• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.172-173
• /
• 2000

TiN 박막은 부착력이 좋은 기계적 성질을 갖고 있으며 화학적 안정성이 뛰어난 장점을 갖고 있어 수명이 긴 박막으로 사용 할 수 있다. 또한 반도체 집적 회로소자에서는 Al과 Si 사이의 확산 방지막으로 널리 사용하고 있으며, 티타늄과 질소의 화학 조성비를 적절히 조절하여 노란 금빛을 띠는 TiN 박막을 시계나 장신구 등의 표면에 코팅하여 장식에도 많이 사용하고 있다$^{[1]}$ . 최근에는 얇은 전도성 TiN 박막을 사용하여 무반사 영역을 넓히고, 무정전 효과를 지니며, TiN 박막의 두께를 변화시켜 투과율을 조절하여 명도대비(contrast)를 향상시킬 수 있는 2층 무반사 무정전 박막을 연구하고 있다.$^{[2]}$ 여기서는 티타늄과 질소의 원소조성비에 따른 TiN 박막의 복소수 굴절률의 분산이 단 2층으로 넓은 가시광선 영역에서 무반사 효과를 가질 수 있도록 TiN 박막을 증착해야 한다. (중략)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.544-545
• /
• 2012

• Journal of the Korean Chemical Society
• /
• v.36 no.6
• /
• pp.958-962
• /
• 1992

• Journal of the Korean Institute of Educational Facilities
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2013

The present study examines the effects of periodic type diffusers for producing the preferred acoustics for speech and determines the more successful configurations of sound-absorbing and diffusing treatments for achieving good acoustics in classrooms. The measurements were carried out in a 1/10 scale model classroom systematically adding diffusers to one or more of four surfaces of the room. A total of 13 combination of diffusers with absorptive treatments were investigated. Adding diffusers on the ceiling were more effective to increasing the early-arriving reflection energy($G_{50}$) than adding absorptive materials on the entire ceiling. The late arriving reflection energy($G_{late}$) was decreased with increasing amounts of diffusing treatments of upper front or rear wall and this resulted in achieving higher early-to-late ratios($G_{50}$). Adding diffusers on the upper front wall($AC_{100}DUFW_{26}$) achieved more uniform acoustical conditions over the receiver positions than adding diffusers on the upper rear wall($AC_{100}DUFW_{26}$). Adding diffusers on the ceiling and absorptive materials on the lower front wall($AC_{75}DC_{25}ALFW_{26}$) achieved better acoustical conditions than adding the absorptive materials on the entire ceiling and lower front wall($AC_{100}ALFW_{26}$).

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.331.2-336
• /
• 1998

In this paper, the validity for the application of the diffuse sound field theoty to the real sound field, especially on the bounding surfaces of the rooms, was reconsidered. The analytical result for directivity pattern on the bounding surfaces of the room was compared with the result of numerical simulations using ray tracing technique. Comparison results show that the distribution of the incident sound energy vs incident angles is approximated to Gaussian distribution, not to the uniform distribution.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.54.2-54.2
• /
• 2009

결정질 실리콘 태양전지의 알루미늄 후면전극이 패시베이션층의 공극을 통하여 확산됨으로써 국부 후면전계(local back surface field)가 형성되는 후면 점접촉 구조를 제조하였으며, 이에 대한 공정조건 및 특성을 연구하였다. 후면 패시베이션층은 실리콘 기판과 금속전극사이에 삽입됨으로써 표면 재결합속도를 낮추고, 후면 반사도를 높여 광흡수 경로를 증가시킬 수 있다. 고가의 사진식각기술 대신에 저가의 단순한 공정인 레이저 식각기술을 사용하여 후면 패시베이션층에 균일하고 잘 정렬된 공극 패턴을 형성할 수 있었다. 레이저 식각 조건 및 소성조건에 따른 Al 확산 국부 후면전계의 단면 형상을 주사전자현미경(SEM)을 사용하여 관찰하였으며 이에 대한 전기적, 광학적 특성 변화를 조사하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.218.1-218.1
• /
• 2013

GeSbTe 삼원계 칼코겐화물 합금은 광디스크 및 상변화 메모리에서 활성물질로 사용되는 대표적인 재료이다. GeSbTe 합금은 결정질 상과 비정질 상의 두 종류의 상을 갖는데 그 상에 따라 반사율 및 전기저항이 서로 다르기 때문에 활성물질로서 작용한다. GeSbTe 합금 구성원소의 일부를 포함하는 두 종류의 물질로 접합을 형성하고 열처리 공정을 수행함으로써 GeSbTe 합금을 국부적으로 생성하는 방법이 최근에 보고되었다. 이러한 방법을 상변화 메모리 소자 제조에 이용하면 GeSbTe 합금을 제한된 영역에 나노 스케일로 만드는 것이 가능해져서 GeSbTe 합금의 상변화를 유도하는데 필요한 프로그래밍 전류를 낮추는 효과를 얻을 수 있다. 상변화 메모리 소자 내에서의 GeSbTe 합금의 두께 또는 크기는 상변화 메모리 소자의 동작 특성을 좌우하는 중요한 파라미터이며 이것은 열처리 공정 조건에 따라 결정되므로 열처리 공정 조건에 따라 GeSbTe 합금이 생성되는 양상이 어떻게 변화하는지를 밝힐 필요가 있다. 따라서 본 연구에서는 다양한 열처리 온도 조건에서 Ge-Sb-Te 삼성 분계에서의 구성 원소들의 상호확산 거동을 조사하였다. 순수한 Ge 박막과 조성이 다른 SbTe 박막의 접합을 형성하고 773K까지의 온도 범위에서 열처리를 실시하였다. Auger 수직 분석을 이용하여 Ge, Sb, 및 Te 원소의 깊이 방향의 확산 정도를 조사하였으며 그 결과로서 열처리 온도가 증가함에 따라 상호확산 정도가 심해지고 Te 원소가 상호확산에 있어서 중요한 역할을 한다는 사실을 확인하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.12
• /
• pp.835-839
• /
• 2012

In recent decades, a lot of noise barriers have been installed along paved road in order to reduce the road induced noise, which increases as traffic volume grows. For better range of sight, transparent noise barriers are widely installed despite of reflecting noise. In this study, the effect of surface shape and pattern of noise barriers on the reduction of reflecting noise was analyzed to maximize the noise reduction. According to the number of shape and pattern, it was observed that there were noise reduction effect as of 0.9~1.5 dB(A). It was found that the spatial field where the noise concentrates or disperses changes according to the width of blocks on the barriers as well. It suggests that there might be possibility of surface shape modification to optimize the noise reduction technology.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.494-510
• /
• 2019

Underwater acoustic communication channel parameters consist of impulse response, delay spreading, scattering function, coherence bandwidth, frequency selective fading, coherence time and time variant magnitude fading statistics on which communication system modem and channel coding are designed. These parameters are influenced by sound velocity profile, platform motion and sea surface roughness in given acoustical oceanography condition. In this paper, channel model based on phasor, channel simulator, measurement and analysis method of channel parameters are given in a fixed source-to-receiver system and the parameters are analyzed using shallow water experimental data. For two different source-to-receiver ranges of 300 m and 600 m, the parameters are characterized by three multipaths such as a direct, a surface reflection path with time variant scattering and a bottom reflection path. The results present a channel modelling method of a fixed source source-to-receiver system, channel parameters measurement and analysis methods and a system design and performance assessment method in shallow water.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.221-228
• /
• 2014

The color and shape of the tongue reflect the physiological and clinico-pathological condition of the body. Recently, various tongue image acquisition devices have been developed for accurate diagnosis based on quantitative and objective tongue features. Since a color information is essential for tongue diagnosis, the performance of an illuminator is very important for the tongue image acquisition device. In this study, we developed an indirect illumination, which is possible to improve a homogeneity of light intensities on the tongue surface, and evaluated its performances. In order to realize the indirect illumination (II), a semi-ellipsoidal solid structure (SESS) for the light reflex was located in the system, and two high-brightness white LEDs were placed for illuminating the areas under frontal camera in the SESS. The tongue surface was illuminated by reflected light from the SESS. The light homogeneity induced by three different illuminations including the II was evaluated by calculating coefficient of variation (CV) of illuminance of five regions. The II showed less than 0.01 of CV and the direct illumination (DI) and the direct illumination with a light diffusion plate (DILDP) showed 0.16 and 0.13, respectively. The reflexed pixel ratios of tongue phantom images show 5.76%, 4.22%, 1.79% for the DI, the DILDP and the II, respectively. The homogeneity of a tongue phantom was evaluated by calculating CV of mean pixel values of six different tongue regions, and showed less than 0.06 in the II. If the II technique apply to tongue diagnosis system, it is expected to improve diagnostic accuracy in clinic.