• 제목/요약/키워드: 홍채학

검색결과 147건 처리시간 0.025초

수경재배 인삼 뿌리와 잎의 항산화 활성 (Antioxidant Activities of Hydropoic-cultured Ginseng Roots and Leaves)

  • 이연리;서정현;홍채영;김길호;이준수;정헌상
    • 한국식품영양학회지
    • /
    • 제33권1호
    • /
    • pp.58-63
    • /
    • 2020
  • This study was conducted to investigate the antioxidant activities on hydropoic-cultured ginseng roots (HGR) and leaves (HGL). The samples were lyophilized, extracted with 80% ethanol, and then evaluated the antioxidant activities compare with conventional-cultured ginseng. Total polyphenol content of ginseng, HGR, and HGL were 128.85±0.41, 115.74±1.28, and 282.15±5.15 mg/g, respectively. The DPPH radical scavenging activity(IC50) was the highest value of 6.47±0.13 mg/mL in the HGL. The ABTS radical scavenging activity was the highest value of 29.37±0.37 mg AA eq/g in HGL, and ginseng and HGR were 10.23±0.49 and 8.18±0.37 mg AA eq/g, respectively. The reducing power of ginseng, HGR, and HGL were 0.56±0.01, 0.53±0.01, and 0.68±0.01, respectively. Chelating effect was the highest value of 92.65±3.42% in HGL. The results of this study suggest that antioxidant activities in hydropoic-cultured ginseng leaves could have significant health benefits.

SHS법에 의한 $\textrm{ZrB}_2$ 합성과 반응소결된 $\textrm{ZrB}_2$-ZrC계 복합체의 제조 (Fabrication of $\textrm{ZrB}_2$ by SHS Process and Reaction-bonded $\textrm{ZrB}_2$-ZrC Composite)

  • 이윤복;김정섭;김상배;박홍채;오기동
    • 한국재료학회지
    • /
    • 제9권1호
    • /
    • pp.8-13
    • /
    • 1999
  • $ZrB _2$ was prepared from a mixture of $ZrO_2$, $B_2$$O_3$and Mg by SHS method. The combustion products were successfully obtained from a mixture of $Zro_2$:$B_2$$O_3$:Mg=1:2.0:8.5(molar ratio). MgO, by-product, was removed to 92.7% by leaching with 1M HCl solution at 9$0^{\circ}C$, for 10 hours. After leaching, the mean particle size of the resultant $ZrB_2$powders was 23.6$\mu\textrm{m}$. $ZrB_2$-ZrC composite was suitably obtained from a mixture of C/Zr=1.2 molar ratio by arc-melting method. The density of arc-melted specimen increased by adding excess zirconium content(x). The bulk density was 6.17g/㎤ for x=0, and 6.37g/㎤ x=4. Vickers hardness of arc-melted specimen was /$1290kg\textrm{mm}^2$ for x=0, and fracture toughness increased to 4.2MPa.m\ulcornerforx=4 compared to 3.4MPa.m\ulcornerfor x=0.

  • PDF

액상침투법을 이용한 $Al_2O_3/TZP$ 복합체의 제조 및 특성 (Preparation and Characteristics of $Al_2O_3/TZP$ Composites Using Liquid Infiltration Technique)

  • 양태영;이윤복;김영우;오기동;박홍채
    • 한국재료학회지
    • /
    • 제10권5호
    • /
    • pp.321-327
    • /
    • 2000
  • 다공성 알루미나 소결체내부로 3Y-TZP 및 12Ce-TZP 전구체를 각각 액상침투시킴으로써 2종류의 $Al_2O_3/TZP$복합체를 제조하였다. 소량의 (~11.0 wt%) TZP의 첨가는 Al2O3소결체 ($1600^{\circ}C$, 2시간)의 강도 (19~59%)와 파괴인성(14~157%)을 증가시켰다. 3Y-TZP의 첨가는 복합체의 강도의 향상에 12Ce-TZP의 첨가는 인성의 향상에 보다 효과적이었다. 침투도니 TZP는 복합체의 내부보다 표면에 집중되었으며, 그 결과 이곳에서의 입성장에 빨랐고 $Al_2O_3$의입성장 억제효과도 상대적으로 뛰어났다. 입계 및 입내균열전파가 일어났으나 $Al_2O_3/12Ce-TZP$의 경우가 $Al_2O_3/3Y-TZP$에 비하여 입계파괴가 우세하였다

  • PDF

도룡뇽(Hynobius leechi)의 시각계 발생 (Development of Visual System in Korean Salamander(Hynobius leechi))

  • 정선우;윤춘식;김덕훈
    • 한국안광학회지
    • /
    • 제3권1호
    • /
    • pp.9-13
    • /
    • 1998
  • 한국산 도룡농 Hynobius leechi의 시각계발생을 형태학적으로 연구하였다. 수정란을 채집하여 멸균된 생리식염수에서 발생시키고 5-30mm길이의 유생을 크기별로 하였다. 표본은 paraffin에 포매하고 절편하여 광학현미경하에서 관찰하였다. 5mm유생에서, 안배에 의해 유도된 수정체의 원기는 감각외 배엽과 결함되어 있었다. 12mm유생은 수정체가 구형으로 되고 색소상피가 뚜렷해지나 망막층의 분화는 일어나지 않았다. 14-16mm유생은 망막층의 분화가 뚜렷해지며 수정체의 중심부섬유의 핵이 붕괴되었다. 20mm유생의 안배의 외연부는 얇아져서 홍채와 모양체를 형성하였다. 30mm유생에서는 맥락막이 두터워지고 연골이 안구의 외곽에서도 나타났다. 광수용세포층의 외절은 점차로 길게 성장하고 안구신경은 연골을 지나 뇌의 복측에 연결된다.

  • PDF

방사선 치료 시 조사야 내에 위치할 수 있는 이물질이 체표선량에 미치는 영향 (Effect of skin dose by materials located in treatment field)

  • 홍채선;김경태;주상규;김종식;박영환
    • 대한방사선치료학회지
    • /
    • 제14권1호
    • /
    • pp.59-64
    • /
    • 2002
  • Purpose : In radiotherapy, various materials are used to located in treatment field unintentionally. It increases the dose delivered to the skin by interactions of the X-ray within the materials and occurs unwanted skin reaction.(due to the dose build-up effect) This aim of the this study is to measure the increase in skin dose when 13 materials are located in treatment field. Methods : Photon beam measurements were made using an plane-parallel chamber (Markus, PTW-Freiburg) in a polystyrene phantom. skin dose were measured using various overlaying 13 materials. a fixed geometry of a $10{\times}10cm$ field, a SSD=100cm and photon energy 4MV on Varian CLINAC 600C accelerator were used for all measurements. Results : There is an increase in skin dose for all materials($16.4{\sim}160.1\%$). As a percentage of maximum dose, the lowest skin dose were measured for the underwear with silk($43.2\%$) and the highest were measured for the 100m1 fluid-bag($96.6\%$) Conclusion : There is a significant increase in skin dose with 13 materials in the treatment field. a significant increase in skin dose can occur which could produce unwanted skin reaction. considerations for placement of 13 materials to be outside the treatment field whenever possible should be used to keep skin dose to a minimum level.

  • PDF

액상-환원법으로 초미세 Cu 분말 제조 시 반응 조건의 영향 (The Influence of Reaction Conditions on the Preparation of Ultra Fine Cu Powders with Wet-reduction Process)

  • 박영민;진형호;김상렬;박홍채;윤석영
    • 한국재료학회지
    • /
    • 제14권11호
    • /
    • pp.790-794
    • /
    • 2004
  • Ultra-fine Copper particles for a conductive paste in electric-electronic field were prepared using wet-reduction process with hydrazine hydrate ($N_{2}H_4{\cdot}H_{2}O$) as a reductor. The effect of reaction conditions such as the amount of dispersion ($Na_{4}O_{7}P_2{\cdot}10H_{2}O$) and reductor ($N_{2}H_4{\cdot}H_{2}O$) on the particle size and shape for the prepared Cu powders was investigated. The quantity of dispersion and reductor varied from 0 to 0.0025 M and from 5 to 40 ml at a reaction temperature of $70^{\circ}C$, respectively. The particle size, shape, and structure for the obtained Cu particles were characterized by means of XRD, SEM, TEM, EDS and TGA. The aggregation of Cu particles was reduced with relatively increasing of the amount of dispersion at fixed other reaction conditions. The smaller Cu particle with size of approximately 300nm was obtained from 0.032 M $CuSO_4$ with adding of 0.0025 M $Na_{4}O7P_2{\cdot}10H_{2}O$ and 40ml $N_{2}H_4{\cdot}H_{2}O$ at a reaction temperature of $70^{\circ}C$.

한국 집고양이의 문맥전신션트 한 증례 (A Case of Portosystemic Shunt in a Domestic Shorthair Cat)

  • 조은광;정예찬;최을수
    • 한국임상수의학회지
    • /
    • 제31권4호
    • /
    • pp.316-318
    • /
    • 2014
  • 3년령 한국 집고양이가 갑작스럽게 발병한 간헐적 경련 증상을 주 증상으로 내원하였다. 신체검사상 구리 빛 홍채가 관찰되었고, 양안에서 위협반사 소실이 관찰되었다. 혈액학 검사와 혈청 화학 검사에서 경증의 적혈구 증가증과 심한 소적혈구증, 증가된 ALT 활성도가 확인되었으며, 추가로 실시한 간기능 평가에서는 담즙산염 농도와 암모니아 농도가 증가하였다. 방사선 검사에서 간 내 다수의 결절이 관찰되었고, 간외성 션트 혈관을 발견하였으며, 추가로 실시한 컴퓨터 단층 촬영을 통해 복합 간외션트를 확인하였다. 고양이는 션트 혈관에 대한 외과적 처치술을 받기 위해 증상 완화를 위한 디아제팜과 락툴로즈를 투여하였으나 경련이 심화되었고, 심장 정지가 와서 폐사하였다.

SHS법에 의한 붕화지르코늄의 합성 및 치밀화에 미치는 첨가제의 영향 (Effect of Additives on Synthesis of $\textrm{ZrB}_{2}$ By SHS Process and Its Densification)

  • 이윤복;곽철상;김상배;김영우;박홍채;오기동
    • 한국재료학회지
    • /
    • 제8권7호
    • /
    • pp.653-658
    • /
    • 1998
  • ZrO2, B2O3 및 AI을 사용하여 SHS법에 의한 붕화지르코늄을 합성을 하고 산화철과 알루미늄 분말의 첨가가 합성물의 치밀화에 미치는 영향에 대하여 검토하였다. 합성물중에 존재하는 결정상은 대부분이 ZrB2와 $\alpha$-AI2O3상이었다. 산화붕소와 알루미늄의 몰비가 1.0:3.3이상일 때 합성물의 치밀화는 크게 증가하였고, ZrB2 입자도$\alpha$-AI2O3용융상과 더불어 조대하였다. 산화철 1목에 대하여 알루미늄을 1-3몰을 첨가한 것과 산화철 1.5몰에 대하여 알루미늄을 3몰 첨가시 $\alpha$-AI2O3를 중심으로하는 슬라그상으로부터 용융상의 분이가 가능하였고, 이들 용융상에 존재하는 결정상은 ZrB2이외에 Fe, Fe2B, Zr2Fe상이었다. 용융상의 상대밀도는 산화철 1몰에 대하여 알루미늄을 1몰 첨가시 83.2%인 반면에 그 이상의 첨가량에 대해서는 치밀화는 크게 증가하여 알루미늄을 3몰 첨가한 경우 상대밀도는 93.7%로서 최대를 나타내었다.

  • PDF

X-선 회절 및 격자 매개변수를 이용한 biphasic calcium phosphate 분말의 생분 해성 특성평가 (Characterization of the biodegradable behavior for biphasic calcium phosphates using X-ray diffraction and lattice parameter)

  • 김동현;송창원;김태완;진형호;박홍채;윤석영
    • 한국결정성장학회지
    • /
    • 제21권4호
    • /
    • pp.169-174
    • /
    • 2011
  • 합성된 biphasic calcium phosphate(BCP) 분말의 나노크기 생분해성 거동은 X-선 회절 분석방법, 격자 매개변수 및 전계방출형 주사전자현미경을 통해 특성평가 하였다. BCP 분발은 공침반응 및 하소과정을 통해 합성하였고, 합성된 분발은 행크 용액 (pH = 7.4, $36.5^{\circ}C$)을 이용하여 3주 동안 in vitro 시험 하였다 분해 시험(in vitro) 후, BCP 단위포의 매개변수는 a 및 c축의 불규칙한 변화와 비슷한 격자 왜곡 및 팽창 거동을 보였다.

생체유사액 침적에 따른 표면 처리된 titanium plate에 아파타이트 형성 (Apatite formation on the surface treated-titanium plate in a simulated body fluid)

  • 이창훈;진형호;박홍채;윤석영
    • 한국결정성장학회지
    • /
    • 제19권1호
    • /
    • pp.19-24
    • /
    • 2009
  • 생체모방법을 이용하여 표면 처리된 titanium plates 표면에 아파타이트 형성에 관하여 조사하였다. 표면 처리방법으로는 우선, titanium plate 표면에 titanium oxide층을 형성시키기 위하여 열처리온도를 $400^{\circ}C$, $600^{\circ}C$, 그리고 $800^{\circ}C$에서 전기로에서 5시간 유지하였으며, 열처리된 titanium plates 1 M를 수산화나트늄 용액에 침전시켜 표면을 화학적으로 처리하였다. 생체모방법으로 titanium plates 표면에 아파타이트를 형성시키기 위하여 표면처리된 titanium plates 를 Kokubo's recipe에 의하여 제조된 생체유사액(SBF)에 침적시켰다. SBF 용액에 1주와 3주기간 동안 침적시킨 후, 표면처리를 달리한 titanium plates 표면에 형성된 코팅층을 서로 비교 분석하였다.