• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.107-120
• /
• 2011

Several MODIS AQUA products have been compared with shipboard data to assess the possibility of using remote sensing to estimate particulate organic carbon (POC) concentration in the surface waters of the East Sea. A total of 30 POC profiles obtained in spring and summer seasons of the years of 2006~2010 were compared with remote sensing reflectance at various wavelengths and diffuse attenuation coefficient at 490 nm observed by MODIS AQUA. The algorithm thus established was $POC=266.85^*[R_{rs}(488)/R_{rs}(555)]^{-1.447}$ ($R^2=0.924$) with root mean square error of 20.9 mg $m^{-3}$. Remotely sensed POC contents derived using our algorithm appeared also not to be affected by the presence of non-POC component in suspended particulate matter. Therefore this algorithm could be applied to obtain POC concentration over the East Sea using MODIS Aqua observation.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.638-648
• /
• 2020

Currently, the method of user-follwoing in intelligent cooperative robots usually based in vision system and using Lidar is common and have excellent performance. But in the closed space of Corona 19, which spread worldwide in 2020, robots for cooperation with medical staff were insignificant. This is because Medical staff are all wearing protective clothing to prevent virus infection, which is not easy to apply with existing research techniques. Therefore, in order to solve these problems in this paper, the ultrasonic sensor is separated from the transmitting and receiving parts, and based on this, this paper propose that estimating the user's position and can actively follow and cooperate with people. However, the ultrasonic sensors were partially applied by improving the Median filter in order to reduce the error caused by the short circuit in communication between hard reflection and the number of light reflections, and the operation technology was improved by applying the curvature trajectory for smooth operation in a small area. Median filter reduced the error of degree and distance by 70%, vehicle running stability was verified through the training course such as 'S' and '8' in the result.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.3
• /
• pp.42-51
• /
• 1981

Boron was predeposited into p (100) Si wafer at 94$0^{\circ}C$ for 60minutes to make the back surface field. High tempreature diffusion process at 1145$^{\circ}C$ for 3 hours was immediately followed without removing boron glass to obtain high surface concentration Back boron was annealed at 110$0^{\circ}C$ for 40minutes after boron glass was removed. N+ layer was formed by predepositing with POCI3 source at 90$0^{\circ}C$ for 7~15 minutes and annealed at 80$0^{\circ}C$ for 60min1es under dry Of ambient. The triple metal layers were made by evaporating Ti, Pd, Ag in that order onto front and back of diffused wafer to form the front grid and back electrode respectively. Silver was electroplated on front and back to increase the metal thickness form 1~2$\mu$m to 3~4$\mu$m and the metal electrodes are alloyed in N2 /H2 ambient at 55$0^{\circ}C$ and followed by silicon nitride antireflection film deposition process. Under artificial illumination of 100mW/$\textrm{cm}^2$ fabricated N+PP+ cells showed typically the open circuit voltage of 0.59V and short circuit current of 103 mA with fill factor of 0.80 from the whole cell area of 3.36$\textrm{cm}^2$. These numbers can be used to get the actual total area(active area) conversion efficiency of 14.4%(16.2%) which has been improved from the provious N+P cell with 11% total area efficiency by adding P+ back.

• Korean Security Journal
• /
• no.31
• /
• pp.125-155
• /
• 2012

Terrorist organization has shown the trend of secret organization and it is harder to cope with terrorism because of uncertainty of terrorism. Homegrown terrorism is the one, whose preparation, execution and effect are restricted to domestic area. By the way, in the worldwide economic depression, violence and radical demonstration have shown the expansion trends as in Middle East, political revolution of Africa, anti-social resistance of Europe and Wall Street Occupation of USA. Homegrown terrorism is occurring in various countries such as UK and Spain as well as USA. Specialists warn homegrown terrorism in Korea. The purpose of this study was to prospect the possibility of homegrown terrorism that can be generated in the transfer to multi-culture society as various foreigners come to Korea rapidly and suggest the method to cope with the trend. The study analyzed environment and analysis of homegrown terrorism that Korea faces now. The methods to cope with homegrown terrorism are as follows. First, distribution of radical homegrown terrorism via internet should be prevented. Second, the connection between terrorist organization and homegrown terrorist should be prevented. Third, there should be a cooperation among government, residents and religious group. Fourth, there should be an open approach against multi-culture society. Fifth, there should be a systematic control for cause of new conflict. Finally, there should be a long-term approach to cause of new conflict. If we do not make an effort to prevent homegrown terrorism, terrorism environment may face new aspect and national and social cost for it will increase.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.83-83
• /
• 2012

금속 실리사이드는 낮은 비저항, 실리콘과의 좋은 호환성 등으로 배선 contact 물질로 널리 연구되고 있다. 특히 $CoSi_2$는 선폭의 축소와 관계없이 일정하고 낮은 비저항과 열적 안정성이 우수한 특성 등으로 배선 contact 물질로 활발히 연구되고 있다. 금속 실리사이드를 실리콘 평면기판에 형성시키는 방법으로는 열처리를 통한 금속박막과 실리콘 기판 사이에 확산작용을 이용한 SALICIDE (self-algined silicide) 기술이 대표적이며 CoSi2도 이와 같은 방법으로 형성할 수 있다. Co 박막을 증착하는 방법에는 물리적 기상증착법 (PVD)과 유기금속 화학 증착법 등이 보고되어있지만 최근 급격하게 진행 중인 소자구조의 나노화 및 고 단차화에 따라 기존의 증착 기술은 낮은 단차 피복성으로 인하여 한계에 부딪힐 것으로 예상되고 있다. ALD(atomic layer deposition)는 뛰어난 단차 피복성을 가지고 원자단위 두께조절이 용이하여 나노 영역에서의 증착 방법으로 지대한 관심을 받고 있다. 앞선 연구에서 본 연구진은 CoCp2 전구체과 $NH_3$ plasma를 사용하여 Plasma enhanced ALD (PE-ALD)를 이용한 고 순도 저 저항 Co 박막 증착 공정을 개발 하고 이를 SALICIDE 공정에 적용하여 $CoSi_2$ 형성 연구를 보고한 바 있다. 하지만 이 연구에서 PE-ALD Co 박막은 플라즈마 고유의 성질로 인하여 단차 피복성의 한계를 보였다. 이번 연구에서 본 연구진은 Co(AMD)2 전구체와 $NH_3$, $H_2$, $NH_3$ plasma를 반응 기체로 사용하여 Thermal ALD(Th-ALD) Co 및 PE-ALD Co 박막을 증착 하였다. 고 단차 Co 박막의 증착을 위하여 Th-ALD 공정에 초점을 맞추어 Co 박막의 특성을 분석하였으며, Th-ALD 및 PE-ALD 공정으로 증착된 Co 박막의 단차를 비교하였다. 연구 결과 Th-ALD Co 박막은 95% 이상의 높은 단차 피복성을 가져 PE-ALD Co 박막의 단차 피복성에 비해 크게 향상되었음을 확인하였다. 추가적으로, Th-ALD Co 박막에 고 단차 박막의 증착이 가능한 Th-ALD Ru을 capping layer로 이용하여 CoSi2 형성을 확인하였고, 기존의 PVD Ti capping layer와 비교하였다. 이번 연구에서 Co 박막 및 $CoSi_2$ 의 특성 분석을 위하여 X선 반사율 분석법 (XRR), X선 광전자 분광법 (XPS), X선 회절 분석법 (XRD), 주사 전자 현미경 (SEM), 주사 투과 전자 현미경 (STEM) 등을 사용하였다.

• Journal of Sensor Science and Technology
• /
• v.8 no.3
• /
• pp.283-290
• /
• 1999

The $n^+/p/p^+$ junction PERL solar cell of $0.1{\sim}2{\Omega}{\cdot}cm$ (100) p type silicon wafer was fabricated through the following steps; that is, wafer cutting, inverted pyramidally textured surfaces etching by KOH, phosphorus and boron diffusion, anti-reflection coating, grid formation and contact annealing. At this time, the optical characteristics of device surface and the efficiency of doping concentration for resistivity were investigated. And diffusion depth and doping concentration for n+ doping were simulated by silvaco program. Then their results were compared with measured results. Under the illumination of AM (air mass)1.5, $100\;mW/cm^2$ $I_{sc}$, $V_{oc}$, fill factor and the conversion efficiency were 43mA, 0.6 V, 0.62. and 16% respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6227-6235
• /
• 2015

The HUD has recently been downsized due to the development of micro display and LED technology as a see through information display device, gradually expands the application areas. In this paper, using a DLP micro display device designed a compact head-up display(HUD) optical system for biocular observation of the image exhibition area 5 inches. It was analyzed for each design element of the optical system in order to design a compacted HUD. DLP, projection optical system and concave image combiner were discussed the design approach and the characteristics. Through a connection structure analysis of each optical system, detailed design specifications were set up and designed the optical system in detail. Put a folded configuration in the form of a white diffuse reflector between the projection lens and concave image combiner was designed to be independent, respectively. Distance of the projected image is adjustable up to approximately 2m ~ infinity and observation distance is 1m. Resolution could be recognized by 1 ~ 2pixels in HD($1,280{\times}720pixels$) class, various characters and symbols could be read. In addition, color navigation map, daytime video camera and thermal imaging cameras can be displayed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.176-182
• /
• 2009

Other damage can occur due to the preexisting dull structure and installation of nonenvironmental-friendly concrete structure, lack of function for preventing coastal erosion. Increase of personal income and fast spread of the concept of waterfront casued the initiation of many project to improve aging coastal ports. However, none of environment-friendly structure has been developed and pre-existing solid block, igloo block, tunnel block are used commonly. In piers and lighter's wharf where the ships are mooring, resonance by the generation of a reflected wave caused by penetration wave in the port and port wave increases wave heights in the port and makes difficult to maintain the temperature, causes problems in mooring ships and cargo-working, and eventually increase the occurance of damages of the small ships by the collision. Therefore, development of new types of blcok is necessary. To apply Coastal Environments block developed for this reason, it requires allowable bearing capacity evaluation of shear key. For this study, we made test specimen for connecting part of C.E. Block, and conducted friction test of boundary surface. Data obtained by the experiment was analyzed by finite element analysis and assessed the coefficient of friction between C.E. Block and boundary surface.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1837-1846
• /
• 2022

The annual increase in chemical accidents is causing damage to life and the environment due to the spread and residual of substances. Environmental damage investigation is more difficult to determine the geographical scope and timing than human damage investigation. Considering the reality that there is a lack of professional investigation personnel, it is urgent to develop an efficient quantitative evaluation method. In order to improve this situation, this paper conducted a chemical accidents investigation using unmanned aerial vehicles(UAV) equipped with various sensors. The damaged area was calculated by Ortho-image and strength of agreement was calculated using the normalized difference vegetation index image. As a result, the Cohen's Kappa coefficient was 0.649 (threshold 0.7). However, there is a limitation in that analysis has been performed based on the pixel of the normalized difference vegetation index. Therefore, there is a need for a chemical accident investigation plan that overcomes the limitations.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1541-1551
• /
• 2023

Radiometric calibration is a fundamental step in ocean color remote sensing since the step to derive solar radiance spectrum in visible to near-infrared wavelengths from the sensor-observed electromagnetic signals. Generally, satellite sensor suffers from degradation over the mission period, which results in biases/uncertainties in radiometric calibration and the final ocean products such as water-leaving radiance, chlorophyll-a concentration, and colored dissolved organic matter. Therefore, the importance of radiometric calibration for the continuity of ocean color satellites has been emphasized internationally. This study introduces an approach to improve the radiometric calibration algorithm for the visible bands of the Geostationary Ocean Color Imager-II (GOCI-II) satellite with a focus on stability. Solar Diffuser (SD) measurements were employed as an on-orbit radiometric calibration reference, to obtain the continuous monitoring of absolute gain values. Time series analysis of GOCI-II absolute gains revealed seasonal variations depending on the azimuth angle, as well as long-term trends by possible sensor degradation effects. To resolve the complexities in gain variability, an azimuth angle correction model was developed to eliminate seasonal periodicity, and a sensor degradation correction model was applied to estimate nonlinear trends in the absolute gain parameters. The results demonstrate the effects of the azimuth angle correction and sensor degradation correction model on the spectrum of Top of Atmosphere (TOA) radiance, confirming the capability for improving the long-term stability of GOCI-II data.