• Title/Summary/Keyword: 화학혼화제

Search Result 68, Processing Time 0.023 seconds

The Freezing Temperature of Chemical Admixtures for Concrete and the Quality Vareation of Concrete Using the Frozen Admixtures (콘크리트용 혼화제의 동결온도 및 동결된 혼화제의 사용에 따른 콘크리트의 품질변화)

  • 한천구;한경익;이건철
    • Magazine of the Korea Concrete Institute
    • /
    • v.10 no.4
    • /
    • pp.205-212
    • /
    • 1998
  • Frost damage of a storage tank for chemical admixtures caused by a low temperature in winter and quality deterioration of chemical admixtures have been often reported. However, there have been few regulations and researches related to the frost damage of chemical admixtures and facilities. Therefore, this paper is intend to investigate not only, the freezing points of chemical admixtures such as AE admixtures and water-reducing AE admixtures, etc., but also the quality variation of concrete used with chemical admixtures before freezing and after freeze-thaw cycles. According to the results of experiments, most chemical admixtures except anti-freezing agent and accelerating water-reducing AE admixtures should be kept from being frozen in low winter temperatures. However, full agitation of frozen chemical admixtures dose not cause the problems of concrete related to the quality of chemical admixtures.

The Fundamental Study on Quality Properties of Binary Blended Concrete according to Water Reducing Performance of Chemical Admixture and Estimation Equation of Compressive Strength (화학 혼화제의 감수 성능에 따른 2성분계 콘크리트의 품질특성 및 압축강도 추정식에 관한 기초적 연구)

  • Kim, Kyung-Hwan;Oh, Sung-Rok;Choi, Byung-Keol;Choi, Yun-Wang
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.20 no.1
    • /
    • pp.9-17
    • /
    • 2016
  • In this study, binary blended concrete mix with fly ash and ground granulated blast furnace slag was prepared according to 3 level of water reduction performance of chemical admixture (0%, 8% and 16%) and 3 level of water-cement ratio (40%, 45% and 50%) for evaluation of quality properties of binary blended concrete according to performance of chemical admixture. concrete mix was carried out repetition test of three times in order to secure the reliability. As a result, compressive strength according to performance of chemical admixture was found that difference of strength was about 20% occurred, chemical admixture was showed that a great influence on qualities of concrete. In addition, reflected the effect of performance of chemiacal admixture, prediction model equations for concrete compressive strength was proposed, it was found that more than 85% of the high correlation.

Influences on Concrete Quality of Residue Content Change of Chemical Admixtures (화학혼화제 고형분량 변동이 콘크리트 품질에 미치는 영향)

  • Kim, Jin-Cheol;Yoo, Hyeok-Jin;Kim, Hong-Sam;Jeong, Ho-Jin
    • Journal of the Korea Concrete Institute
    • /
    • v.26 no.4
    • /
    • pp.457-463
    • /
    • 2014
  • The permitted limit, ${\pm}12%$, of the change in solid contents based on ASTM C 494 as an interim standard in Korea Expressway Corporation, can not reflect the kind of chemical admixture and the characteristics of solid content so that it differed depending on the admixture types. In this study, effect of cement concrete quality was investigated by solid changes which can be used chemical admixtures acceptance criteria. As a result of an evaluation of a change in the quality of concrete due to solid content, since Ligno-sulfonate based (LG) had a low water reducing ratio, the range of the change in solid content was great while Naphthalene sulfonated based (PNS) and Poly-carboxylate based (PC) High Range Water-reducing Admixtures (HRWR) had a high water reducing ratio, the permitted limit of the difference in solid content currently used as the acceptance criterion should be readjusted. As a result, it is found that the acceptable range must be managed within 10% and 5% when the solid contents less than 25% and more than 25%, respectively.

Evaluation Retention Performance of Phosphate-introduced Chemical Admixture Mortar in Extremly Hot Weather Condition (극서환경용 포스페이트 도입 화학혼화제 모르타르 특성 평가)

  • Ki, Jun-Do;Kim, Kwang-Ki;Kim, Jung-Jin;Park, Soon-Jeon;Kim, Jung-Sun
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2017.11a
    • /
    • pp.96-97
    • /
    • 2017
  • Performances such as retention, setting time and strength generation of mortar with phosphate-introduced chemical admixture, domestic and foreign admixtures are evaluated to find one that meets over 3 hours retention in extremly hot weather condition in this study.

  • PDF

Recent Development and Research of Chemical Admixtures for Concrete (콘크리트용 화학 혼화제의 개발 및 연구의 최신 동향)

  • 김병기;김송호
    • Magazine of the Korea Concrete Institute
    • /
    • v.14 no.1
    • /
    • pp.38-43
    • /
    • 2002
  • 전 세계에서 콘크리트 관련 기술의 변천사를 살펴보면 공기 연행제(air entraining agent), 감수제 (water reducing agent), 고성능 감수제(superplasticizer high range water reducing agent)로 대변되는 콘크리트용 화학 혼화제의 개발이 콘크리트의 성능 향상의 큰 전기 중의 하나 라고 할 수 있다. 1930년대 미국에서 우연히 발견된 공기 연행제의 사용으로 콘크리트의 동결 융해 저항 성능을 획기적으로 개선할 수 있게 되었으며 또한 펄프 폐액에서 추출되는 리그닌(lignosulfonates)이 시멘트의 분산성을 높여 주는 것을 발견하게 되었다.(중략)

Performance Evaluation of Mortar Containing Mechanochemical Treated Self-Healing Admixtures (기계·화학 처리 자기치유 혼화재가 포함된 모르타르의 성능평가)

  • Park, Dong-Cheol;Kwon, Hyuk;Lee, Jung-Woo;Hwang, Moo-Yeon;Kim, Tae-Hyung
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.9 no.3
    • /
    • pp.367-374
    • /
    • 2021
  • In this study, the applicability of mechanochemical process for the manufacture of self-healing admixtures and the effect of mechanochemical process on the self-healing performance were evaluated. The self-healing admixtures were adopted as a highly reactive materials(expansive agent, swelling material and crystal growth agent) for mechanochemical processes. The self-healing admixtures for the mechanochemical process application were evaluated by X-Ray Diffraction and Fourier Transform Infrared Spectroscopy analysis, water permeability performance was used to evaluate self-healing performance of mortar. As a result of the evaluation, the self-healing performance of the WM(With-Mortar)3 sample to which mechanochemical process increased by 4.1% compared to the WM1 sample that was not treated, and the average healing index was 94.3%.

Development of Admixtures of Polycarboxylic acid (폴리카본산계 유동화 혼화제 개발)

  • 전용진;조석형;홍영호;한종필
    • Proceedings of the KAIS Fall Conference
    • /
    • 2001.05a
    • /
    • pp.300-302
    • /
    • 2001
  • 폴리카본산계 기능성 고분자를 합성해서 고성능 감수제 원료로 활용하여 고유동화 혼화제를 개발하고자 한다. 폴리카본산계 기능성 고분자를 합성한 후, 이를 고유동, 고강도 혼화제 원료로의 제반 물성을 확인하고, 이를 현장에 적용하여 현재의 제품을 획기적으로 개선하고, 혼화제 품질의 우위성을 확보하기 위해 1) 시멘트 및 골재 표면에서의 적절한 계면활성을 갖는 분자설계를 하였으며, 2)분자량의 조절 기술의 개발을 개발하였다. 합성에 있어서 첫째, 시멘트 및 골재 표면에서의 적절한 계면활성을 갖는 분자설계와 둘째, Mw 5,000정도의 분자량을 갖는 감수제의 합성기술을 개발하였다. 이렇게 제조된 고성능 유동화제의 화학구조 해석을 해석하고 분자량 및 분자량 분포를 측정한 다음, 시멘트 페이스트의 유동성, 점도, 슬럼프로스 등을 측정하여 고성능 유동화제의 성능인 시멘트 페이스트의 유동성을 시험하였다. 그 결과 고유동성을 갖는 것과 장시간 안정한 유동성을 나타내었으며, 경과 시간에 따른 겉보기 점도변화를 측정한 결과 점도의 상승이 초기에 일어나다가 시간의 경과에 따라 점도가 감소하는 경향을 나타내었다. 따라서 경과시간에 따른 유동성 손실을 억제할 것으로 기대한다.