• Bulletin of Food Technology
• /
• v.26 no.3
• /
• pp.178-187
• /
• 2013

분자단계에서 천연소재 유래 다당체는 면역 세포 표면(예, 대식세포)에 있는 한가지 또는 여러가지 수용체(${\beta}$-glucan 수용체, mannose 수용체, complement 수용체 3, Toll-like 수용체, scavenger 수용체)와 면역 반응을 시작하기 위하여 결합할 수 있고, 그 후에 신호전달을 위하여 cytokine과 second messenger($Ca^{2+}$, cAMP, cGMP, NO 등등)들을 생성한다. 그 결과로 선천면역과 적응면역을 유도하여 다양한 질환에 영향을 미친다. 추가적으로 다당체들의 면역조절은 신경내분비 체계의 조절과도 연관되어 있다. 최근 수많은 천연소재유래 다당체의 생리활성에 관한 연구가 진행되고 있다. 다양한 연구를 통해 정확한 약효, 낮은 독성과 부작용을 가진 일단의 다당체가 발견되어 현재 임상에서 암 치료에도 사용되고 있다. 이러한 사실들은 면역증진 다당체들이 항 종양치료를 위한 새로운 치료제로서 큰 시장을 개척할 수 있다는 가능성을 보여주고 있다. 이러한 사실에도 불구하고 현재 다당체에 대한 연구는 다음과 같은 취약점을 내포하고 있다. 첫째 다당체의 생리활성에 대한 정해진 비교기준이 없다. 특별히 임상 환경에서는 이러한 연구들이 중국, 일본, 한국과 일부 다른 동양국가들에 국한되어 있어 유럽이나 미국에서의 연구 자료가 결여되어있다. 둘째 현재 연구에 사용되고 있는 대다수의 천연소재 유래 다당체는 순수한 다당체가 아닌 천연 그대로의 것을 사용하고 있어 소재로부터 유래하는 다른 활성성분에 의해 쉽게 영향을 받을 수 있어 순수 다당체가 면역체계에 어떠한 역할을 수행하는지 진단하는데 어려움이 있다. 셋째 면역조절 경로에서 다당체의 정확한 신호전달 경로가 아직 정확하게 밝혀지지 않았고, 또한 동물과 임상실험에서 다당체가 작용하는 수용체 및 신호전달 경로에 대한 상반되는 결과가 발표되고 있기도 하다. 따라서 다당체의 면역조절활성에 대한 연구에 있어 다음과 같은 점들에 주목해야 할 필요가 있다. 첫째 다당체의 구조와 활성간의 상관관계를 밝혀야 할 것이다. 특히 다당체의 세부 구조 및 활성 부위를 밝혀낸다면 분자수준의 면역조절 기작을 명확히 하는데 도움을 줄 수 있을 것이다. 이러한 정보를 확보할 수 있다면 다당체의 구조를 변형시켜 활성을 증진시킬 수 있을 것이며, 또한 활성이 증가된 다당체를 합성하는 일도 가능해 질 것으로 예상된다. 마지막으로 ${\beta}$-glucan과 lentinan과 같은 정제된 다당체의 연구를 지속적으로 수행하여 효과적인 동물실험 및 임상실험 protocol을 확보하고 연구결과들에 대한 database를 구축해야 할 필요가 있다. 이러한 노력들이 성공적으로 수행된다면 천연소재유래 다당체들이 가까운 장래에 암 치료를 포함한 다양한 질병에 적용 가능한 새로운 면역조절제로 사용될 수 있을 것이다.

• Journal of Yeungnam Medical Science
• /
• v.16 no.2
• /
• pp.193-199
• /
• 1999

Background: Measurement of body temperature is an important parameter in patient management in many clinical conditions. Failure to reach minimal acceptable body temperature standards has been associated with physiological derangements and has necessitated the application of additional therapy. The authors developed a new, simple, accurate thermometry system, which could be used to undertake precise temperature measurement for various clinical conditions. Materials and Methods: A new thermometry system using a specially designed temperature detecting and display system was developed. This system contains a temperature detecting sensor(LM 35CZ), which enables multiple serial checking of heat, data collection and processing computer, and 3-dimensional display system. It provides real time volumetric visualization of temperature distribution of a defined volume and stores and prints the data. Results: With this system, temperature can be measured at multiple interesting sites simultaneously, demonstrated as a 3-dimensional temperature distribution and stored. In well-controlled, systematic experiments a significant correlation has been observed between standard temperature and temperature using this system at various measuring points. Conclusion: This thermometry system is a real-time measurement system, which can demonstrate 3-dimensional heat distribution in experimental phantom and human body and can be used for diagnosing abnormal clinical conditions. In addition, this system reduces the nursing staff work load, providing them more time for long term care to patients.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.1020-1025
• /
• 2004

In previous paper, contaminations of food-borne pathogenic bacteria of Saengshik was found to occur during processing, because detection rates of food-borne pathogenic bacteria in final products were higher than those of raw materials. In this study, methods to reduce food-borne pathogenic bacteria and improved manufacturing process were developed for microbial safety of Saengshik. Food-borne pathogenic bacteria in raw materials were reduced to about 0.5-2.0 log cfu/g when seven kinds of raw materials were washed with electrolyzed water and ozonated water, but food-borne pathogenic bacteria could not be removed completely. After improvement of manufacturing process, numbers of food-borne pathogenic bacteria were same or decreased to levels of raw materials. Gaseous ozone and Biocon could control air-borne bacteria under $1{\times}10^1$ cfu/1000 L of air in pulverization and mixing rooms.

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.323-333
• /
• 2009

The Jincheonsagongnimaaeyeoraeipsang is a great stone relief Buddha in Goryeo Dynasty, transmitting sculptural styles of the Silla Kingdom. The Buddha was carved on the biotite granite basement, and was undergone cleaning treatment in 2007. The basement rock was opened in plenty cracks bringing out structural instability. And the top of the basement rock was colonized by trees obstructing sunshine and raising humidity. As a result of failure analysis, the basement rock of the Buddha had a major possibility of wedge failure in the parts of the face, hands and cloths. Therefore, the cracks were filled up with epoxy resin L-50, and titanium bars and wire ropes were applied to bind cracked rock blocks. The surface of the crack filler was colored by granite and talc powder with inorganic pigment and L-30. The crack meters were installed on the stone relief Buddha to monitor further behavior, lastly.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.261-268
• /
• 2019

Climate change and drought stress are having profound impacts on crop growth and development by altering crop physiological processes including photosynthetic activity. But finding a rapid, efficient, and non-destructive method for estimating environmental stress responses in the leaf and canopy is still a difficult issue for remote sensing research. We compared the relationships between photochemical reflectance index(PRI) and various optical and experimental indices on soybean drought stress under climate change conditions. Canopy photosynthesis trait, biomass change, chlorophyll fluorescence(Fv/Fm), stomatal conductance showed significant correlations with midday PRI value across the drought stress period under various climate conditions. In high temperature treatment, PRI were more sensitive to enhanced drought stress, demonstrating the negative effect of the high temperature on the drought stress. But high CO₂ concentration alleviated the midday depression of both photosynthesis and PRI. Although air temperature and CO₂ concentration could affect PRI interpretation and assessment of canopy radiation use efficiency(RUE), PRI was significantly correlated with canopy RUE both under climate change and drought stress conditions, indicating the applicability of PRI for tracking the drought stress responses in soybean. However, it is necessary to develop an integrated model for stress diagnosis using PRI at canopy level by minimizing the influence of physical and physiological factors on PRI and incorporating the effects of other vegetation indices.

• Korean Journal of Ecology and Environment
• /
• v.43 no.1
• /
• pp.11-18
• /
• 2010

The contamination of a suite of heavy metals were evaluated in water and sediments of urban stream, Tancheon down the stream. Tancheon is a urban stream which goes all the way across the urban area where various pollution sources are present. The sixteen study sites from seven different areas were designated down the stream. The heavy metal levels of the streams were detected in the order of Zn>Cu>Ni>Pb>Cd>Cr>Sb. There was a difference in the relative order of the concentration ranking in lake sediments. There is a trend that the heavy metal levels are higher at the sites where the construction causes inflow of soil particles to stream. Toxicity tests using pore-water in sediments were conducted for samples collected in some study sites, and pore-water in one site was proven to be toxic to Japanes medaka (Oryzias latipes). The reason may be the fecal pollution rather than heavy metal effect. Strong odor was detected in the sediment whose pore-water samples showed ecotoxicity. We did not observed the increasing concentration of heavy metals down to stream since the soil texture varied in the stream area of our study. Further study is needed to find quantitative relations between the level of contamination and its eco-effect.

• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.491-500
• /
• 2016

Fog is atmospheric in which tiny drops of water vapor are suspended in the air near the ground. Its form, occurrence, etc., change according to the temperature, relative humidity, wind and geographical features of the space around it. In particular, fog tends to occur near a source of water because of temperature and relative humidity difference. These days, climate change is increasingly affecting the occurrence of fog. Therefore the purpose of this study was to investigate how fog affects materials that are part of our cultural properties through outdoor exposure tests and artificial degradation. The degradation evaluation of materials as a function of fog occurrence frequency, showed that the color of metals changed noticeably, whereas dyed silk and Dancheong showed degradation on the surface and color differences but no particular tendencies. Therefore, damage prediction by color differences as a function of fog occurrence frequency was based on metal samples, which showed constant color differences. Through a comparison of the predictive value and color difference by outdoor exposure, the accuracy and applicability of the damage prediction formula was confirmed. If a more complex damage prediction formula is created, it is expected that prediction of the degree of material damage in the field would be possible.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.06a
• /
• pp.205-209
• /
• 2009

Recently, the increase of the size of GNP and the expansion of the foreign tour opportunities by the common 5 days work system in a week, reaction of the burden for visiting foreign countries, and expansion of airlines caused the rapid increase of overseas tour but slow increase in the number of foreign tourists, due to the price rise which might impact on the competitive power, and lack of tour infrastructure and attractiveness. As the wide area along the east coast of GyeongBuk Province has great amount of cultural, ocean and natural resources, it helps to get focused the tour industries and maximize the synergy effect through the mutual development coupling the resources and regions. On the basis of the potentials for the growth of east coast area to the international level and the development of local resources, a ocean tour and resort complex for four seasons, which has s strong connection to the local areas resulting the wide tour bond, could help to improve the local economy and balance the development of local province, and furthermore, jump to the level of the center in the East Coast area in the international society. Through the investigation and analysis of the ocean space development status and usage at the advanced foreign countries, the new meaning of the ocean space at the tour and resort complex would be proposed to the relevant local government in fit.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.177-187
• /
• 2019

Several volcanic activities have continued in Mt. Baekdu since the Millennium eruption, and these phenomena have increased the need for volcanic activity surveillance. Various geophysical approaches are needed to obtain the depth and size of magma chamber that lie several kilometers below the surface. We examined the applicability of direct-current resistivity survey in this study. In order to explore the deep magma chamber of Mt. Baekdu, which has a spatial limitation due to the borderline, a large-scale survey with a length of tens of kilometers should be conducted. This type of survey requires a distributed measurement system and optimized exploration designs. Therefore, we propose survey designs taking advantage of our developed distributed acquisition system and analyze the applicability using numerical simulation. We confirmed that our designs that use single survey line with offline transmitting points show comparable results to the conventional 3D survey. It is expected that our research result can contribute to the deep geophysical exploration in Mt. Baekdu.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.1-12
• /
• 2022

Generally, the plate load test and the field density test are conducted for compaction quality control in earthwork, and then additional analysis. Recently developed that the DCPT (Dynamic Cone Penetration Test) equipment for smart compaction quality control its the system are able to get location and real-time information about worker history management. The IoT-based the DCPT system improved the time-cost in the field compared traditional test, and the functions recording and storage of the DPI (Dynamic Cone Penetration Index) were automated. This paper describes using these DCPT equipment on in-situ and compared to the standards of the DCPT, and the compaction trend had be confirmed with DPI as the field test data. As a result, the DPI of the final compaction decreased by 1.4 times compared to the initial compaction, confirming the increase in the compaction strength of the subgrade compaction layer 10 to 14 cm deep from the surface. A trend of increasing compaction strength was observed. This showed a tendency to increase the compaction strength of the target DPI proposed by MnDOT and the results of the existing plate load test, but there was a difference in the increase rate. Therefore, additional studies are needed on domestic compaction materials and laboratory conditions for target DPI and correlation studies with the plate load tests. If this is reflected, it is suggested that DCPT will be widely used as smart construction equipment in earthworks.