• Title/Summary/Keyword: 확산광

Search Result 340, Processing Time 0.028 seconds

Formation of Al diffused back surface field on rear passivation layer (소성 온도 변화 따른 후면 전계 형성이 결정질 실리콘 태양전지 특성에 미치는 영향)

  • Song, Joo-Yong;Park, Sung-Eun;Kang, Min-Gu;Park, Hyo-Min;Tark, Sung-Ju;Kwon, Soon-Woo;Yoon, Se-Wang;Kim, Dong-Hwan
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.06a
    • /
    • pp.91-91
    • /
    • 2009
  • 태양전지의 전극소성 시 알루미늄 후면 전극이 실리콘으로 확산되어 후면전계(Back Surface Field)를 형성한다. 후면 패시베이션층은 후면반사율을 높여 내부광흡수경로를 늘리고 후면재결합속도를 감소시킨다. 본 논문은 후면 패시베이션층이 알루미늄 후면전계 형성에 미치는 영향 및 온도에 따른 변화를 관찰하였다. 절삭손상(Saw damage)이 제거된 실리콘 기판의 후면에 패시베이션층이 없는 것과 후면 패시베이션층으로 사용되는 실리콘 산화막을 형성시킨 시편을 제작하였다. 알루미늄 후면전극을 스크린 인쇄 후 소성온도를 달리하여 실리콘과 알루미늄과의 반응을 비교하였다. 주사전자현미경(SEM)을 사용하여 시편의 단면사진으로부터 소성온도에 따른 실리콘과 알루미늄간의 반응 여부를 관찰하였고, 열분석을 통해 반응 온도를 조사하였다. 패시베이션층이 없는 경우에는 약 $600^{\circ}C$부터 실리콘과 알루미늄간의 반응이 시작되었고, 패시베이션층이 있는 경우에는 약 $700^{\circ}C$부터 반응이 시작되는 결과를 얻었다.

  • PDF

Interview - 제11회 한국파렛트컨테이너산업대상 수상자

  • (사)한국포장협회
    • The monthly packaging world
    • /
    • s.260
    • /
    • pp.98-105
    • /
    • 2014
  • 한국파렛트컨테이너협회가 추최하고 산업통상자원부, 국가기술표준원, 물류신문사가 후원하는 제11회 한국파렛트컨테이너산업대상 시상식이 11월 14일 중소기업중앙회 그랜드홀에서 열렸다. 한국파렛트컨테이너산업대상은 우리나라 산업물류의 혁신을 위하여, 일관수송용 국가표준파렛트인 T-11형과 T12형 파렛트 및 이와 정합성을 갖는 표준 컨테이너의 생산 및 사용 등 보급확산을 통하여, 물류비를 절감하고 국가경쟁력을 향상시켜 가는, 가장 모범이 되는 우수한 기업과 이에 공헌한 개인을 발굴 시상함으로써, 우리나라의 모든 기업들이 유닛로드시스템을 구축하여 물류표준화를 통한 산업물류 효율화를 앞당기는데 기여하기 위해 매년 시상하고 있는 제도이다. 나아가 아시아의 표준 파렛트에 의한 유닛로드시스템의 구축으로 막힘없는 물류의 목표를 달성해 나가는데 보다 더 효과적인 계기가 될 것으로 기대하고 있다. 제11회 한국파렛트컨테이너산업대상 시상식에서 산업통상자원부장관 표창으로는 (주)골드라인, (주)장연, 롯데로지스틱스(주), (주)이랜드리테일, 강병광 상무이사(주식회사 대상)가 수상의 영예를 안았으며, 국가기술표준원장 표창에는 재영솔루텍(주), 세양테크, 한국청정음료(주), (주)삼흥농업회사법인, 배종훈 부문장((주)아워홈) 등이 수상했다. 이 외에도 (주)한국프라텍, (주)비버, (주)대길팩, 영농조합법인 서귀포한라 등이 한국파렛트컨테이너협회장 표창을 받았다. 본 고에서는 수상 업체 및 수상자들의 공적사항을 살펴보도록 한다.

  • PDF

Digital Audio Watermarking in The Cepstrum Domain (켑스트럼 영역에서의 오디오 워터마킹 방법)

  • 이상광;호요성
    • Journal of Broadcast Engineering
    • /
    • v.6 no.1
    • /
    • pp.13-20
    • /
    • 2001
  • In this paper, we propose a new digital audio watermarking scheme In the cepstrum domain. We insert a digital watermark signal Into the cepstral components of the audio signal using a technique analogous to spread spectrum Communications, hiding a narrow band signal in a wade band channel. In our proposed method, we use pseudo-random sequences to watermark the audio signal. The watermark Is then weighted in the cepstrum domain according to the distribution of cepstral coefficients and the frequency masking characteristics of the human auditory system. The proposed watermark embedding scheme minimizes audibility of the watermark signal. and the embedded watermark is robust to mu1tip1e watermarks, MPEG audio ceding and additive noose.

  • PDF

A Study on Application of the Photo Detector for Electromagnetic Fuel Injection System of DI Diesel Engine (직분식 디젤기관 전자분사계의 광검출기 적용에 관한 연구)

  • Ra, Jin-Hong;Ahn, Soo-Kil
    • Journal of Ocean Engineering and Technology
    • /
    • v.13 no.3B
    • /
    • pp.38-46
    • /
    • 1999
  • Increasing stringent emissions legislation and requirement of more effective energy used for diesel engine demand the fine control of the fuel injection system. Recently, the electromagnetic fuel injection control system for diesel engine is tried to realize the optimum diesel combustion by the feel back sensing as optical signal of combustion flame. The photo detectors were made for the feed back signal of electromagnetic fuel injection control for small DI diesel engine. Their abilities to detect defining combustion events were examined. By evaluating test results, it was shown that the wider acceptable optical range design of optical probe window face, and selection of installation position and installation method of detector were important point for improving sensing ability. The detector was shown to detect start and end of diffused combustion and maximum point of flame intensity impossible for pressure sensor, and also shown that the maximum point of flame intensity was 75% of accumulated heat release point within the experimental conditions.

  • PDF

InP crystal growth by modified SSD method (변형된 SSD법에 의한 InP결정 성장)

  • 송복식;정성훈;문동찬;김선태
    • Electrical & Electronic Materials
    • /
    • v.8 no.3
    • /
    • pp.291-297
    • /
    • 1995
  • The InP crystals have been grown by modified synthesis solute diffusion (SSD) method and its properties have been investigated. The crystals have been grown by lowering the crucible quartz for growth in the furnace and crystal growth rate is 1.8mm/day. The lattice constant a. of the grown crystals is 5.867.angs.. Etch pits density along growth direction of crystal changes from 3.0*10.sup 3/cm$\^$-2/ of first freeze part to 6.7*10$\^$4/cm$\^$-2/ of last freeze part and the radial direction of wafer shows nearly uniform distribution. The resistivity and the carrier concentration of the grown crystals are 1.43*10$\^$-1/.ohm.-cm, 7.7*10$\^$15/cm$\^$-3/ at room temperature, respectively. In the photolurninescence at 10K, the radiation transitions are observed by the near band edge recombination, a pair recombination due to Si donor - Zn acceptor and its phonon replica in the InP. The activation energy by Zn diffusion in undoped n-InP crystals is 1.22eV.

  • PDF

Optical Properties of ZnO-ZnMgO Quantum Wells Grown by Atomic Layer Deposition Technique (원자층 증착법으로 성장한 ZnO-ZnMgO 양자우물의 광전이 특성)

  • Shin, Y.H.;Kim, Yongmin
    • Journal of the Korean Vacuum Society
    • /
    • v.22 no.1
    • /
    • pp.7-12
    • /
    • 2013
  • We fabricated ZnO-ZnMgO single quantum well (SQW) samples having different well-widths by using the atomic layer deposition technique. The QW samples exhibit different optical transition behaviors with different QW widths. We confirm that when the well-width of 1.5 nm does not have a confined quantum energy level due to the Mg diffusion into the well caused by after-thermal treatment whereas the QWs wider than 1.5 nm show optical transitions between the confined energy levels.

Design and fabrication of SOI $1\times2$ Asymmetric Optical Switch by Thermo-optic Effect (열광학 효과를 이용한 SOI $1\times24$ 비대칭 광스위치 설계 및 제작)

  • 박종대;서동수;박재만
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.41 no.10
    • /
    • pp.51-56
    • /
    • 2004
  • We propose and fabricate an 1${\times}$2 asymmetric optical switch by TOE using SOI wafer based on silicon which has very large TOE figure and it is a good material for optical devices. SOI wafer consists of 3 layers; upper Si layer for device(waveguide;core, n=3.5), buried oxide layer for insulator(clad, n=1.5) and Si substrate layer. We designed 1${\times}$2 asymmetric y-branched single mode optical waveguide switch by BPM simulation and metal heater by heat transfer simulation. Fabricated switch shows about 3.5 watts of power consumption and over 20dB of crosstalk between output channels.

A Study on the Development of Anti-Fouling System Using a High Frequency?High Voltage Pulse Power (태양광을 활용한 선체방오시스템 개발)

  • Kim, Shin-Hyo;Kim, Hee-Je;Kim, Hyun-Min
    • Journal of Korea Ship Safrty Technology Authority
    • /
    • s.34
    • /
    • pp.18-32
    • /
    • 2013
  • 최근 선저 부착 생물에 관한 문제가 환경오염으로 확대되고 그에 따른 여러 가지의 선체 방오 방법 중 특히 주석(Sn)의 화합물질의 화학반응으로 따개비 등의 오염 요소를 방지하는 기존 방법이 수은, 구리 등의 유독성 화합물에 의해 임포섹스 유발과 그에 따른 2차 오염 확산의 요인이 되어 2012년 7월부터는 유기주석화합물(TBT) 도료를 사용한 신규 선박은 규제되는 등 그 심각성이 대두하고 있다. TBT는 매우 미량의 농도에서도 다양한 생물학적 저해영향을 일으키는 것이 알려져 이를 대체하기 위한 여러 화학물질이 개발됐다. 본 논문에서는 이러한 추세에 따라서, 유독성 화합물의 독성을 벗어나 저 전류의 고주파 고전압 펄스 에너지를 이용한 새로운 환경조성을 통해서 부착성 패류의 선저 부착에 대한 특성을 연구하였으며, 특히 환경오염 및 해양오염에 영향이 적은 방오시스템을 개발하고자 하였다. 또한 본 연구에서 적용된 고전압 펄스 시스템을 이용하여 선체의 부식정도를 저감 가능한 시스템을 구현을 위한 기초 실험과 현재 이슈화 되고 있는 선박평형수의 살균장치에 적용하는 파생연구들을 통하여 해양오염방지 요소들을 겨냥하여 후속연구를 위한 토대를 마련하고자 하였다.

  • PDF

A Case Study on Weather Changes before and after a Nuclear Explosion (핵폭발이 수문기상에 미치는 영향 연구)

  • Joon-Hak Lee
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.261-261
    • /
    • 2023
  • 전 세계적으로 핵실험은 약 2,056회 실시되었으며, 이 중에서 대기권에서 실험한 횟수는 528회로 알려져 있다. 다량의 핵무기가 폭발하게 되면 핵폭발시 강한 복사열에 의해서 생성된 분진과 화재로 발생된 가스가 대기 중으로 확산되어 수 개월간 태양광을 차단함으로써 급격한 지구의 온도하강을 야기시켜 많은 사람들이 죽게 될 것이라는 핵겨울(nuclear winter) 이론이 1983년에 발표된 바 있지만, 핵실험 전·후 실제 기상자료룰 분석한 연구는 드문 편이다. 최근 학계에서 1950~1960년대 핵실험 전·후 실험장소로부터 480km 떨어진 곳의 영국 기상청 자료를 분석한 결과, 지상 핵실험 실시 직후 강수량이 24% 증가했다는 연구결과가 보고된 바 있다. 핵무기가 투하된 지점 중에 한국과 가장 가까운 곳은 1945년 8월 6일 08시 15분, 서울에서 604 km 떨어져 있는 히로시마와, 8월 9일 11시 2분 서울에서 594km 떨어져 있는 나가사키가 있다. 본 연구의 목적은 지상 핵실험이 강수량에 미치는 영향을 분석하기 위한 것으로, 한국과 일본의 기상자료를 그 대상으로 하였다. 본 연구는 히로시마와 나가사키 원자폭탄 폭발 전·후에 강수량 변화를 중점으로 하였으며, 이를 위하여 1940~1950년 기간의 국내 주요 관측 지점의 기상자료와 확보 가능한 히로시마와 나가사키의 기상자료를 수집하여 연구에 활용하였다. 연구결과 핵무기가 폭발하게 되면, 투하지점뿐만 아니라 인근 지역의 수문기상에 영향을 줄 수 있음을 알 수 있었다.

  • PDF

User Verification System using QRcode in Mobile Telemedicine Cloud Environment (모바일 원격의료 클라우드 환경에서 QRcode를 이용한 사용자 검증 시스템 연구)

  • Kim, Young-Hyuk;Lim, Il-Kwon;Lee, Jun-Woo;Li, QiGui;Lee, Jae-Kwang
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2011.11a
    • /
    • pp.858-861
    • /
    • 2011
  • Smart Society로 나아가는 핵심으로 손꼽히는 모바일의 급속한 확산은 교육, 교통, 경제뿐만 아니라 건강에도 큰 영향을 미치고 있다. 그동안 발전이 미진했던 u-Health 기술 및 시장 역시 모바일로 인해 새로운 서비스 모델을 제시함으로써 발전하고 있다. 본 논문은 제안하는 시스템은 u-Health 서비스 중 sensor를 이용하여 원격지 환자의 생체정보를 수집하고, 실시간으로 병원의 클라우드 서버에 전송하는 시스템에서 사용자 검증에 대하여 연구하였다. 여기서 사용자란 클라우드 서버에 접속하는 의사를 말하며, 환자의 생체정보를 보기 위하여 시스템 접속함에 있어 공인인증서나 기타 인증 시스템과 비교해 간편하고, 네트워크 트래픽이 적은 사용자 검증 시스템을 목표로 한다. 그리하여 QRcode를 3개 생성하고, 각 클라우드 서버에 분산 분배 후 서로 섞음으로써 기존의 QRcode와 전혀 다른 인증용 QRcode를 생성할 수 있었다. 이것을 3차원 인덱스를 통해 원본 사용자 QRcode와 대조함으로 사용자 검증 과정을 수행시킴으로써 절차를 간소화하고 네트워크 트래픽을 약 15% 감소시킬 수 있었다.