• Journal of Environmental Impact Assessment
• /
• v.26 no.2
• /
• pp.127-139
• /
• 2017

Measurements of net ecosystem exchange (NEE) of $CO_2$ based on the eddy covariance technique provide reasonable carbon balance estimates in response to local environmental conditions. In South Korea, the forest ecosystems cover approximately 64% of the total area, thereby strongly affecting regional carbon balances. Cultivated croplands that cover about 17% of the total area should also be considered when calculating the carbon balance of the country. In this study, our objectives were (a) to quantify the range and seasonal variation of NEE at forest ecosystems, including deciduous, coniferous, and mixed forests, and agricultural ecosystems, including rice paddies and a potato field, in South Korea and (b) to compare NEE at ten Fluxnet sites that have the same or similar ecosystems as found in South Korea. The results showed that the forest and agricultural ecosystems were carbon sinks. In Korea, NEE at the forest ecosystems varied between -31 and $-362gC/m^2/yr$, and NEE at the croplands ranged from -210 to $-248gC/m^2/growing$ season. At the deciduous forest, NEE reached low values in late spring, early summer, and early autumn, while at the coniferous forest, it reached low values in spring, early summer, and mid autumn. The young mixed forest was a much stronger carbon sink than the old-growth deciduous and coniferous forests. During each crop growing season, beet had the lowest NEE value within six crops, followed by wither wheat, maize, rice, potato, and soybean. These results will be useful for designing and applying management strategies for the reduction of $CO_2$ emissions.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.3
• /
• pp.311-316
• /
• 2007

In this study, we investigated the presence of nitrogen, phosphorus, ions, heavy metals and other contaminations in the water stream and soil of the forest watershed with different geology and vegetations for one year from October 2004 to September 2005. Most of the nitrogen oxide in the soil was in the form of $NO_3^-$, and it appeared that nitrogen contents decreased as the soil depth increased. Nitrogen contents was highest in the basalt area showing 13.3 mg/g in the surface soil and 7.40 mg/g in the subsoil. Phosphorous contents showed no significant variations depending on the soil depth and was higher in the intermediate soil layer(60 cm) than in surface soil (30 cm) in granite and metamorphic rock areas. Nitrogenous compound in the soil water was 8.03 mg/L in the granite area of coniferous forest and 14.79 mg/L in the andesite area of the deciduous forest. Nitrogenous compound in the stream water was 5.53 mg/L in October and 6.99 mg/L in January in the granite area of the coniferous forest and $3.61\sim5.11$ mg/L in the andesite area of the deciduous forest. Phosphates in runoff and stream water were similar in coniferous with in deciduous forests, showing a slight increase(0.090$\sim$0.179 mg/L) in the basalt area. In the coniferous forest, pH showed a significant positive correlation with EC, $Ca^{2+}$ and $Cl^-$ at p < 0.01, and showed a negative correlation with S-Fe and S-Al. Electroconductivity showed a significant correlation of 0.601 with $Ca^{2+}$ and of -0.586 with $NO_3^-$ at p<0.01, and showed a significant correlation of 0.301 with $SO_4^{2-}$ and of -0.295 with S-Fe at p < 0.05. In the deciduous forest, pH showed a positive correlation with $Ca^{2+}$ at p < 0.05, and showed a negative correlation with $K^+$, S-Fe and S-Al at p < 0.01. Electroconductivity showed a significant positive correlation with $Ca^{2+}$ and $Cl^-$ at p < 0.05 and with $NO_3^-$ at p < 0.01.

• Journal of Korean Society of Forest Science
• /
• v.90 no.2
• /
• pp.197-209
• /
• 2001

TOPMODEL, semi-distributed hydrological model, is frequently applied to predict the amount of discharge, main flow pathways and water quality in a forested catchment, especially in a spatial dimension. TOPMODEL is a kind of conceptual model, not physical one. The main concept of TOPMODEL is constituted by the topographic index and soil transmissivity. Two components can be used for predicting the surface and subsurface contributing area. This study is conducted for the validation of applicability of TOPMODEL at small forested catchments in Korea. The experimental area is located at Gwangneung forest operated by Korea Forest Research Institute, Gyeonggi-do near Seoul metropolitan. Two study catchments in this area have been working since 1979 ; one is the natural mature deciduous forest(22.0 ha) about 80 years old and the other is the planted young coniferous forest(13.6 ha) about 22 years old. The data collected during the two events in July 1995 and June 2000 at the mature deciduous forest and the three events in July 1995 and 1999, August 2000 at the young coniferous forest were used as the observed data set, respectively. The topographic index was calculated using $10m{\times}10m$ resolution raster digital elevation map(DEM). The distribution of the topographic index ranged from 2.6 to 11.1 at the deciduous and 2.7 to 16.0 at the coniferous catchment. The result of the optimization using the forecasting efficiency as the objective function showed that the model parameter, m and the mean catchment value of surface saturated transmissivity, $lnT_0$ had a high sensitivity. The values of the optimized parameters for m and InT_0 were 0.034 and 0.038; 8.672 and 9.475 at the deciduous and 0.031, 0.032 and 0.033; 5.969, 7.129 and 7.575 at the coniferous catchment, respectively. The forecasting efficiencies resulted from the simulation using the optimized parameter were comparatively high ; 0.958 and 0.909 at the deciduous and 0.825, 0.922 and 0.961 at the coniferous catchment. The observed and simulated hyeto-hydrograph shoed that the time of lag to peak coincided well. Though the total runoff and peakflow of some events showed a discrepancy between the observed and simulated output, TOPMODEL could overall predict a hydrologic output at the estimation error less than 10 %. Therefore, TOPMODEL is useful tool for the prediction of runoff at an ungaged forested catchment in Korea.

• Journal of Korean Society of Forest Science
• /
• v.87 no.1
• /
• pp.90-97
• /
• 1998

This study was carried out to compare the characteristics of relative conductivity(RC) in the twenty-one deciduous broad-leaved species. The results obtained were summarized as follows : 1. The RC ranged from $3.18{\times}10^{-15}$ to $1.23{\times}10^{-10}m^2$ in deciduous broad-leaved species, and appeared different values in various portions of a tree and species. 2. In eight diffuse-porous species, the ranges of average RC were $3.49{\times}10^{-13}$ to $6.35{\times}10^{-11}m^2$ in stems. $4.89{\times}10^{-13}$ to $2.99{\times}10^{-11}m^2$ in branches, and $1.33{\times}10^{-13}$ to $9.42{\times}10^{-12}m^2$ in junction part between stem and branch. In thirteen ring-porous species, the RCs were $7.14{\times}10^{-13}$ to $4.76{\times}10^{-11}m^2$ in stems, $2.93{\times}10^{-13}$ to $3.91{\times}10^{-11}m^2$ in branches, and $1.14{\times}10^{-13}$ to $9.20{\times}10^{-12}m^2$ in junction part. 3. The RC and diameter of stem have no interrelation in eight diffuse-porous species. The RC of stem increased with decreasing diameter of stem in eleven ring-porous species except Fraxinus mandshurica and Maackia amurensis. 4. In five deciduous broad-leaved species, the RC of 1-year-old shoots(the leader and adjacent laterals ) ranged from $4.87{\times}10^{-13}$ to $8.41{\times}10^{-11}m^2$ in the leaders, and $7.93{\times}10^{-14}$ to $2.01{\times}10^{-11}m^2$ in the adjacent laterals. The RCs were much greater in the leaders than in the adjacent laterals because of the hydraulic dominance of the leader shoot.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.431-438
• /
• 2014

This study was conducted to assess forest biomass resource which is a carbon sink and a renewable resource in Korea. The total forest biomass resource potential was 804 million tons, and conifers, broadleaved forest and mixed forest accounted for 265 million tons, 282 million tons, and 257 million tons, respectively. Proportionately to regional forest stocks, biomass potential of Gangwon-do had most biomass potential, followed by Gyeongsangbuk-do and Gyeongsangnam-do. The woody biomass from the byproduct of sawn timber in commercial harvesting was 707 thousand ton/year, and that from the byproduct of forest tending was 592 thousand ton/year. The amount resulted in about 1,300 thousand ton/year of potential supplies from forest biomass resource into the energy market. It's tonnage of oil equivalent(toe) was 585 thousand ton/year. In this study, we developed a program (BiomassMap V2.0) for forest biomass resource mapping. Used system to develop this program was Microsoft Office Excel, Microsoft Office Access ArcGIS and Microsoft Visual Basic 6.0. Additionally, This program made use of tool such as ESRI MapObjects2.1 in order to take advantage of spatial information. This program shows the map of total biomass stock, annual biomass growth at forest land in Korea, and biomass production from forest tending and commercial harvesting. The information can also be managed by the program. The biomass resource map can be identified by regional and forest type for the purpose of utilization. So, we expect the map and program to be very useful for forest managers in the near future.

• Journal of Korean Society of Forest Science
• /
• v.106 no.3
• /
• pp.310-319
• /
• 2017

This study categorized the damaged trees by Supervised Classification using time-series-aerial photographs of Bukhan, Cheonggae and Suri mountains because oak wilt disease seemed to be concentrated in the metropolitan regions. In order to analyze the spatial characteristics of the damaged areas, the geographical characteristics such as elevation and slope were statistically analyzed to confirm their strong correlation. Based on the results from the statistical analysis of Moran's I, we have retrieved the following: (i) the value of Moran's I in Bukhan mountain is estimated to be 0.25, 0.32, and 0.24 in 2009, 2010 and 2012, respectively. (ii) the value of Moran's I in Cheonggye mountain estimated to be 0.26, 0.32 and 0.22 in 2010, 2012 and 2014, respectively and (iii) the value of Moran's I in Suri mountain estimated to be 0.42 and 0.42 in 2012 and 2014. respectively. These numbers suggest that the damaged trees are distributed in clusters. In addition, we conducted hotspot analysis to identify how the damaged tree clusters shift over time and we were able to verify that hotspots move in time series. According to our research outcome from the analysis of the entire hotspot areas (z-score>1.65), there were 80 percent probability of oak wilt disease occurring in the broadleaf or mixed-stand forests with elevation of 200~400 m and slope of 20~40 degrees. This result indicates that oak wilt disease hotspots can occur or shift into areas with the above geographical features or forest conditions. Therefore, this research outcome can be used as a basic resource when predicting the oak wilt disease spread-patterns, and it can also prevent disease and insect pest related harms to assist the policy makers to better implement the necessary solutions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.13 no.1
• /
• pp.13-19
• /
• 1980

1. Ginseng field and virgin soils, to which Yakto, washed Yakto, litters (deciduous and coniferous trees) and bone meal were applied, were incubated at 60% of field capacity of the soils to shed light on the production of $NH_4-N$ and $NO_3-N$ through mineralization of the organic materials being the nitrogen sources for Korean ginseng. 2. Total nitrogen content mineralized in the soils, to which the following organic materials were applied, was:bone meal>Yakto${\gg}$litter (deciduous trees)> washed Yakto, litter (coniferous trees). The content increased with incubation time in all the virgin and ginseng field soils excepting only the virgin soils applied with washed Yakto and litters of which the contents decreased. A large part of nitrogen mineralized in the virgin and ginseng field soils to which Yakto was applied was nitrate form, while a half ginseng field soils and a considerable part in the other virgin soils was ammonium form in the other treatments. 3. $NH_4-N$ content produced in the virgin and ginseng field soils applied with bone meal increased with the time, while it decreased in the other treatments. And the content in the soils applied with bone meal was very high. 4. $NO_3-N$ content showed a continuous increase during the incubation time in all treatments of ginseng field soils and only in the virgin soil to which Yakto was applied, wherease it showed almost no change in the other treatments of virgin soils. And the content in the soils applied with Yakto was very high. 5. Yakto was expected to supply nitrate enough to meet amounts of nitrogen required by ginseng with different ages and also expected to increase in soil fertility, while bone meal was expected only to supply much nitrogen of which a considerable part was ammonium form.

• The Korean Journal of Mycology
• /
• v.27 no.1 s.88
• /
• pp.10-14
• /
• 1999

A single phase composter was constructed by modifying the conventional mixer of sawdust for the cultivation of oyster mushroom Pleurotus ostreatus. The machine was designed on the basis of 3-phase-1 system which was controlled in prewetting, pasteurization and fermentation processes. In composting 200 kg of straw and cotton waste in the machine, it took 20 minutes in prewetting step and also to hours at $65^{\circ}C$ in pasteurization process. Postfermentation by aerothermophiles was completed by treating the compost at $45^{\circ}C-50^{\circ}C$ for 48 hours which was shorten 24 hours from the conventional method. In the postfermentation at high temperature, forced aeration and/or vigorous mixing process(es) played a great role in the improvement of spawn quality. The growth of mycelium of oyster mushroom was excellent in the culture combinated with 3 parts of surface inoculation and 7 parts of mechanical mixing.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.559-571
• /
• 2017

This study was conducted to determine the adhesive performances of plywoods affected by layering direction and the amounts of thermoplastic films. The face and back layers of veneer were hardwood species (Mixed light hardwood) and core layer veneer was radiata pine (Pinus radiata D. Don). Thermoplastic film used as adhesive were polypropylene (PP) film and polyethylene (PE) film. Thermal analysis and tensile strength were investigated on each films. As a result, the melting temperature of PP and PE films were $163.4^{\circ}C$ and $109.7^{\circ}C$, respectively, and the crystallization temperature were $98.9^{\circ}C$ and $93.6^{\circ}C$, respectively. Tensile strength and elongation of each films appeared higher on the width direction than length direction. Considering the characteristics of the thermoplastic films, the test for the amount of film used was carried out by layering film to the target thickness on veneer. The effecting of layering direction of film on plywood manufacturing was conducted by laminating in the length and width directions of the film according to the grain direction of veneer. Tensile-shear strength of plywood in wet condition was satisfied with the quality standard (0.7 MPa) of KS F 3101 when the film was used over 0.05 mm of PP film and over 0.10 mm of PE film. Tensile-shear strength of plywood after cyclic boiling exceeded the KS standard when PP film was used 0.20 mm thickness. Furthermore, higher bonding strength was observed on a plywood made with width direction of film according to grain direction of veneer than that of length direction of film. Based on microscopic analysis of the surface and bonding line of plywood, interlocking between veneers by penetration of a thermoplastic film into inner and cracks were observed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.1
• /
• pp.11-17
• /
• 2003

pH value of sampled fogwater at source regions (above highway and road) in Yongin sites showed the lowest value and was increased after passing the forest stands. Changes of ion concentrations through the forest stands showed a lowering tendency at sampling sites. The fogwater passing the forest stands (Quercus mangolica and Pinus rigida) surrendered acid pollutants to crown and stem from the atmosphere. It was concluded that environmental moisture in the atmosphere is acidified in fogwater. The influence was extended to the pure zone, and the frequency of acid rain has increased. The forests are assumed to remove air pollutants because ion concentrations in fogwater decreased after passing the forests. The fogwater which functions as a local sink for pollutants (H$_2$SO$_4$, HNO$_3$, etc.) falling on plant surfaces is considered to effectively remove acid pollutants. But if the deposition of pollutants exceeds the capacity of purification, it would damage the forest ecosystem. Further investigation is necessary to identify tree species tolerant to acid pollutants.