• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.13-19
• /
• 2005

An experimental study is presented for extinguishing characteristics of liquid fuel fire by water mist containing sodium acetate trihydrate. To evaluate the extinguishing performance of water mist containing an additive, the evaporation characteristics of a water droplet on a heated surface was examined. The evaporation process was recorded by a charge-coupled-device camera. Also, small-scale extinguishing tests were conducted for n-heptane pool fire in ventilated space to measure flame temperature variation. The average evaporation rate of a water droplet containing an additive was lower than that of a pure water droplet at a given surface temperature due to the precipitation of salt in the liquid-film and change of surface tension. In case of using an additive, the flame temperature was lower than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing an additive was increased reducing flame size. And also dissociated metal atoms, sodium, were reacted as a scavenger of the major radical species OH^-,\;H^+$ which were generated for combustion process. Moreover, at a high pressure of 4MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1999-2004
• /
• 2011

This research aims to develop polymer composites which can be used for PEMFC bipolar plate by injection molding process. Considering the moldability and stiffness, we used LCP(Liquid crystal polymer) as base resin. In order to improve electrical conductivity and mechanical properties, we chose carbon black, and both synthetic graphite and expanded graphite. The composites with different recipe are prepared for injection molding of PEMFC bipolar plate and CAE(Computer Aided Engineering) analysis was performed to predict melt flow and fiber orientation We did successfully fabricate the ASTM specimens by injection molding, and measure the electrical conductivity of the samples by using four point probe device. We measured mechanical properties such as flexural strength, flexural modulus and Izod impact strength. Conclusively, the electrical conductivity increased with increasing additive concentration, but both flexural strength and Izod impact strength decreased due to the brittle nature of carbon-based additives.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.23-29
• /
• 2003

In this paper, effects of the acidification of ground and the chemical additive materials-ferric oxide, calcium chloride and calcium sulphate on the compressibility characteristics of the marine clay treated with quick lime were investigated. The rapid inflection point method was carried out. Results showed that the compression index of the untreated marine clay increased as the pH of pore water decreased. Also, the preconsolidation pressure, the coefficient of consolidation and the coefficient of permeability of the untreated marine clay decreased with pH of pore water. In the case of the marine clay treated with the quick lime-calcium chloride, the compression index decreased and the coefficient of consolidation and the coefficient of permeability increased. Specially, the preconsolidation pressure of sample treated with the quick lime-ferric oxide was higher than that of another samples.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.929-936
• /
• 1995

LOMI 제염제의 전기화학적 제조공정 중 전하운반체의 역할 및 V$^{3+}$ 이온의 침전현상을 방지하기 위하여 첨가되는 과량의 formic acid 는 제염제 제조시에는 중요한 역할을 하지만 제염 폐기물의 양을 증가시키는 요인이 되기도 한다. EPRI 공정에서는 formate : V 의 비율(FVR)이 10:1 인 조건에서 V$^{2+}$-formate 를 제조한 후 음이온 교환 수지를 이용하여 과량의 formate 를 제거하는 공정을 사용한다. 이러한 방법으로 줄일 수 있는 FVR의 한계가 약 2.5 : 1 이다. 본 연구에서는 제염제 중 formate 의 양을 더욱 줄일 수 있는 방법으로써 V$^{2+}$-formate 제조시 용액 중에 picolinic acid를 미리 첨가하는 영향을 조사하였다. V$^{2+}$ 이온의 농도가 0.1 M 일 때 FVR 를 1.5:1 까지도 줄일 수 있음을 확인하였다.

• Korean Chemical Engineering Research
• /
• v.56 no.3
• /
• pp.303-308
• /
• 2018

Silicon/Carbon (Si/C) composite as anode materials for lithium-ion batteries was synthesized to find the effect of binders and an electrolyte additive. Si/C composites were prepared by two step method, including magnesiothermic reduction of SBA-15 (Santa Barbara Amorphous material No. 15) and carbonization of phenol resin. The electrochemical performances of Si/C composites were investigated by charge/discharge, cyclic voltammetry and impedance tests. The anode electrode of Si/C composite with PAA binder appeared better capacity (1,899 mAh/g) and the capacity retention ratio (92%) than that of other composition coin cells during 40 cycles. Then, Vinylene carbonate (VC) was tested as an electrolyte additive. The influence of this additive on the behavior of Si/C anodes was very positive (3,049 mAh/g), since the VC additive is formed passivation films on Si/C surfaces and suppresses irreversible changes.

• Journal of the Korean Electrochemical Society
• /
• v.5 no.3
• /
• pp.159-163
• /
• 2002

The use of lithium metal anode at lithium metal secondary battery can provide the very high energy density. Nevertheless, there are some problems that are short cycle life, lack of safety and poor thermal stability. Cycle life and cycling efficiency decline due to passivating films, dendritic lithium and increasing surface film by the reaction of lithium metal and electrolyte. This work investigated the additive effect of benzene, toluene, tetram-ethylethylenediamine, into the electrolyte. The cycling efficiency and cyclability are improved. The reason is confirmed by decreasing film resistance and increasing polarization resistance at AC impedance analysis. Electrolyte additive has a relatively less reactivity than electrolytes lithium and is adsorbed on lithium leading to suppression of the reaction between the electrolyte and lithium as well as an improvement in the lithium deposition mophology.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.549-555
• /
• 2018

In this study, the electrochemical properties of nano-Pb/activated carbon (nano-Pb/AC) composites and electrolyte additives were examined to improve the performance of ultra batteries. Physical properties of the prepared nano-Pb/AC composites were analyzed using FE-SEM, TEM, XPS and BET. The electrochemical performances of ultra batteries were performed by cycle, rate performance and impedance tests. The cycling performance of nano-Pb/AC (Pb : 9 wt%) coated ultra battery increased by 150% with respect to the lead acid one, and the discharge specific capacity increased by 119-122% for 1-5 C rate tests. As a result of the impedance test, it was confirmed that the internal resistance decreased as the nano lead content increased. The cycle performance of the ultra battery containing 0.45 vol% electrolyte additives showed 140% longer than that of no electrolyte additives.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.563-569
• /
• 2014

Ruby is one of the most favor colored gem, for beautiful red tone, be high in scarcity value. However, rubies with high quality are produced in restricted regions, such as in Thailand, Sri Lanka, Myanmar, and Tanzania etc., and they have been gradually exhausted by mining for a long period. Therefore, improving qualities of low level rubies with various treatments is arising an alternative way to obtain better rubies. Gemological and mineralogical properties of the natural ruby from Tanzanian were studied with heat treatments. Those characteristics were compared between only heat and adding flux materials under heating. Tanzanian raw rubies were applied a heat treatment ($1,600^{\circ}C$ for 6 hours). However, chromameter and UV-Vis analyses found that a simple heat treatment is inappropriated for the Tanzanian ruby. Although $Cr^{3+}$ containing for red color in the ruby increased with heat treatment, the ruby displays dark medium red because of Fe in the ruby as a form of $Fe_2O_3$. The low transparency after heat treatment is attributed to the recrystallization of $SiO_2$ which has a low melting point. Chromameter confirmed adding Pb-containing flux under heating greatly improves the clarity and color of Tanzanian rubies with micro-fractures and cavities on the surface. EMPA results show that Pb as an additive fills the cavities and cracks on raw Tanzanian rubies during the heat treatment. As a rewult of it, the quality of the Tanzanian ruby raw dramatically improved. These results indicate that the heat treatment with an additive (Pb in this study) is an effective way to obtain better quality of the Tanzanian ruby. Consequently, this study suggests a suitable method to improve the properties of the Tanzanina ruby. The result of this study would provide useful information to upgrade the qualities of similar gem stones such as corundum and sapphire.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.159-160
• /
• 2015

본 연구에서는 구리 도금액 구동 과정에서 SPS의 분해와 분해 산물의 영향에 대해 고찰하였고 이를 실시간으로 관찰하기 위한 전기화학적 모니터링법을 제시하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.351-351
• /
• 2008

리튬이차전지 산업의 눈부신 발전과 이에 의한 편리함의 이면에는 아직도 안전성 개선이라는 중요한 문제가 있다. 이에, 난연성 물질로 알려진 트리아진 유도체들을 전해액의 첨가제로 사용하여, 전지의 안전성 개선여부를 알아보았다. 전기화학적, 열적분석을 통하여 첨가제가 전지 성능에 미치는 영향과 열적안전성 개선에 대해서 토의하고자한다.