• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.83-91
• /
• 2015

With varying conditions of concrete surface, induced chloride contents are changed and this is a key parameter for steel corrosion and service life in RC (Reinforced Concrete) structures. Many surface enhancement techniques using impregnation have been developed, however the evaluation techniques for chloride behavior through doubly layered media and time-dependent diffusion are rarely proposed. This paper presents an analysis technique considering double-layer concrete and time-dependent diffusion behavior, and the results are compared with those from the previous test results through reverse analysis. The chloride profiles from the surface-impregnated concrete exposed to atmospheric, tidal, submerged zone for 2 years are adopted. Furthermore surface chloride contents and diffusion coefficients are obtained, and are compared with those from Life365. Through consideration of time effect, the relative error decreases from 0.28 to 0.20 in atmospheric, 0.29 to 0.11 in tidal, and 0.54 to 0.40 in submerged zone, respectively, which shows more reasonable results. Utilizing the diffusion coefficients from Life365, relative errors increases and it needs deeper penetration depth (e) and lower diffusion coefficient ratio ($D_1/D_2$) due to higher diffusion coefficient.

• Journal of Wetlands Research
• /
• v.6 no.2
• /
• pp.65-71
• /
• 2004

The most significant effect of excess water in wetlands is the isolation of the soil from the atmosphere and the prevention of O2 from diffusing into soil. The blockage of atmospheric O2 induces biological and chemical processes that change soil from oxidized into reduced state. When dry soil develop into hydric soil, redox potential is dropping. The redox potential is a indicator of hydric soil and affect chemical function of wetlands. To reveal characteristics of wetland soil, redox potential was measured in Jinkwannaedong ecological conservation area from May in 2003 to March in 2004. Redox potentials in May ranged from 5 mV at 25 cm depth to 200 mV at 10 cm depth. It decreased to about -200 m V at all depths and continued until October. In winter, redox potential was slowly increased; it was the highest at 5 cm depth and lowest at 20 cm depth. Annual variations of redox potential in 20 cm depth showed the same pattern at 5 sites; low in growing season and high in non-growing season. This results indicates that soils of study sites are in hydric state and methanogenesis is occurring in Jinkwannaedong ecological conservation area.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.772-779
• /
• 2012

For improving performance of conical air diffuser generating fine bubble, both experimental and numerical simulation method were used. After adapting diffusers inner real scale bubble column, suitable for various diffuser submergence, the effect of diffuser submergence on oxygen transfer performance such as Oxygen Transfer Coefficient ($K_{L}a_{20}$) and Standard Oxygen Transfer Efficiency (SOTE) was investigated empirically. As flow patterns for various diffuser number and submergence were revealed throughout hydrodynamic simulation for 2-phase fluid flow of air-water, the cause of the change for oxygen transfer performance was cleared up. As results of experimental performance, $K_{L}a_{20}$ was increased slightly by 7% and SOTE was increased drastically by 39~72%, 5.6% per meter. As results of numerical analysis, air volume fraction, air and water velocity in bioreactor were increased with analogous flow tendency by increasing diffuser number. As diffuser submergence increased, air volume fraction, air and water velocity were decreased slightly. Because circulative co-flow is determinant factor for bubble diffusion and rising velocity, excessive circulation intensity can result to worsen oxygen transfer by shortening bubble retention time and amount.

• Korean Journal of Cognitive Science
• /
• v.10 no.3
• /
• pp.67-75
• /
• 1999

We investigated whether human could perceive the heading direction from the optic flow made from random dots and real images simulating the motion of the observer and objects. When an object moves across the focus of expansion(FOE) in random dot simulation. the observer perceived the focus of expansion biased toward the motion direction of the object. supporting the hypothesis that the direction repulsion is produced between the expansional and the horizontal planar motion components. With real image display observers tended to perceive one's heading direction biased toward the c center of the scene regardless of the direction and position of moving 0bcts. And it was observed that the deeper the depth of the background was the larger the judgment error was. These results suggest it is more likely that human depends on different cues than the optic flow when they perceive or judge one's heading direction in the real environment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.505-513
• /
• 2010

The tribrachial flame has attracted interest as a basic structure of the flame edge. This flame structure helps understand stabilization of laminar flames and re-ignition of turbulent flames. A number of analytical and experimental studies have been carried out on the tribrachial flame. However, the effect of the variation of the flammability limits on the structure of the tribrachial flame has not been studied in detail. In this study, the effect of non-symmetric flammability limits on the flame structure was investigated by adopting a simple numerical scheme based on several laminar flame theories. A fixed velocity field was considered and boundary matching algorithm was used on the premixed branch. The variation of the diffusion branches under the non-symmetric flammability limits and heat loss was investigated. The formation and extinction of the diffusion branch behind the premixed branch were successfully described. This basic study can help understand the fundamental structure of the flame and can form the basis of subsequent detailed studies.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.548-555
• /
• 2015

This paper aims to estimate the service life of the target bridge structures subjected to chloride ingress from de-icer, which is used for safety of vehicles in winter, by investigating the chloride ingress into concrete. In this study, the 10-year-old bridge structures were investigated by measuring the chloride along the depth from the exposed surface to derive the surface chloride concentration and the diffusion coefficient for the prediction of service life. The service life of each measured point on the structures were estimated with the surface chloride concentration and the diffusion coefficient by using Life-365 software. As a result, it was estimated for all measured points to have over 100-year service life. Furthermore, the diffusion coefficient and the service life from the measured data were compared to another method calculated with the concrete mix, considering the time dependency of diffusion coefficient.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.3
• /
• pp.233-240
• /
• 1995

A large part of shoaling of navigation channel surrounded by fine sand is caused by suspended sediment in non-equilibrium state. We develop a numerical model for predicting shoaling of navigation channel where concentration of suspended sediment in such state is accurately simulated. In this study, effects of channel geometry on the shoaling of the channel are investigated numerically. A composite slope of navigation channel is also proposed to reduce non-equilibrium property of suspended sediment. It is found that the composite slope can effectively reduce non-equilibrium property of suspended sediment and the amount of sediment deposited in the main channel.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.67-72
• /
• 2003

제주도 동부지역에 설치한 심부관측정과 지하수 개발공에 대한 시추코아 지질검층, EC 및 수온검층, 지하수위 관측, 수질조사 등의 자료를 기초로 이 지역의 지하지질 분포와 지하수 부존특성에 대해 해석을 실시하였다. 제주도 동부 해발 200m 이하지역은 평균 해수면 하 90~120m 깊이까지 투수성이 좋은 용암류 누층으로 이뤄져 있으며, 일부지역에서는 서귀포층 상부에 유리쇄 설성 각력암층(hyaloclastite breccia)이 두껍게 분포하고 있어 담수지하수의 확산과 해수의 유입이 잘 일어날 수 있는 지질상태를 이루고 있다. 특히 서귀포층은 G-H비에 의한 담.염수 경계면 분포 깊이보다 깊은 위치에 존재하고 있어 제주도 서부지역에서처럼 담수지하수를 저류 해주는 역할을 기대하기 어려운 것으로 판단된다. 제주도 동부지역 지하수체는 수직적으로 담수지하수, 저염지하수, 염수지하수로 구분할 수 있으며, Ghyben-Herzberg 원리가 적용되는 담수렌즈(기저지하수) 두께는 일반적인 G-H비 보다 훨씬 얇은 평균 1:20의 비율을 나타냈다. 담수렌즈는 대체로 해안으로부터 내륙쪽 8km 지역까지 광범위하게 발달하고 있으며, 담수렌즈 포장량은 822백만톤(공극율 5%)에서 1,970백만톤(공극율 12%)의 범위로 추정되었다.

• Journal of Biomedical Engineering Research
• /
• v.22 no.2
• /
• pp.145-150
• /
• 2001

대뇌 피질에 삽입하여 깊이에 따라 신경 신호를 기록하기 위한 탐침형 반도체 미세전극 어레이(depth-type silicon microelectrode array, 일명 SNU probe)를 제작하였다. 붕소를 확산시켜 생성된 고농도 p-type doping된 p＋ 영역을 습식식각 정지점으로 사용하는 기존의 방법과 달리 실리콘 웨이퍼의 앞면을 건식식각하여 원하는 탐침 두께만큼의 깊이로 트렌치(trench)를 형성한 후 뒷면을 습식식각하는 방법으로 탐침 형태의 미세 구조를 만들었다. 제작된 반도체 미세전극 어레이의 탐침 두께는 30 $\mu\textrm{m}$이며 실리콘 건식식각을 위한 마스크로 6 $\mu\textrm{m}$ 두께의 LTO(low temperature oxide)를 사용하였다. 탐침의 두께는 개발된 본 공정을 이용해서 5~90 $\mu\textrm{m}$ 범위까지 쉽게 조절할 수 있었다. 탐침의 두께를 보다 쉽게 조절할 수 있게 됨에 따라 여러 신경조직에 필요한 다양한 구조의 반도체 미세전극 어레이를 개발할 수 있게 되었다. 본 공정을 이용해서 개발된 4채널 SUN probe를 사용하여 흰쥐의 제1차 체감각 피질에서 4채널 신경 신호를 동시에 기록하였으며, 전기적 특성검사에서 기존의 탐침형 반도체 미세전극, 텅스텐 전극과 대등하거나 우수한 신호대 잡음비(signal to noise ratio, SNR)특성을 가짐을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.216.2-216.2
• /
• 2013

Nano-indenter는 팁을 박막 표면으로부터 일정 깊이까지 일정한 비율로 힘을 팁에 인가하여 그에 따른 박막의 반응을 in-situ로 확인하기 위하여 고안된 장치이며, 박막은 물론 나노 구조물까지 다양한 범위에서 기계적 특성을 분석하기 위하여 사용되고 있다. 이 연구에서는 유전체 및 확산방지막으로 사용되는 Hf을 rf magnetron sputter로 증착하였으며 이때 Ar 가스와 함께 $N_2$ 가스의 혼합 비율을 다르게 하여 HfN을 증착하였다. 질소 분압에 따라 증착된 HfN 박막은 고온중에서 질소의 영향을 확인하기 위하여 $800^{\circ}C$로 질소 분위기에서 20분간 열처리하여 이후 박막의 nano-mechanical 특성을 nanoindenter를 사용하여 확인하였고 최대 압입력을 250 ${\mu}N$으로 고정하였다. 측정결과 고온 열처리후 HfN 박막은 증착시 질소 분압이 0%에서 5%로 증가함에 따라 surface hardness는 8.6 GPa에서 8.1 GPa로 elastic modulus는 123.7 GPa에서 134 GPa로 각각 변화되는 것을 확인할 수 있었다. 특히, 질소 분압이 2.5%로 증착된 HfN 박막은 열처리후 박막 표면의 물리적 특성이 깊이 방향으로 층을 이루고 있어 nano-indenter 압입시 다수의 pop-in이 나타남을 확인하였다.