• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.57-62
• /
• 2018

This study was designed to analyze the chemical composition and antioxidant activity of various vegetable oils (pumpkin seed oil, camellia seed oil, red pepper seed oil and peanut oil) using adsorbents (active carbon, acid clay, kaolin). Their chemical composition was analyzed by GCMS. Their antioxidant activity was evaluated by measuring their DPPH and ABTS radical scavenging activity. After the treatment with the adsorbents, the contents of most of the fatty acids and active ingredients contained in the four kinds of vegetable oils were reduced. After the treatment with the three adsorbents, the linoleic acid and erythrodiol contents of the pumpkin seed oil were reduced. In the case of the camellia seed oil, the fatty acids content was decreased, but there was no loss of vitamin E after the acid clay treatment. The content of the compound capsaicin, which forms part of the spicy component of red pepper seed oil, was reduced by 53.33% after the acid clay treatment. The peanut oil showed the lowest loss of sitosterol compound in the group treated with active carbon. The antioxidant activity was observed to be in the order of pumpkin seed oil (kaolin>acid clay>active carbon), camellia seed oil (acid clay>kaolin>active carbon), red pepper seed oil (kaolin>acid clay>active carbon) and peanut oil (active carbon>acid clay>kaolin).

• Journal of the Korean Chemical Society
• /
• v.65 no.3
• /
• pp.197-202
• /
• 2021

In this study, activated clay treated with H₂SO₄ (20% by weight) and heat at 90 ℃ for 8 h for acid white soil was used as an adsorbent for the removal of PO₄^3--P in water. Prior to the adsorption experiment, the characteristics of activated clay was examined by X-ray Fluorescence Spectrometry (XRF) and BET surface area analyser. The adsorption of PO₄^3--P on activated clay was steeply increased within 0.25 h and reached equilibrium at 4 h. At 5 mg/L of low PO₄^3--P concentration, roughly 98% of adsorption efficiency was accomplished by activated clay. The adsorption data of PO₄^3--P were introduced to the adsorption isotherm and kinetic models. It was seen that both Freundlich and Langmuir isotherms were applied well to describe the adsorption behavior of PO₄^3--P on activated clay. For adsorption PO₄^3--P on activated clay, the Freundlich and Langmuir isotherm coefficients, K_F and Q, were found to be 8.3 and 20.0 mg/g, respectively. The pseudo-second-order kinetics model was more suitable for adsorption of PO₄^3--P in water/activated clay system owing to the higher correlation coefficient R² and the more proximity value of the experimental value q_e,exp and the calculated value q_e,cal than the pseudo-first-order kinetics model. The results of study indicate that activated clay could be used as an efficient adsorbent for the removal of PO₄³-P from water.

• KSBB Journal
• /
• v.15 no.4
• /
• pp.342-345
• /
• 2000

A novel pre-purification method was developed for producing peroxidase to guarantee high purity and yield from plant cell cultures in large-scale process. This method was a simple and efficient procedure for the isolation and pre-purification of peroxidase from the biomass consisting of active clay treatment followed by cationic exchange chromatography. The use of active clay in the pre-purification process allows for rapid and efficient separation of peroxidase from interfering compounds and dramatically increases yield and purity of crude peroxidase for purification steps compared to alternative processes. This pre-purification process serves to minimize the buffer usage size and complexity of the HPLC operations for peroxidase purification. This process is readily scalable to a pilot plant and eventually to a production environment where mass production of material are expected to be produced.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.770-773
• /
• 1999

To obtain the basic data for the improvement of flayer and color in salt-fermented anchovy (Engraulis japonicus) sauce and for the inhibition of non-soluble precipitates formation during storage, experiments were carried out on the changes of chemical properties by treatment with 1, 3, 5 and $7\%$ (w/v) of active carbon and filter aids such as active clay, $Al_2O_3$ diatomaceous earth, and celite. Deceleration rate were $32\~33\%$ in case of $5\%$ (w/v) active carbon or $5\%$ (w/v) active clay treatments, but deodoration effect was not expected in all treatments. The inhibition rate of non-soluble precipitates formation in me of $5\%$ (w/v) active clay, diatomaceous earth and $Al_2O_3$ treatments. was shown as $82\%,\;73\%$, and $70\%$, respectively.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.189-190
• /
• 2020

The importance of indoor air quality management has recently been highlighted due to environmental problems such as indoor air pollution. Among indoor air pollutants, carbon dioxide occurs in cooking, heating, burning, and causes forgetfulness, dementia and amnesia. Radon, which occurs in building materials, soil and ground, is a type 1 carcinogen that causes lung cancer in the body through breathing. These substances can be released from the room through ventilation, but there is a limit to reducing the amount of indoor activity due to reduced ventilation conditions due to increased indoor activity time. However, these substances can be removed from the gas by adsorption. The purpose of this study was to identify the properties of granular active and powdered active white soil and mix them to make cement-based active white soil adsorbent matrix for carbon dioxide, fine dust and radon gas adsorption, and to evaluate indoor air improvements according to the mixing scale. The results of the experiment showed that active carbon dioxide adsorption performance increased for carbon dioxide and radon as the exchange rate increased through physical adsorption. In particular, the higher the replacement rate of the granular active bag, the better adsorption performance was shown.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.19-20
• /
• 2021

In order to reduce the emission of harmful substances that degrade indoor air quality, the Ministry of Environment strengthened the standards for the content of VOCs in paints to supply and sell eco-friendly paints. In this related study, an eco-friendly paint mixed with a powder-type absorbent material was prepared and its characteristics were reviewed. As the amount of powder-type absorbent material increased, the workability (viscosity, peeling, etc) decreased. Accordingly, this study aims to examine which particle size is suitable according to the particle size of the granular adsorbent while improving the problem of the powdery adsorbent by using the granular adsorbent. As an experimental plan, the particle size of granular activated clay is selected to be 0.250, 0.425, 0.710(mm), and the decrease rate of VOCs concentration and impact resistance are reviewed. As a result of the experiment, as the particle size of the granular activated clay increased, the decrease rate of the VOCs concentration increased and the impact resistance improved. Therefore, considering the problems that occur after actual painting, the particle size of granular activated clay of 0.425mm is suitable.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.35-36
• /
• 2023

Safety management of steel frame members is a very important part to maintain safety and function. However, precise inspection is not possible for steel frame members due to finishing materials and insulation materials, leading to poor inspection. For steel members, an insulating spray coating method is used for high thermal conductivity. The insulation spray method is not only uneconomical, but also has the disadvantage of spoiling the aesthetics. In addition, VOCs are released from paints used in spraying, so a solution is needed. In this study, heating paint was used to improve the disadvantages of the insulation spray coating method and the high thermal conductivity of steel frame members. In addition to this, in order to reduce VOCs generated from the paint, active clay was added to produce a functional exothermic paint, and then the experiment was conducted. As the amount of activated clay increased, the film thickness increased, and the VOCs emission and thermal conductivity decreased.

• Journal of the Korean Chemical Society
• /
• v.66 no.2
• /
• pp.78-85
• /
• 2022

Natural white clay was treated with 6 M of H₂SO₄ and heated at 80℃ for 6 h under mechanical stirring and the resulting acid active clay was used as an adsorbent for the removal of Cs⁺ in water. The physicochemical changes of natural white clay and acid active clay were observed by X-ray Fluorescence Spectrometry (XRF), BET Surface Area Analyser and Energy Dispersive X-line Spectrometer (EDX). While activating natural white clay with acid, the part of Al₂O₃, CaO, MgO, SO₃ and Fe₂O₃ was dissolved firstly from the crystal lattice, which bring about the increase in the specific surface area and the pore volume as well as active sites. The specific surface area and the pore volume of acid active clay were roughly twice as high compared with natural white clay. The adsorption of Cs⁺ on acid active clay was increased rapidly within 1 min and reached equilibrium at 60 min. At 25 mg L^- of Cs⁺ concentration, 96.88% of adsorption capacity was accomplished by acid active clay. The adsorption data of Cs⁺ were fitted to the adsorption isotherm and kinetic models. It was found that Langmuir isotherm was described well to the adsorption behavior of Cs⁺ on acid active clay rather than Freundlich isotherm. For adsorption Cs⁺ on acid active clay, the Langmuir isotherm coefficients, Q, was found to be 10.52 mg g^-1. In acid active clay/water system, the pseudo-second-order kinetic model was more suitable for adsorption of Cs⁺ than the pseudo-first-order kinetic model owing to the higher correlation coefficient R² and the more proximity value of the experimental value q_e,exp and the calculated value q_e,cal. The overall results of study showed that acid active clay could be used as an efficient adsorbent for the removal of Cs⁺ from water.

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.75-81
• /
• 2009

Benzo(a)pyrene[B(a)P] levels were determined in processed oils and by-products of corn oil, and removal protocol was formulated. The cause of high level B(a)P contents in corn oil was established. Corn germ had a B(a)P level more than 80% that of whole corn. B(a)P content in final deodorized corn oil was $2.15{\mu}g/kg$, after the usual refining process. B(a)P contents less than $2.0{\mu}g/kg$ could not be attained by routine refining process. However, deodorized corn oil, with B(a)P level of $0.09{\mu}g/kg$, could be prepared by treatment of oil with approximately 2% (w/w) mixed granules(acidic clay:active carbon= 90:10[w/w]). The optimal amount of active carbon was 10% (w/w) that of acidic clay;higher levels of active carbon was not required. The optimal particle size of active carbon was $50{\sim}100$ mesh, removal of B(a)P from bleached corn oil was efficient at this mesh size.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.351-354
• /
• 2005

A new isolation and purification method was developed aiming at increasing yield and purity for homoharringtonine. This method was a simple andefficient procedures, for the isolation and purification of homoharringtonine from Cephalotaxus koreana, consisting of solvent extraction, adsorbent treatment, low-pressure chromatography, and high performance liquid chromatography (HPLC). The crude homoharringtonine was efficiently pre-purified adequately to perform HPLC through a combination withadsorbent treatment and low-pressure chromatogaphy. The homoharringtonine can be simply obtained with high purity and yield from crude homoharringtonine by HPLC. Purified homoharringtonine was characterized.