• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.569-576
• /
• 2008

By the development of international trade in last decades, Korean International Trade has been grown rapidly and Korean Port and Port facilities have been improved stimultaneously: finally volume of the marine traffic increased rapidly. Presently, 15 VTS centers have serving in Korean waters and since the introduction of the first VIS Center in Korea there is no quantitative analysis to find workload of VIS operator. After that Port-MIS and De-brief data have been gathered for 7 days and inbound-outbound vessels time-g/t table prepared and traffic volume examined for each V1S center. Hence $L^2$ conversion traffic volume and dangerous vessel ratio obtained Later on conversion controlled number obtained by denoting ratio 1.0 to directly controlled vessels by VTSO and denoting ratio 0.3 to indirectly controlled vessels by VTSO. Traffic volume, large vessel ratio, dangerous vessel ratio, dimension of VTS controlled area, marine accident occurrence frequency and communication volume of comm. log can be counted as a factor which influence to workload of VTSO. All those factors have been examined and analyzed. Finally, ship's size and dangerous vessel ratio have been chosen to derive the Number of composite conversion control for workload formula.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.149-162
• /
• 1999

One of the most important steps of the design, capacity and operation analysis stapes in the two-lane two way highways is the effect of heavy vehicle to traffic flow quality. This heavy vehicle's effect on traffic flow can be represented as PCE, which is the number of passenger cars that are displaced by a single heavy vehicle of a particular type under prevailing roadway, traffic, and control conditions. In this paper, we focus on the heavy vehicles effect on volume, speed, delay, and the maneuver of freedom which are major MOE's in traffic operation analysis and PCE criterion which should be measurable, determinable and able to reflect the traffic flow characteristics. Therefore, the objective of the paper is to determine the PCE criterion and to develop a new PCE determination method. In this study, delay is adopted as PCE criterion and, for calculation of delay, the highway is divided into the passing zone and the no-passing zone. PCE is determined by comparing the delay due to total traffic flow interaction with the delay due to a single heavy vehicle, Also, this paper proposes a new method to determine the average PCE on the highway that has the passing zones and no-passing zones.

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.1-6
• /
• 2005

• Journal of Korean Society of Transportation
• /
• v.19 no.1
• /
• pp.77-88
• /
• 2001

Until now, though most of the studies related to demand estimation method using traffic counts use methods based on singleclass, travel demands or flows are made by mixing various vehicles in real networks. In general, existing demand estimation methods based on traffic counts estimate O/D by converting a multiclass O/D matrix and traffic counts into a singleclass O/D matrix and traffic counts through PCE conversion, and analyze a O/D matrix by dividing into a multiclass O/D matrix and traffic counts after multiplying an estimated O/D matrix by the fixed ratio of a singleclass O/D matrix and traffic counts before PCE conversion. However, the merits of a demand estimation method based on multiclass calculate each route choice ratio about multiclass O/D, and maximize the estimation capability of multiclass by calculating each gradient, the reduction direction of objective function. Therefore, this study aims to establish a demand estimation method which considers congestion between vehicle and vehicle by using multiclass instead of singleclass.

• Journal of Korean Society of Transportation
• /
• v.22 no.4 s.75
• /
• pp.43-56
• /
• 2004

The KHCM procedure is a micro level analysis at signalized intersections requiring a lot of input variables and complex computations. The research was to investigate the possibility of simplifying the analysis procedures by using the generalized or the combined variables that less influence on the adjusted traffic volume and through-car equivalents of left or right turns. It was also tried to make lane grouping into directional flow ratio(v/s) based on a field surveys. The maximum and minimum values of each variables were compared with each other through the KHCM analysis procedures in terms of control delay. The lane grouping and the synthetical influence of a simplified method was evaluated with the scenario built in prevailing maximum and minimum conditions. The study showed that the control delay was not significantly sensitive to the selected variables and the lane grouping and their synthetical influence as well.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.2
• /
• pp.153-160
• /
• 2017

It may be reasonable to consider density per unit area over time rather than analyze traffic volume, which is simply the traffic volume per unit of time, in assessing the maritime traffic congestion of a certain area. This study contributes to the standardization of maritime traffic congestion assessment methods for the maritime traffic safety diagnosis institute while seeking a new method to minimize evaluation error due to converted traffic volume per ship tonnage level. To solve this problem, a method to evaluate maritime traffic congestion by comparing the area occupied by a vessel with the area of its route using vessel identification data from the Automatic Identification System (AIS) has been proposed. In this new model, it is possible to use actual data due to the development of information and communication technology, reducing conversion error while allowing for the evaluation of maritime traffic congestion by route.

• Journal of Korean Society of Transportation
• /
• v.16 no.4
• /
• pp.99-112
• /
• 1998

국가경제의 기반시설인 지역간 고속도로와는 달리 도시고속도로는 도시내 교통을 담당하는 교통시설로서 대부분의 도시에서 건설중이거나 운용 중에 있다. 연속류 도로라는 시설측면을 지역간 고속도로와 비슷하나 이용주체, 차량구성비, 정시성, 제한속도 등 그 성격에는 다소 차이가 있을 것으로 판단된다. 이런 이유에서 현재 도시고속도로의 계획이나 운영에 대한 지침이 지역간 고속도로의 계획 및 운영에 대한 지침과 동일시 되고 있다는 점은 불합리한 것으로 판단된다. 그러므로, 본 연구에서는 도시고속도로의 계획과 운영에 대한 지침을 마련하기 위해 현재 운영중인 대구신천대로를 대상으로 교통류특성 등 기초적 연구를 수행하였다. 연구결과를 간략하게 나타내면 다음과 같다. . 교통류 모형분석에서 기존의 Greenshield 모형이 설명력 90%이상을 나타냈다. . 승용차환산계수 분석에서 중형차량이 1.16, 대형차량이 1.47로 분석되었다. . 용량분석에서 최대관측교통량은 4,684pcphpl, 차두시간분석은 2,432pcphpl, 교통류 모형에서는 2,422pcphpl로 분석되어, 대구신천대로의 서비스용량은 2,300pcphpl에 가까운 것으로 판단되며, 차로폭, 측방여유폭에 따른 보정으로 이상적 조건에서의 용량은 약 2,400pcphpl로 분석되었다. 이 결과는 도시고속도로가 지역간 고속도로의 기본교통용량 2,200pcphpl보다 약 200대 정도 높을 것으로 추정된다.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.47-56
• /
• 2003

There are no specific criteria deciding what type of crosswalk installs although 4 typed crosswalks at signalized intersections classify according to number of stop line, spacing from the border of intersections and existence of traffic islands or not. Accidents involving pedestrians at signalized intersections are classified by type of crosswalks by traffic volume, pedestrian volume at crosswalk, intersection geometry and phase in view of pedestrians' safety at 50 intersections in Gwangju. The Multiple regression models are applied to express the pedestrian accident rate. In addition, process deciding what type of crosswalk installs which includes accident rate involved pedestrian is changed into number of accident is represented to reduce number of accidents. This paper presents what type of crosswalk installs in order to reduce pedestrian involved accidents at new or existing crosswalk.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.74-75
• /
• 2021

At the 104th IMO MSC, it was decided to make a code for the operation of MASS(Maritime Autonomous Surface Ship). In addition, the government announced a roadmap for preemptive regulatory innovation for autonomous ships and identified 31 related regulatory issues and suggested improvements to revitalize the autonomous ship industry. This study aims to analyze the ship turning left on the route as a study on how to operate the route system when operating MASS. We intend to derive the current congestion degree of the special area of Busan New Port through maritime traffic survey and use simulation to derive the congestion degree of the special area due to the size of ships and increase in traffic volume. We would like to propose an appropriate amount of traffic (the number of L-converted). It is believed that the research results can be used as basic data for route operation when operating not only current ships but also MASS.

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.7-16
• /
• 2000

This paper is focused on verifying time-space repetition of the highway accident and finding the their causes and deterrents. We classify all months into several seasonal groups, develop the model for each seasonal group and analyze the results of these models for Joong-bu highway. The existence of seasonal effect is verified by the analysis or self-organizing map and the accident indices. Agglomerative hierarchical cluster analysis which is used to decide the seasonal groups in accordance with accident patterns, winter group, spring-fall group. and summer group. The accident features of winter group are that the accident rate is high but the severity rate is low. while those of summer group are that the accident rate is low but the severity rate is high. Also, the regression model which is developed to identify the accident Pattern or each seasonal group represents that the season-related factors, such as the amount of rainfall, the amount of snowfall, days of rainfall, days of snowfall etc. are strongly related to the accident pattern of evert seasonal group and among these factors the traffic volume, amount of rainfall. the amount of snowfall and days of freezing importantly affect the local accident Pattern. So, seasonal effect should be considered to the identification of high-risk road section. the development of descriptive and Predictive accident model, the resource allocation model of accident in order to make safety management plan efficient.