• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.547-558
• /
• 2022

In August 2020, a debris flow occurred in Gokseon, Jeollanam-do, that resulted in the death of five residents. In this study area, high-resolution 0.03 m topographic information was generated through photogrammetry, and the amount of soil movement/loss was measured. In addition, sensitivity analysis was performed for flow depth, flow velocity, and debris flow area with the program Flo-2D using the difference in simulation parameter that discharge and topographic information. Wth increasing debris flow input discharge, increases were seen in flow depth, flow velocity, and debris flow area, as ell as in the gap in results from high-resolution topographic information and low-resolution topographic information. Also, when high-resolution topographic information was used, the results were similar to the actual (measured) flow direction of the debris flow. Therefore, the application of high-resolution topographic information increases the accuracy of the debris flow analysis results compared with low-resolution information. Results could be further imporved in the future by considering geological information such as yield stress and viscosity.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.255-262
• /
• 2012

Numerical simulations were performed to evaluate the dispersion characteristics of the pollutant around a Wolsung coastal area at located nuclear power plants. Numerical experiments by using EFDC(Environmental Fluid Dynamics Code) showed good agreements by comparison with the time series and harmonic analysis of the tidal elevations. The released pollutants moved in north direction at flood tide and in south direction at ebb tide. The calculated salinity and temperatures showed good agreements with the observed results by NFRDI(National Fisheries Research & Development Institute). The water circulation due to the variations of the temperature, salinity and tidal components were analyzed to estimate the dispersion characteristics of the pollutant.

• Journal of the Korean Magnetics Society
• /
• v.23 no.1
• /
• pp.26-30
• /
• 2013

This article is experimentally to investigate thermal-flow characteristics of the magnetic fluid for concentric annuli under externally fixed magnetic fields using visualization technique. Temperatures of the inner tube and outer tube in the tested concentric annuli were constantly maintained at both $30^{\circ}C$ and $25^{\circ}C$ and the middle tube was filled with the magnetic fluid. Magnetic field was uniformly applied using 4 permanent magnets at 4 directions of the concentric annuli. As a result, the thermal-flow characteristics of the magnetic fluid for concentric annuli could be controlled by directions of the external magnetic fields.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.2
• /
• pp.231-236
• /
• 1997

Observation for hot water spread has been carried out by such activites as sampling of water with ship, etc, until now It was required further to have new probe methodologies in such issues as simultaneity, great-spheric nature, and economics due to many hindering ele- ments such as spread speed of hot waste water, weather conditions, cost and expenses, scope and location determinations. However, it was believed that satellite could be utilized to monitor spread of water temperature and spread level in more quick and correct way than existing one, because it would be possible to supervise and detect marine environment within significantly short period if analyzed by means of satellite images. Therefore, this study is taken into account to flow and spread conditions of hot waste water, survey of water temperature, by means of satellite images.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.235-239
• /
• 2011

도시지역은 수자원 공급의 문제를 해결하기 위해서 많은 노력이 이루어지고 있으나 최근 기상 이변과 같은 문제점들로 인하여 용수 공급이 안정적이지 못한 실정이다. 기후적 영향을 적게 받는 지하수의 경우는 비교적 지속적이고 안정적인 수자원으로 많이 이용되고 있으나 이 또한 관리적인 측면의 여러 가지 문제점으로 인하여 어려움을 겪고 있다. 특히 도시지역은 지하수이용량이 많아 지하수개발에 대한 명확한 체계가 이루어지지 않으면 과잉양수로 인한 지하수위 저하로 용수부족, 지하수질 악화 등과 같은 지하수 재해를 일으킬 수 있으며 해안지역일 경우 해수침투로 인하여 그 피해가 광범위하고 장기간으로 확산될 수 있다. 따라서 지하수의 개발 및 관리를 위해서는 지하수 유동에 대한 분석이 이루어져야 효율적인 지하수 이용이 가능하다. 도시지역 지하수 유동의 경우 지하수함양과 지하수유출뿐만 아니라 지속적으로 변화하는 요소들인 지하수이용량, 상하수도 누수량, 지하철로 인한 유출량 등과 같은 도시화 요소들도 고려하여야 한다. 그러나 이러한 요소들을 명확하게 규명하는 것은 매우 어렵다. 지하수자원의 개발 이용 및 관리가 가장 절실히 필요한 곳이 도시지역이라는 점을 감안하면 지하수 유동 분석에 관한 연구는 반드시 필요하며 수문계측 기술의 향상과 관련 분야에 대한 지속적인 연구들도 함께 이루어져서 해석의 정확도가 높아져야만 원활한 수자원 공급과 효율적인 체계 관리가 가능할 것이다. 본 연구에서는 도시지역의 지하수유동특성을 살펴보기 위하여 부산광역시 수영구를 대상으로 도시화 요소를 고려한 지하수 모델링을 통하여 지하수 유동을 분석하였다. 정상상태 지하수 유동 모의를 실시한 결과 지하수위는 산지가 분포하고 있는 북서쪽으로 갈수 록 높아지고 수영강과 남해쪽으로 갈수록 낮아지며 지하수 유동도 내륙에서 수영강 및 남해로 유출되고 있는 모습을 나타내었다. 도시화 요소를 고려한 비정상상태 지하수 유동 모의 결과 수영강 및 남해에서 내륙으로 지하수가 유입되는 형태를 나타내고 있었다. 지하수위 또한 내륙으로 갈수록 낮아지는 형상을 나타내고 있었으며 대량의 양수량의 관정이 위치하는 수영로타리 일대와 광안동 지역, 지하철유출량이 많은 망미역 부근, 전력구 터널 공사로 인한 지하수 유출량이 있는 일부지역에서는 급격하게 지하수위가 낮아지는 것을 알 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.2
• /
• pp.118-131
• /
• 1991

The effects of free surface on vortex shedding phenomena around a bluff body were studied by both numerical simulation and flow visualization experiments. A vortex method, which approximates the vorticity field as the sum of discrete vortices; was used for the numerical simulation. Flow visualization experiments were performed in the KRISO cavitation tunnel. Hydrogen bubble was used as illumination material. Free surface elevation was also measured during experiments. The hydrodynamic drag and lift were predicted by numerical simulation. The predicted period of vortex shedding was compared with the results of experiments.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.528-536
• /
• 1987

In a turbulent free shear flow, the large scale motion is characterized by the intermittent flow which arises from the interaction between the turbulent fluid and the irrotational fluid of the environment through the mean velocity gradient. This large scale motion causes a bulk convection whose effect is similar to the spatial diffusion process. In this paper, the total diffusion process is proposed to be approximated by weighted sum of the bulk convection due to the large scale motion and the usual gradient diffusion due to small scale motion. The diffusion term in conventional .kappa.-.epsilon. model requires on more equation of the intermittency transport equation. A production term of this equation means mass entrainment from the irrotational fluid to the turbulent one. In order to test the validity of the proposed model, a plane jet is predicted by this method. Numerical results of this model is found to yield better agreement with experiment than the standard .kappa.-.epsilon. model and Byggstoyl & Kollmann's model(1986). Present hybrid diffusion model requires further tests for the check of universality of model and for the model constant fix.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.9
• /
• pp.1163-1171
• /
• 1999

Superdiffusive transport motions of passive scalars are numerically considered for various advection velocity fields. Calculated exponents ${\alpha}$ in the superdiffusion-defining relation ${\sigma}^2(t){\sim}t^{\alpha}$ for model flow fields agree to the theoretically predicted values. Simulation results show that the superdiffusion takes place as the tracers' motion become less random, compared to their motion at the pure molecular diffusion. Whether the flow field is random or not, degrees of superdiffusion are directly related to the velocity autocorrelation functions along the tracers Lagrangian trajectories that characterize degrees of randomness of the tracers' motion.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.1
• /
• pp.47-55
• /
• 2004

A SS prediction system using GUI in coastal region has been developed to predict the dispersion of the suspended sediments occurred by dredging. The prediction system uses a finite element hydrodynamic model to calculate water level and velocities and a random-walk particle tracking model to simulate SS dispersion. The system was applied to hindcast the tidal currents and SS concentrations in the Kunsan coastal waters. The simulated tidal currents showed good agreements with the observed currents. The transport model was verified for analytic solutions and field observation showing good agreements.

• Journal of the KSME
• /
• v.53 no.1
• /
• pp.47-50
• /
• 2013

장비산업은 다품종 소량 생산 및 수주 개발의 특성으로 인하여 제품의 경쟁력을 개발 초기에 확보하기 위한 디지털 개발 프로세스의 도입이 필수적이며 이를 위해서는 형상 설계, 구조/유동해석, 제어 설계 등 구성 요소의 기능만큼이나 기능간의 연계가 중요하다. 디지털 개발의 확산을 위해서는 단위 요소의 개발과 더불어 이종 SW 개발자 간의 공동 개발을 통해 실 사용자의 요구를 반영한 통합 솔류션의 제공이 필요하다.