• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.1
• /
• pp.5-26
• /
• 1996

O/W/O(oil in water in oil)형 유화액막에 의한 2성분 탄화수소 혼합물인 toluene-cyclo hexane의 분리에 있어서 투과율, 막의 안정성과 분리계수에 미치는 영향을 계면활성제 농도, emulsion과 용매와의 교반속도 등을 변수로 하여 실험하였다. 계면활성제의 농도가 증가함에 따라 투과율은 증가하는데 0.5wt% 이상에서는 증가율이 둔화 되었다. 막 파괴율은 0.1wt%에서 가장 낮게 나타났으며, 그 이상에서는 농도가 증가하면서 파괴율도 증가하였다. 또한 분리계수는 계면활성제의 농도가 0.5wt%에서 가장 높게 나타났다. 에멀젼 제조 시 교반속도 변화에서는 투과율이나 막 파괴율에 큰 영향을 미치지 않는 것으로 나타났다. 막 강화제의 농도가 증가함에 따라 투과율은 감소하였고, 에멀젼과 용매의 접촉 시 교반속도가 증가 할수록 막 파괴율도 증가하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.113-113
• /
• 2010

최근 태양전지 제작 등에 응용되고 있는 $NH_3/N_2/SiH_4$ 유도결합 플라즈마 방전에서 활성종의 플라즈마 변수 의존성을 이론적인 계산을 통해 분석한다. 먼저, 수집 및 계산 가공된 반응계수들에 대한 신뢰성을 검증하기위해 공간평균 전산모사를 수행하여 최종적으로 계산된 전자온도 및 밀도값들이 합리적인 범주에 속해 있는지 확인한다. 검증된 반응계수들을 바탕으로 공간평균 유체방정식에서 정상상태를 가정하여 중성종 및 활성종 밀도를 전자밀도 및 온도 등의 플라즈마 변수에 대한 함수로 표현하고, 이에 대한 수치해석적인 해를 얻음으로써 그 의존성을 분석해 본다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.11a
• /
• pp.29-41
• /
• 1986

마찰계수는 서로 접촉하여 운동하는 두 물체간의 특성으로 간주되며 일반적으로 상대속도나 작용하중에 별로 영향을 받지 않는 것으로 알려져 있다. 화학적으로나 물리적으로 오염되지 않은 깨끗한 금속간의 마찰실험의 경우, 이 실험이 불활성 가스나 진공내에서 행해질 경우 상당히 큰 마찰저항을 경험하게 되나, 공기중에서의 실험에서는 작은 마찰저항이 기록되어 산화막이나 다른 오염물에 의해 형성된 막이 마찰저항을 감소시킨다고 보고 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.159-167
• /
• 2022

The present study assessed the micro structure and durability characteristics of ternary blended cement with different types of alkali activators. Ground granulated blast furnace slag(GGBS) and ferronickel slag(FNS) was replaced until 50 % of the weight of cement. In addition, potassuim hydroxide and sodium hydroxide were used for comparing the properties of different type of alkali activator. Ternary blended cement with alkali activators showed higher peak portlandite peak than that of OPC(Ordinary Portlande Cement) and non activated ternary blended cement. Also, there was no new hydration products in ternary blended cement or/and alkali activators. Based on the mercury intrustion porosimetry(MIP) test result, ternary blended cement increased macro pore while alkali activated ternary blended cement modified pore structure and increased microp pore as compared to OPC as control. Combination with alkali activators is desirable to enhance the compressive strength and freeze thaw resistance.

• Journal of the Korean Vacuum Society
• /
• v.11 no.2
• /
• pp.108-112
• /
• 2002

We investigated the secondary electron emission characteristics of MgO layer used as the protecting material in a.c. plasma display panel(a.c.-PDPs) using a pulsed ion beam technique, where the surface charging can be effectively suppressed during the measurement. The measurement of the secondary electron emission coefficients ($\gamma$) on the surface of $SiO_2$ was carried out and then, it was found that the yields were dependent on incident ion energies. In addition, it was clearly demonstrated that the sputtering on MgO surface leads to lower yields, which suggests that the surface plays a key role on the operating conditions, such as life time, fast response, and etc.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.21 no.2
• /
• pp.129-139
• /
• 1995

To confirm the usefulness of partial least-squares(PLS) and multiple scattering correction(MSC) method for quantitation of surfactants in [quantitative methods using FT-lR, reconsitituted mixtures of LAS, MES and ELA-9 were tested. Each mixture was dissolved in 50% EtOH, dried, and applied to the KBr cell. From the IR spectra of these mixture, the variance spectrum was obtained. After repeated calibrations for the various regios of this spectrum, we found that 1245-1130cm-1 and 1070-1010cm-1 showed the strong correlation with each component of the sample mixture: all the correlation coefficients were 1.000 and quantitative errors did not exceed 0.32%. From this result, we concluded that PLS method and MSC method are very useful and can be successfully applied to Quality control.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.25-33
• /
• 1984

The effect of particle size on adsorption of trihalomethane have been studied. Using mean particle sizes ranging from 0.73 to 2.03 mm, physical properties of carbon and trihalomethane adsorption characteristics have been investigated experimentally. With increasing particle size specific surface area and pore volume decreased, and the mean pore radius increased significantly. Large pores were dominant in large particles, while small particles were composed of small pores. Isotherm studies were conducted using static bottle point technique and the results were well described by the Freundlich isotherm equations. The adsorption capacity increased significantly with decreased particle size. Additionally micro-column tests were carried out, and the results were compared with the model simulation. From the micro-column studies it was found out that the film transfer coefficient were almost constant, and the differences in the trihalomethane removal efficiency was mainly due to the differences in the adsorption capacity of the particles of different size.

• Journal of the Korean Chemical Society
• /
• v.44 no.1
• /
• pp.37-44
• /
• 2000

In order to develope bioactive substances, dried fmit body of Daedalea dickinsii collected from Taeback mountain was extracted with ethanol, The compounds 1 and 2 were purified by solvent extraction, silica gel column chromatography and recrystallization from the ethanol extracts. Melting point, molecular weight and molar extinction coefficient of the compound 1 were estimated to be $167{\sim}168^{\circ}C$, 572 and 5,040 at 208 nm. The structure of this compound 1 has been elucidated to be 24S, 25S, $3{\alpha}-carboxyacetylquercinic$ acid using spectroscopic properties. This compound showed antibiotic activities against fungi, yeasts and bacteria and it also showed anticancer activity $IC_{50}=64.5\;{\mu}M$) against Korean stomach cancer cell. Melting point, molecular weight and molar extinction coefficient of the compound 2 were estimated to be $233{\sim}235^<\circ}$, 572 and 5,080 at 208 nm. The structure of this compound was elucidated to be 24S, 25R, $3{\alpha}-carboxyacetylquercinic$ acid. The compound 2 showed different antibiotic activities with the compound 1.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.2
• /
• pp.153-160
• /
• 2013

The peel from seven types of citrus was extracted with 80% methanol, and their phenolic compound content, oxygen radical absorbance capacity (ORAC), inhibitory activities of nitric oxide (NO), and reactive oxygen species (ROS) production induced by LPS and t-BHP in LPS-activated RAW 264.7 cells were measured. Total phenolic content was high in Yungkyool, Cheonhyehyang, and Jinkyool (30.6, 30.2, and 28.2 mg GAE/g, respectively), while total flavonoid content was high in Yungkyool and Jinkyool (30.3 and 25.5 mg RE/g, respectively). ORAC was the highest at 1,076 mM TE/g in Yungkyool, followed by Cheonhyehyang (1,012), Jinkyool (984), and Hallabong (914). High inhibitory activity against NO production was shown in Cheonhyehyang, Yungkyool, and Jinkyool with $IC_{50}$ values of 215.3, 259.2, and 328.9 ${\mu}g/mL$, respectively. LPS-induced ROS production was inhibited by 16.4% and 12.8% in Hallabong and Jinkyool, while t-BHP-induced ROS production was inhibited by 28.7%, 26.1%, and 26.6% in Jinkyool, Hallabong, and Cheonhyehyang, respectively. Correlation coefficients between total phenolic, total flavonoid content, and ORAC were 0.884 and 0.855. Inhibitory activity against NO production showed higher correlation with total phenolic content than total flavonoid content. It was concluded that citrus peels had potent antioxidant activities and could be used as natural antioxidants in the food and pharmaceutical industries.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.528-536
• /
• 2023

In Korea, from January 2023, the Act on Labeling and Advertising of Food was revised to reflect the use-by-date rather than the sell-by-date. Hence, the purpose of this study was to establish a system for calculating the safety factor and determining the recommended use-by-date for each food type, thereby providing a scientific basis for the recommended use-by-date labels. A safety factor calculation technique based on scientific principles was designed through literature review and simulation, and opinions were collected by conducting surveys and discussions including industry and academia, among others. The main considerations in this study were pH, Aw, sterilization, preservatives, packaging for storage improvement, storage temperature, and other external factors. A safety factor of 0.97 was exceptionally applied for frozen products and 1.0 for sterilized products. In addition, a between-sample error value of 0.08 was applied to factors related to product and experimental design. This study suggests that clearly providing a safe use-by-date will help reduce food waste and contribute to carbon neutrality.