• Research in Plant Disease
• /
• v.20 no.2
• /
• pp.71-78
• /
• 2014

Gamma irradiation and its convergence with nano-silver particles and sodium dichloroisocyanurate (NaDCC) were investigated to inhibit germination and mycelial growth of Botrytis elliptica, the pathogen of lily leaf blight. In addition, the same treatments were studied on the process of disease development with detached leaf of lily cv. Siberia. Spray inoculation, which is closer to natural infection than wound inoculation, can be a way to investigate infection ability of the treated pathogen. The irradiating dose required to reduce the population by 90%, $D_{10}$, was 526 Gy irradiating with 0-2000 Gy gamma ray on the conidial suspension as well as the growing mycelia. Even at 2000 Gy, the mycelium was not killed but just delayed its growth at 1-2 days behind. Convergent treatment with 40 mg/l of NaDCC just before 200 Gy gamma irradiation was the best way to decrease the conidial germination about 1/1000 times. The control values of gamma irradiation were 23% and 19.5% at wound inoculation and spray inoculation, respectively. On wound-inoculation, the control value of NaDCC only was 89%, and that of NaDCC convergent with 200 Gy gamma irradiation was 32%. On sprayinoculation, the highest control value was NaDCC at 50%, and that of NaDCC convergent with gamma irradiation was 24%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.352-355
• /
• 2003

비자성이며 비전도성의 물리적 성질을 갖는 자연산 퀄쯔(quartz)와 용암석 스코리아를 대상으로 마그네타이징 처리를 하여 분석하였다. 마그네타이징 처리를 위하여 강력한 기계화학적 분쇄 반응을 시켰으며, 분쇄 반응시 알코올계의 솔벤트를 반응 용매로 사용하였다. 퀄쯔와 스코리아의 마그네타이징 처리에서 비교적 비중이 큰 퀄쯔의 경우와 비중이 작은 스코리아의 경우에도 분쇄된 분말이 물에 뜨는 것을 확인할 수 있으며, 친유성으로 기름에 대한 흡착 성질이 우수함을 확인하였다. 자연산 퀄쯔와 함께 스코리아를 바탕물질로 하여 기계-화학적 반응 기술로 고 분산성 흡착반응에 의한 고분자 물잘 생성을 유도하여 나노복합체를 제조하였다. 반응의 처리조건과 적용과정에 따라서 기계-화학적 반응을 통하여 얻어진 물질은 자기적 성질과 유전체 및 전기적 성질을 동시에 나타낸다. 부착성 융합 복합물질의 특징을 고려하여 시그니토마그네틱스(Segneto-magnetics)로 분류되는 합성분말은 특히 유류성분에 대하여 높은 흡착성을 가지며, 강한 자기적 성질을 띄는 10-50 nm 두께의 하나 또는 그 이상의 이질적 융합 화합물 층이 석영이나 수정체의 표면에 합성되어 특유의 자기, 전기적 성질을 나타낸다.

• Journal of Life Science
• /
• v.8 no.2
• /
• pp.197-202
• /
• 1998

The cell of Kluyveromyces fragilis yeast, which is worthy of an algal substitute, was disrupted by a chemical treatment to increase the digestion of filter-feeders that yeasts are fed to. The optimum conditions of the chemical treatment were obtained by incubating yeasts at 3$0^{\circ}C$ for one hour after treated by 1 M of Na$_{2}$-EDTA that was dissolved in 0.2 M of Tris-buffer and by 0.3 m of 2-mercaptoethanol. The percentage of protop[last production was about 30%. The percentage could be doubled by the pretreatment of three times of 30 seconds sonication.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.04a
• /
• pp.108-109
• /
• 2011

• Journal of the Society of Disaster Information
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2017

301 cases of chemical accidents occurred during the recent three years('13~15) recording about 100cases on average in Korea.. Chemical accidents has brought casualties and negative impact on the environment. The chemical accident by transporting vehicles during recent 3 years records 21 on average & takes about 21% of the whole chemical accident. Systematic investigation on chemical accident was needed by corresponding authorities since the transport accident has occurred on the road, all over the nation. For the systematic investigation on the accident scene by the corresponding authorities, the cooperation of transport companies and transport contractor is highly necessary. The investigation of such accident scene was examined and analyzed in this study. Through this study, the results can be basis to analyzed the cause of chemical accident by transporting vehicles and to prepare procedures for on-site investigation and handling systematically.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.197-202
• /
• 1998

연속 섬유공정은 섬유물이 이동하는 가운데 연속적으로 기계적인 처리 또는 물리/화학적 가공이 행하여진다. 따라서 원료의 공급속도 (feeding speed)와 생산되는 제품의 방출속도(delivery speed)사이에 정확한 속도비를 유지하는 것은 공정처리를 받고 있는 섬유물에 가해지는 부하를 일정하게 하므로써 제품의 물리적, 화학적 성질을 균일하게 하여 품질유지에 큰 영향을 미치게 된다.(중략)

• 기계와재료
• /
• v.1 no.2 s.2
• /
• pp.94-102
• /
• 1989

표면처리는 물리.화학적 방법과 전기화학적 방법으로 대별하여 이루어질 수 있으나, 본고에서는 최근 첨단화되고 있는 물리적 방법에 대하여 우선 기술코져 한다.

• Journal of Korea Foundry Society
• /
• v.29 no.3
• /
• pp.113-119
• /
• 2009

• Korean Journal of Environmental Agriculture
• /
• v.18 no.4
• /
• pp.332-338
• /
• 1999

To treat livestock wastewater effectively by electrochemical method using a stainless steel electrode or au aluminum electrode, the effects of voltage, distance of electrodes and PACS(Poly Aluminum Chloride Silicate) dosage on removals of pollutants in batch experiment for investigation the optimum treatment conditions of livestock wastewater were investigated. The results were summarized as follows ; On the effect of voltage, temperature and pH in electrochemical reactor were increased with increase in voltage but EC was a reverse in both electrodes. Removals of COD and T-N were increased with increase in voltage in both electrodes. SS removal was greater than 90% regardless of voltage without doing electrochemical reaction over 15min at 20V or 12min at 30V in both electrodes. T-P removal was over 90% regardless of voltage in both electrodes. On the effect of distance between two electrodes, removals of COD, T-N and T-P were increased with closeness in distance between two electrodes, and SS removal was greeter than 90% regardless of distance between two electrodes in both electrodes. On the effect of PACS dosage, removals of COD, T-N and T-P were increased with increased in PACS dosage up to 200㎎/l in both electrodes. SS removal was greater than 90% regardless of PACS dosage in both electrodes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.206-214
• /
• 2011

Fifteen clones of poplars, 2 clones of willows, and yellow poplar were used to evaluate the effects of 5 treatments such as SCBLF (slurry composting and biofiltration liquid fertilizer), general slurry liquid fertilizer, chemical fertilizer, groundwater, and control (no treatment) on vitality, growth performance, and biomass production. Five cuttings for each tree species were planted in 3 replications. After planting cuttings, a coppice was induced by cutting off stems at 10cm above the ground. Data were collected for first growing season and trees were harvested at the end of October. Maximum mortality rate i.e. 96% was recorded in the cuttings treated with groundwater and minimum 92% with control (no treatment). In all tree species, sprouting of stump was not differ significantly among the treatments. Total nitrogen concentrations of leaves and stump sprouts were higher in the treatment of SCBLF than the control, 26.6% and 22.9%, respectively. Biomass production was highest in the stumps treated with chemical fertilizer, $1.98Mg\;ha^{-1}\;year^{-1}$, and lowest in control ($1.34Mg\;ha^{-1}\;year^{-1}$).