of detection (LOD), and limit of quantification (LOQ). This method was suitable to determine low amounts of naturally occurring preservatives (benzoic acid, sorbic acid, and propionic acid) in various spices. Benzoic acid, sorbic acid, and propionic acid were found in 165 samples, 88 samples, and 398 samples, respectively from the total of 493 samples. The concentration of benzoic acid, sorbic acid, and propionic acid were ranged at ND-391.99 mg/L, ND-57.70 mg/L, and ND-188.21 mg/L in spices, respectively. The highest mean levels of benzoic acid, sorbic acid, and propionic acid were found in cinnamon (167.15 mg/L), basil leaves (22.79 mg/L), and white pepper (51.48 mg/L), respectively. The results in this study provide ranges of concentration regarding naturally occurring benzoic acid, sorbic acid, and propionic acid in spices. Moreover, the results may use to the case of consumer complaint or trade friction due to the inspection services of standard criteria for the preservatives of spices.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.371-380
• /
• 2017

In this study, 17 kinds of polyphenols and 5 kinds of anthocyanins were analyzed to compare the contents of polyphenols and anthocyanins in 76 colored agricultural products. A total of 17 polyphenols were analyzed simultaneously by 9 phenolic acids (gallic acid, protocatechuic acid, chlorogenic acid, vanillic acid, caffeic acid, syringic acid, p-coumaric acid, t-ferulic acid, t-cinnamic acid) and 8 flavonoids ((+)catechin, syringic aldehyde, rutin, epicatechin gallate, naringin, luteolin, naringenin, kaempferol) and 5 anthocyanins (delphinidin-3-glucoside, delphinidin-3-rutinoside, cyanidin-3-galactoside, cyanidin-3-glucoside, cyanidin-3-arabinoside) were simultaneously analyzed. The total content of 17 polyphenols was determined as seoritae $255.1{\pm}7.5{\mu}g/g$, seomoktae $275.8{\pm}5.3{\mu}g/g$, black rice $78.5{\pm}4.6{\mu}g/g$, black sesame $75.8{\pm}3.2{\mu}g/g$, blueberry $143.3{\pm}5.5{\mu}g/g$, aronia $195.2{\pm}4.9{\mu}g/g$ and blackcurrent $131.6{\pm}3.2{\mu}g/g$, the highest content was found in the order of seomoktae > seoritae > aronia > blueberry > blackcurrant > black rice > black sesame. The total content of 5 anthocyanins was determined as seoritae $82.4{\pm}17.2{\mu}g/g$, seomoktae $95.2{\pm}6.1{\mu}g/g$, black rice $74.1{\pm}9.7{\mu}g/g$, black sesame were not detected, blueberry $110.8{\pm}1.9{\mu}g/g$, aronia $218.9{\pm}6.1{\mu}g/g$ and blackcurrent $209.7{\pm}4.0{\mu}g/g$, the highest content was found in the order of aronia > blackcurrant > blueberry > seomoktae > seoritae > black rice. These results indicated that seomoktae and aronia possessed the high level of functional components and further study will be needed to develop high value-added foods based on the colored agricultural products.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.424-433
• /
• 2017

Antioxidants are used in the manufacturing of commercial food packages made of polyolefin plastic such as polyethylene and polypropylene for the purpose to delay the oxidation reaction of the polymer due to oxygen or traces of ozone in the atmosphere. Additives in plastics may be migrated from the packaging materials into foods, thereby presenting a potential health risk to the consumer. Therefore, it is necessary to determine migration level of antioxidants from food packaging materials to foodstuffs in order to take proactive management. In this study, we have developed a method for the analysis of 10 antioxidants, which are butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT), Cyanox 2246, 425 and 1790, Irgafos 168, and Irganox 1010, 1330, 3114 and 1076, migrated from the food packaging materials into four food simulants for aqueous, acidic, alcoholic and fatty foods. The antioxidants were determined by reversed-phase high-performance liquid chromatograph-ultraviolet detector with 276 nm after solid-phase extraction with a hydrophilic-lipophilic balance (HLB) cartridge or dilution with isopropanol. The analytical method showed a good linearity of coefficient ($R^2{\geq}0.99$), limits of detection (0.11~0.41 mg/L), and limits of quantification (0.34~1.24 mg/L). The recoveries of antioxidants spiked to four food simulants ranged from 71.3% to 109.4%. The migrated antioxidants in this study were within the safety levels that resulted from the safety assessment by the estimated daily intake to the tolerable daily intake.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.434-442
• /
• 2017

The UV light in sunlight breaks down the chemical bonds in a polyolefin polymer through a process called photodegradation, ultimately causing cracking, chalking, colour changes, and loss of physical properties such as impact strength, tensile strength, elongation, and others. UV absorbers are used to prevent or terminate the oxidation of plastics by UV light. They are receptive to UV radiation and dissipate the energy harmlessly as heat. Benzotriazoles and benzophenones are used mainly in polyolefins such as polyethylene and polypropylene. In this study, we have developed a method for the analysis of 12 UV absorbers, which are Uvinul 3000, Cyasorb UV 24, Uvinul 3040, Tinuvin 312 and P, Seesorb 202, Chimassorb 81, Tinuvin 329, 234, 326, 328 and 327, migrated from the food packaging materials into four food simulants for aqueous, acidic, alcoholic and fatty foods. The UV absorbers in food simulants were determined by reversed-phase high performance liquid chromatograph-ultraviolet detector with 310 nm after solid-phase extraction with a hydrophilic-lipophilic balance (HLB) cartridge or dilution with isopropanol. The analytical method showed a good linearity of coefficient ($R^2{\geq}0.99$), limits of detection (0.049~0.370 mg/L), and limits of quantification (0.149~1.120 mg/L). The recoveries of UV absorbers spiked to four food simulants ranged from 70.05% to 110.13%. The developed method would be used as a reliable tool to determine concentrations of the migrated UV absorbers.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.348-354
• /
• 2017

Internationally different food safety regulation and standards could cause troubles in trade unless those are built on scientific knowledge. In this research, we monitored the microbial population and analyzed the results to determine the level of microbial contamination in foodstuffs using relatively new statistical analysis (microbiological sampling plan, International Commission on Microbiological Specification for Foods). The goal of this research falls on establishing entirely new standards for various food categories addressed in the Korean "Food Code". Targets for monitoring were indicator organisms (i.e. total aerobic count, coliform and Escherichia coli) and foodborne pathogens (i.e. Bacillus cereus, Staphylococcus aureus and Clostridium perfringens) in ready-to-eat (RTE) products. As the result of the monitoring, total aerobic count, coliform, E. coli, and B. cereus in RTE products were found at the mean values of 2.10 log CFU/g, -0.60 log CFU/g, -1.33 log CFU/g and -1.23 log CFU/g, respectively. S. aureus was detected with the level of -1.35 log CFU/g only in fresh-cut food, while C. perfringens was -1.37 log CFU/g only in ready-to-cook food. Other samples did not have any food borne pathogens. Total aerobic count, B. cereus, S. aureus and C. perfringens satisfied the Food Code (the MFDS). On the basis of the analysis, we proposed a draft of microbial criteria for RTE products.