• Clean Technology
• /
• v.21 no.2
• /
• pp.96-101
• /
• 2015

Hematite reduction using hydrogen was conducted and the various process parameters were closely observed. A lab scale fluidized bed unit was designed especially for this study. The optimal values of the gas velocity, reduction time and temperature were evaluated. The values which indicated the highest reduction rate were set as fixed parameters for the following tests starting with the reduction time of 30 minutes and 750 ℃ of temperature. Among these variables the one with the highest interest was the gas specific consumption. It will tell the amount of the gas which is required to achieve a reduction rate of over 90% at the optimal conditions. This parameter is important for the scale up of the lab scale unit. 1,500 Nm³/ton-ore was found to be the optimal specific gas consumption rate at which the reduction rates exhibit the highest values for hematite.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.11
• /
• pp.1977-1983
• /
• 2000

SCR(selective catalytic reduction) pilot plant for reduction of the nitrogen oxides using diesel oil as a reductant was installed at the NG(natural gas) fired combined cycle and the activity of Pt(0.3%)/Zeolite catalyst was studied in real flue gas condition according to the amount of reductant. reaction temperature and space velocity. NOx conversion gradually increased with increasing the diesel oil concentration up to C/N ratio 5.5(C/N ratio: the ratio of the number of carbon atom to the number of NOx molecules included in the flue gas). Increasing the reaction temperature. NOx conversion increased and reached a maximum conversion of 50% at $190^{\circ}C$. NOx conversion did not changed with increasing the space velocity up to 18,500/hr and then gradually decreased. These results reveal the potential for diesel oil as a reductant for de-NOx SCR process.

• The Korean Journal of Mycology
• /
• v.13 no.2
• /
• pp.79-82
• /
• 1985

The experiment of protoplast regeneration and reversion were undertaken to provide a basic techniques for protoplast manipulation. Protoplasts of Pleurotus florida and Pleurotus ostreatus were reverted to normal hyphal growth and the reversion frequency of both fungal protoplasts were $0.24{\sim}3.19%$. Reversion medium stabilized with 0.6 M potassium chloride and sucrose was better than the other stabilized one. The protoplast reversion frequency was increased when various amino acid and vitamin compounds were added to the hypertonic mushroom complete agar medium.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.96-104
• /
• 2009

In order to lower a reaction temperature with high conversions for simultaneous catalytic reduction of NO and $N_2O$ over Pd-Rh supported mixed metal oxide honeycomb catalysts, $H_2$ or CO was utilized as a reductant. When using the reductants, the effects of reaction conditions were examined in NO and $N_2O$ conversions, where reaction temperatures, concentrations of the reductants and oxygen and the concentration ratio of $N_2O$ to NO were varied. In using $H_2$ reductant, larger than 50% of NO and $N_2O$ conversions was observed at the temperatures below $200^{\circ}C$ in absence of $O_2$. In using CO reductant, NO and $N_2O$ conversions increased from the temperatures higher than $200^{\circ}C$ and $300^{\circ}C$, respectively. However, in use of both reductants, NO and $N_2O$ conversions decreased with increasing oxygen concentration. As a result, $H_2$ reductant could reduce simultaneously NO and $N_2O$ at relatively lower reaction temperature than CO. Also, NO and $N_2O$ conversions were less influenced by using $H_2$ reductant than CO one. Concentration ratio between NO and $N_2O$ did not affect their conversions regardless the type of reductants. Pretreatment of the catalyst in $H_2$ was more effective in simultaneous reduction of NO and $N_2O$ at low reaction temperature than that in $O_2$.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.39-45
• /
• 1998

We smelted thc pellets made by mixing the distilled carbon from wlISte Lires, LD converter dust and slag with reduction process in the revcrberatory furnace. Thc obtained results are as follows 1) The removal mte of zinc appears above 97% after T reducing the pellets at $1300^{\circ}C$ for Ihr and the zinc content in the residue are 0.1~D.2%. 2) Under the mixing condition of 500 g LD dust. 150-200 g LD slag and 30-50 g distilled carbon of waste lires the removal raho of zinc shows above 95%, while t the 50-60% Fe remains in the residue. 3) After smelting at $1350^{\circ}C$ for 3hrs, the recovery ratio of pig iron reduced from lhe p pellets containing 15-20% LD slag and 4.1-7.2% distilled carbon of waste tires appears in the range of 89.3-92%. 4) Tbe c chemical composition of the recovered pig iron is 1.7%C, O.05%P, 0.05%S and balance Fe. 5) Tbe recovered dust from the d dust collcctor alter finishing the reduction rcaction appears as a crude zinc oxide conLaining 60% zinc.

• Journal of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.46-52
• /
• 1983

Selective reduction of halide (Br, I) with lithium borohydride in halogen compounds containing chloro, nitro, ester and nitrile groups was achieved satisfactorily. 1-Bromo-4-chlorobutane was reduced to 1-chlorobutane in 96% yield and the reduction of p-nitrobenzyl bromide gave p-nitrotoluene in 98% yield. However, the selectivity on the reduction of ethyl 3-iodopropionate and 4-bromobutyronitrile required the presence of equimolar pyridine to give good yield of ethyl propionate (93%) and n-butyronitrile (88%), respectively. In competitive reduction of 1-bromoheptane and 2-bromoheptane, lithium borohydride reduced 1-bromoheptane preferentially in the molar ratio of 93:7.

• Journal of Life Science
• /
• v.20 no.10
• /
• pp.1468-1475
• /
• 2010

Sulfate reduction rates (SRR) using $^{35}SO_4^{-2}$, sulfide producing rates (SPR) using gas chromatography, the number of sulfate reducing bacteria (SRB) using the most probable number (MPN) method, and soil components (moisture, ammonium, total nitrogen, total organic carbon, total carbon, total inorganic phosphorus, total phosphorus, and sulfate) using standard methods in the organic/conventional rice paddy soils, cleaned/polluted reservoir soils, and cleaned/polluted foreshore soils were studied with the change of seasons. The average SRR was more related to the number of SRB and soil components (especially nitrogen and phosphorus) than sulfate concentration. SRR was also recorded to be highest in October soil samples. However, SPR was higher in foreshore soils containing a high concentration sulfate than in fresh water soils, and it was also recorded to be higher in the polluted areas than in clean areas. From these results, we can conclude that the SRR and SPR of anaerobic environments were affected by the number of SRB, soil components and temperature.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.10a
• /
• pp.91-92
• /
• 2016

• Resources Recycling
• /
• v.31 no.6
• /
• pp.18-24
• /
• 2022

Dry reduction using natural gas was proposed to recover tin from waste tin oxide generated in a tin bath that was used for controlling the smoothness of architectural glass during production, and the reduction behavior was investigated. The utilized vertical natural gas dry reduction system is capable to process 4 L or 20 kg depending on input raw materials. The system was established by applying the upper intake and lower discharge method. The recovery rate was 97.2% at 800 ℃ and 4 sccm flow rate and increased with the amount of input gas. Hydrogen accounted for 23% of the discharge gas, showing a 16.6% hydrogen conversion rate. The reaction behavior of tin recovered via natural gas reduction provides basic data on the new waste resource reduction/recovery technology.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.379-381
• /
• 2001

굴절율 측정에 의하여 당 성분을 정량하는 방법을 이용한 장치로, 글루코오스의 환원성에 기초하여 산화ㆍ환원 반응을 이용한 적정법이나 흡광도 측정법과 비교하여 시약이 필요없고 시간이 단축되는 장점이 있다. 그리고, 보통의 굴절율 측정기(예로 Abbe refractometer)가 당 농도 0.5％일 때의 굴절율 값 단위로 측정되는 한계를 극복하여 본 당 모니터링 장치는 바탕 물질과의 굴절율 차이를 증폭한 값으로 data(differential refractive index)를 얻을수 있으므로 글루코오스 농도 0.01% 단위까지 정량할 수 있어서 0.1% 이하의 저농도도 측정 가능하며 그 이상의 농도 범위에서도 측정 오차를 줄일수 있는 장점이 있다. (중략)