• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.396-398
• /
• 2006

PdPt/C (Pd:Pt atomic ratio of around 19:1 60wt, %) 촉매를 고분자전해질 연료전지용 전극 촉매소재의 적용하였다. PdPt/C 촉매를 산화극 촉매로, 환원극 촉매로는 Pt/C 촉매를 사용하고 반대로 산화극 촉매는 Pt/C 촉매, 환원극 촉매로는 PdPt/C 촉매를 사용했을 때, PdPt/C 촉매를 산화극과 환원극 촉매로 동시에 사용했을 때의 고분자전해질 연료전지의 단위전지 성능을 각각 비교하였다. PdPt/C촉매를 산화극에만 적용했을 때에 Pt/C 상용촉매를 산화극과 환원극에 모두 적용했을 때의 성능만큼 좋은 성능을 확인할 수 있었다. 환원극 촉매는 Pt/C를 사용하고 산화극 촉매를 PdPt/C Pt/C Pd/C를 사용하였을 매의 성능을 비교하였다. Pd/C를 산화극 촉매로 사용한 단위전지가 나머지 두 경우의 성능에 비하여 현저히 떨어짐을 확인할 수 있었다. 이는 극소량의 Pt 량을 포함한 PdPt/C 촉매가 고분자전해질 연료전지의 산화극 Pt/C 촉매의 대체촉매로 사용 가능함을 보여준다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.9.1-9.1
• /
• 2011

나노입자는 벌크에 비해 월등히 큰 비표면적(surface-to-volume ratio)과 작은 사이즈에서 오는 양자효과로 인해 촉매나 나노 전자 소자 등 여러 분야에서 응용되고 있다. 특히 백금 나노입자는 수소나 메탄올의 산화, 산소환원 반응의 독보적인 촉매로서 연료전지의 산화극과 환원극의 촉매로 널리 활용되고 있다. 본 연구에서는 높은 가격의 백금의 사용량을 줄일 수 있는 합금 나노입자 촉매에 대한 연구의 일환으로 Pd, Au, Cu, Ag 등의 원소를 활용한 합금 나노입자에 대한 구조 및 열역학적 안정성에 대한 연구를 수행하였다. 다양한 합금에 대한 원자간 포텐셜을 개발하였고, 이를 기반으로 몬테카를로 및 분자동력학 시뮬레이션을 수행하여 Pd-Pt, Cu-Pt, Ag-Pt, Au-Pt 이원계 합금 나노입자의 다양한 원자 구조 및 형상에 따른 결합에너지와 열역학적 특성에 대하여 분석하였다.

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.157-162
• /
• 2014

In this research, we investigate electrical performance and electrochemical properties of carbon supported Pt (Pt/C) that is synthesized by polyol method. With the Polyol_Pt/C that is adopted for oxygen reduction reaction (ORR) as cathode of proton exchange membrane fuel cells (PEMFCs), their catalytic activity and ORR performance and electrical performance are estimated and compared with commercial Pt/C(Johnson Mattey) catalyst. Their electrochemically active surface (EAS) area are measured by cyclic voltammetry (CV), respectively. On the other hand, regarding ORR activity and electrical performance of the catalysts, (i) linear sweeping voltammetry by rotating disk electrode and (ii) PEMFC single cell tests are used. The CV measurement demonstrate EAS of Polyol_Pt/C is compared with commercial JM_Pt/C. In case of Polyol_Pt/C, its half-wave potential, kinetic current density are excellent. Based on data obtained by half-cell test, when PEMFC single cell tests are carried out, current density measured at 0.6V and maximum power density of the PEMFC single cell employing Polyol_Pt/C are better than those employing commercial Pt/C. Conclusively, Polyol_Pt/C synthesized by modified polyol process shows better ORR catalytic activity and PEMFC performance than other catalysts.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.11-25
• /
• 2009

Fuel cells are expected to be one of the major clean new energy sources in the near future. However, the slow kinetics of electrocatalytic hydrogen oxidation reaction (HOR) and oxygen reduction reaction (ORR), and the high loading of Pt for the anode and cathode material are the urgent issues to be addressed since they determine the efficiency and the cost of this energy source. In this review paper, a new approach was developed for designing electrocatalysts for the HOR and ORR in fuel cells. It was found that the electronic properties of Pt could be fine-tuned by the electronic and geometric effects introduced by the substrate alloy metal and the lateral effects of the neighboring metal atoms. The role of substrate was found reflected in a volcano plot for the HOR and ORR as a function of their calculated d-band centers. This paper demonstrated a viable way to designing the electrocatalysts which could successfully alleviate two issue facing the commercializing of the fuel cell-the cost of electrocatalysts and their efficiency.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.85.2-85.2
• /
• 2011

현재 중온의 고체산화물 연료전지를 위해 다양한 전해질에 대한 연구되었으며 1994년 Ishihara et al.에서 1074K의 온도에서 높은 이온전도도를 갖는 페록스카이 구조를 갖는 LSGM 물질을 발표하였다. Sr과 Mg을 도핑한 Lanthanum gallate는 이온전도도가 1073K에서 0.14S/cm로 YSZ의 5배로 높은 이온전도도를 갖고 있으며 산화환경에서부터 환원환경에서 화학적으로 안정한 특성을 갖고 있다. 또한 LSGM 전해질은 넓은 산소 농도범위에서 안정적인 특성을 갖는 장점을 갖고 있다. 그러나 LSGM은 가장 널리 사용되는 연료극의 Ni 촉매와 고온 소결시 상호확산현상에 의한 2차상을 생성시켜 성능 저감의 원인으로 그 해결방안이 요원한 실정이다. 이에 본 논문에서는 LSGM 전해질에 LSGM scaffold를 형성하고 형성된 scaffold에 연료극 촉매 solution을 infiltration 시켜 저온에서 anode를 형성하여 그 성능을 연구하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.97.1-97.1
• /
• 2011

저온에서 양이온 고분자막을 사용하는 고분자 연료전지의 경우 뛰어난 성능과 다양한 응용분야로 인해 많은 연구와 실증이 이루어지고 있지만 공기극에서의 느린 산소 환원반응으로 인해 백금과 같은 귀금속의 사용이 불가피하고 백금의 제한된 매장량과 높은 가격으로 인해 상용화가 늦어지고 있다. 그래서 많은 연구자들이 합금 촉매 또는 비귀금속 촉매를 이용한 전극 개발에 집중하고 있다. 알칼리 분위기에서 저가의 전이 금속들이 백금과 비슷한 활성을 보이고 고체 음이온 교환막이 개발됨에 따라 최근 알칼리 연료전지가 다시금 큰 주목을 받고 있다. 그러나 고분자 연료전지와는 달리 아직 촉매나 전해질막, 이오노머의 특성 및 메커니즘에 관해 별로 알려진 것이 없다. 본 연구에서는 직접 개발한 세공충진막 형태의 탄화수소계의 음이온 교환막과 비귀금속 공기극 촉매를 이용하여 막전극접합체(MEA)를 개발하였고 촉매 및 이오노머 함량과 같은 전극 조성, 막전극접합체의 제조 및 체결, 가습이나 가스조성 등의 단위전지 운전조건과 같은 다양한 변수에 대해에 최적 조건을 도출하고자 하였다. 공기극 촉매는 Cu-Fe/C를 이용한 상용 촉매를 이용하였고 이오노머의 경우는 탄화수소계의 상용 제품을 사용하였으며 음이온 교환막에 전극층을 형성하기 위해서는 스프레이 공정을 이용하였다. 단위전지를 통해 성능을 확인하였고 임피던스 및 CV를 통해 전기화학적인 특성을 규명하였다. 조건의 최적화를 통해 상당한 성능 향상을 이루었으나 추가적인 성능 향상 및 내구성 확보 등에 대해 계속적인 실험을 진행할 예정이다.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.31-37
• /
• 1999

Copper-containig enzyme, laccase (Rhus vernicifera) was immobilized onto gold electrode using self-assembly technique and its surface properties and catalytic activities were examined. Laccase is an oxidoreductase capable to oxidize diphenols or diamines by 4-electron reduction of molecular oxygen without superoxide or peroxide intermediates. The electrode surface were modified by $\beta-mercaptopropionate$ to have a net negative charge in neutral solution and positively charged laccase (pI=9) was immobilized by electrostatic interaction. The successful immobilization was confirmed by cyclic voltammograms which showed typical surface-confined shapes and behaviors. The amount of charge to reduce the surface was similar to the charge calculated assuming the surface being covered by monolayer. The activity of the immobilized enzyme was tested by the capbility of oxidizing a substrate, ABTS (2,2-azine-bis-(3-ethylbenzthioline-6-sulfonic acid) and it was maintained for $2\~3$ days at $4^{\circ}C$. The immobilzed laccase showed about $10\~15\%$ activity compared to that in solution. The laccase-modified electrode showed the activity of elefoocatalytic reduction of oxygen in the presence of mediator, $Fe(CN)_6^{3-}$ The addtion of azide which is an inhibitor of laccase compeletly eliminated the catalytic current.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.999-1005
• /
• 1996

Pt catalyst on carbon black was prepared by colloidal method, ion exchanging method and methanol reducing method. The colloidal method has been used generally. At ion exchanging method, $H^+$ of functional group on carbon surface made by oxidation treatment was exchanged with Pt ion. At methanol reducing method, Pt was impregnated on carbon to reduce by methanol contained with surfactants. With TEM and XRD, Pt particle size impregnated on carbon by various methods was $30{\sim}50{\AA}$. Loading yield was about 100%, loading yield of ion exchanging method was 99.92% by DCP analysis and 99.87% by combustion method. Within 60 hour, current density of oxygen reduction was $460mA/cm^2$ at 0.7V(vs. RHE) at colloidal method. It was the better performance than catalyst prepared by ion exchanging, methanol reducing method. But, it was shown some decrease of performance for long operation time(after 100hour), catalyst prepared by methanol reducing method was shown stable performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.10
• /
• pp.955-965
• /
• 2014

Transport phenomena of reactant and product are directly linked to intrinsic inhomogeneous random configurations of catalyst layer (CL) that consist of ionomer, carbon-supported catalyst (Pt/C), and pores. Hence, electrochemically active surface area (ECSA) of Pt/C is dominated by geometrical morphology of mass transport path. Undoubtedly these ECSAs are key factor of total fuel cell efficiency. In this study, non-deterministic micro-scale CLs were randomly generated by Monte Carlo method and implemented with the percolation process. To ensure valid inference about Pt/C catalyst utilization, 600 samples were chosen as the number of necessary samples with 95% confidence level. Statistic results of 600 samples generated under particular condition (20vol% Pt/C, 30vol% ionomer, 50vol% pore, and 20nm particle diameter) reveal only 18.2%~81.0% of Pt/C can construct ECSAs with mean value of 53.8%. This study indicates that the catalyst utilization in fuel cell CLs cannot be identical notwithstanding the same design condition.

• Journal of Hydrogen and New Energy
• /
• v.31 no.5
• /
• pp.444-452
• /
• 2020

This study investigated the cathode catalyst of direct borohydride/hydrogen peroxide fuel cells for space exploration. Various catalysts such as Au, Ag, and Ni were supported on multiwalled carbon nanotubes (MWCNTs). Various techniques, such as transmission electron microscopy, Brunauer-Emmett-Teller method, scanning electron microscopy, and X-ray diffraction were conducted to investigate the characteristics of the catalysts. Fuel cell tests were performed to evaluate the performance of the catalysts. Ag/MWCNTs exhibited better catalytic activity than the Ni/MWCNTs and better catalytic selectivity of the Au/MWCNTs. Ag/MWCNTs presented good catalytic activity and selectivity even at an elevated operating temperature. The performance of Ag/MWCNTs was also stable for up to 60 minutes.