• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.6
• /
• pp.1059-1075
• /
• 2017

The objective of this study was to evaluate the freezing and thawing resistance of the existing drainage system for leakage treatment of underground concrete structures operating in cold regions. The freezing and thawing test was conducted on 4 types of drainage system specimens to evaluate the freezing and thawing resistance of the drainage system. The freezing and thawing resistance was evaluated on 4 types of Hotty-gel, as a waterproofing material, connection methods and on two methods to fix the drainage board with Hotty-gel on the surface of cement concrete specimen. One cycle of the freeze-thaw testing was 48 hours (24 hours of freezing and 24 hours of thawing), and the temperatures of freezing and thawing were at $-18^{\circ}C$ and $10^{\circ}C$, respectively. Among the 4 types of Hotty-gel connection methods, leakage occurred after 28 cycles (8 weeks) of freeze-thawing only in the Hotty-gel connection method with the 'V' groove applied to the corner of the drainage board. No leakage occurred in the 3 types of Hotty-gel connection methods. In two fixing methods, leakage occurred in the method of fixing the drainage board on the cement concrete specimen using the washer, screw and plastic wall plug. Leakage occurred at one point after 10 cycles (3 weeks) of freezing and thawing. After 28 cycles (8 weeks) of freezing and thawing, leakage point increased to 5 points. As time passed, the leak point was not increased, but the amount of leakage was increased at each leak point. The Hotty-gel connection method with cross-sectional diagonal shape was evaluated to be the highest in the production efficiency considering the production time and manufacturing method of the Hotty-gel connection shape. In the construction efficiency considering the construction time and construction method, the fixing method of air nailer, fixed nail and washer was superior to that of the washer, screw and plastic wall plug.

• The Journal of Natural Sciences
• /
• v.10 no.1
• /
• pp.209-216
• /
• 1998

The results of the study of diving the 21st century's Korea fashion market into consumer market, fashion market, and a new marketing strategy are as follows. The 21st consumer market is First, a fashion democracy phenomenon. As many people try to leave unconditional fashion following, consumer show a phenomenon to choose and create their own fashion by subjective judgements. Second, a phenomenon of total fashion pursuit. Consumer in the future are likely to put their goals not in differentiating small item products, but considering various fashion elements based on their individuality and sense of value. Third, world quality-oriented. With the improvement of life level, it accomplishes to emphasize consumers' fashion mind on the world wide popular use of materials, quality, design and brand image. Fourth, with the entrance of neo-rationalism, consumers show increasing trends to emphasize wisdom, solidity in goods strategy pursuing high quality fashion and to demand resonable prices. Fifth, concept-oriented. Consumers are changing into pursuing concept appropriate to individual life scene. Prospecting the composition of the 21st century's fashion market, First, sportive casual zone will draw attention more than any other zone. This is because interest in sports will grow according to the increase of leisure time and the expasion of time and space in the 21st century, and also ecology will become the important issue of sports sense because of human beings's natural habit toward nature. Second, the down aging phenomenon will accelerate its speed as a big trend. Third, a retro phenomenon, a concept contrary to digital and high-tech, will become another big trend for its remake, antique, and classic concept in fashion market with ecology trend. New marketing strategy to cope with changing fashion market is as follows. First, with the trend of borderless concept, borders between apparels are becoming vague, for example, they offer custom-made products to consumers. Second, as more enterprises take the way of gorilla and guerrilla where guerrillas who aim at niche market show up will develop. Basically, they think highly of individual creative study, and pursue the scene adherence with high sensitiveness. However this polarization becomes mutually-supplementing relationship showing gorilla's guerilla movement, and guerilla's gorilla high-tech. Third with the development of value retailing, enterprises pursuing mass merchandising of groups called category killers are expanded and amplified to new product fields, and expand business' share. Fourth, using outsourcing, the trend to use exterior function leaving each enterprise's strength by inspecting its own work is gradually strong. Fifth, with the expansion of none store sale, the entrance of the internet and the CD-ROM sales added to communication sales such as catalogues are specified. An eminent American think tank expect that 5-5% of the total sale of clothes and home goods in 2010 will be done by none store sale. Accordingly, to overcome the problems, First international, global level marketing, Second, the improvement of technology, Third, knowledge-creating marketing are needed.

• Korean journal of communication and information
• /
• v.36
• /
• pp.399-422
• /
• 2006

Whether to reduce the current 'screen quota' for domestic films in conjunction with the FTA discussions between Korea and the United States is one of the hotly debated issues in Korea. Using Toulmin's Argumentation Model, this study attempts to trace the use of data and warrants for each pro and con claims as portrayed in newspaper editorial columns and to find its rhetorical significance. A total of 67 editorial columns were collected from 9 nationwide news dailies in Korea for the purpose. The rhetorical analysis of those articles showed that the major warrants used in each pro and con opinion were absent of the potential issues of the opponents, which inherently fails to invite rebuttals from the opposite sides. This conceptual wall in each argumentation models implies an inactive conversation and subsequent absence of clash between the pro and con argumentation fields. It is thus suggested for opinion writers to find more adequate evidences to support the data and warrants to hold persuasive power of their respective claims, ultimately to enhance the public discourse among citizens.

• Management & Information Systems Review
• /
• v.22
• /
• pp.137-165
• /
• 2007

It seems high time to increase productivity by adopting e-business to overcome challenges posed by both external factors including the appreciation of Korean won, oil hikes and fierce global competition and domestic issues represented by disparities between large corporations and small and medium enterprises (SMEs), Seoul metropolitan and local cities, and export and domestic demand all of which weaken future growth engines in the Korean economy. The demands of the globalization era are for innovative changes in businessprocess and industrial structure aiming for creating new values. To this end, e-business is expected to play a core role in the sophistication of the Korean economy through new values and innovation. In order to examine business performance in e-business-adopting industries, this study analyzed the home shopping industry by closely looking into the financial ratios including the ratio of net profit to sales, the ratio of operation income to sales, the ratio of gross cost to sales cost, the ratio of gross cost to selling, general and administrative (SG&A) expense, and return of investment (ROI). This study, for best outcome, referred to corporate financial statements as a main resource to calculate financial ratios by utilizing Data Analysis, Retrieval and Transfer System (DART) of the Financial Supervisory Service, one of the Korea's financial supervisory authorities. First of all, the result of the trend analysis on the ratio of net profit to sales is as following. CJ Home Shopping has registered a remarkable increase in its ratio of net profit rate to sales since 2002 while its competitors find it hard to catch up with CJ's stunning performances. This is partly due to the efficient management compared to CJ's value of capital. Such significance, if the current trend continues, will make the front-runner assume the largest market share. On the other hand, GS Home Shopping, despite its best organized system and largest value of capital among others, lacks efficiency in management. Second of all, the result of the trend analysis on the ratio of operation income to sales is as following. Both CJ Home Shopping and GS Home Shopping have, until 2004, recorded similar growth trend. However, while CJ Home Shopping's operating income continued to increase in 2005, GS Home Shopping observed its operating income declining which resulted in the increasing income gap with CJ Home Shopping. While CJ Home Shopping with the largest market share in home shopping industryis engaged in aggressive marketing, GS Home Shopping due to its stability-driven management strategies falls behind CJ again in the ratio of operation income to sales in spite of its favorable management environment including its large capital. Companies in the Group B were established in the same year of 2001. NS Home Shopping was the first in the Group B to shift its loss to profit. Woori Home Shopping has continued to post operating loss for three consecutive years and finally was sold to Lotte Group in 2007, but since then, has registered a continuing increase in net income on sales. Third of all, the result of the trend analysis on the ratio of gross cost to sales cost is as following. Since home shopping falls into sales business, its cost of sales is much lower than that of other types of business such as manufacturing industry. Since 2002 in gross costs including cost of sales, SG&A expense, and non-operating expense, cost of sales turned out to have remarkably decreased. Group B has also posted a notable decline in the same sector since 2002. Fourth of all, the result of the trend analysis on the ratio of gross cost to SG&A expense is as following. Due to its unique characteristics, the home shopping industry usually posts ahigh ratio of SG&A expense. However, more than 80% of SG&A expense means the result of lax management and at the same time, a sharp lower net income on sales than other industries. Last but not least, the result of the trend analysis on ROI is as following. As for CJ Home Shopping, the curve of ROI looks similar to that of its investment on fixed assets. As it turned out, the company's ratio of fixed assets to operating income skyrocketed in 2004 and 2005. As far as GS Home Shopping is concerned, its fixed assets are not as much as that of CJ Home Shopping. Consequently, competition in the home shopping industry, at the moment, is among CJ, GS, Hyundai, NS and Woori Home Shoppings, and all of them need to more thoroughly manage their costs. In order for the late-comers of Group B and other home shopping companies to advance further, the current lax management should be reformed particularly on their SG&A expense sector. Provided that the total sales volume in the Internet shopping sector is projected to grow over 20 trillion won by the year 2010, it is concluded that all the participants in the home shopping industry should put strategies on efficient management on costs and expenses as their top priority rather than increase revenues, if they hope to grow even further after 2007.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.180-190
• /
• 2007

The purpose of this study was to evaluate the abrasion resistance of surface penetrating sealant which was applied on a composite resin restoration and to provide proper time to reapply sealant on composite resin surface. Two hundred rectangular specimens, sized $8\times3\times2mm$, were made of Micronew (Bisco, Inc., Schaumburg, IL, U.S.A) and divided into two groups; F group (n = 10) was finished with coarse and medium grit of Sof-Lex discs and BisCoverwas applied B group (n = 190) after finishing with discs. B group was again subdivided into nineteen subgroups From B-1 group to B-18 group were subjected to toothbrush abrasion test using a distilled water-dentifrice slurry and toothbrush heads B-IM group was not subjected to toothbrush abrasion test. Average surface roughness (Ra) of each group was calculated using a surface roughness tester (Surfcorder MSE-1700: Kosaka Laboratory Ltd., Tokyo, Japan) . A representative specimen of each group was examined by FE-SEM (S-4700: Hitachi High Technologies Co., Tokyo, Japan). The data were analysed using cluster analysis, paired t-test, and repeated measure ANOVA. The results of this study were as follows; 1. Ra off group was $0.898{\pm}0.145{\mu}m$ and B-IM group was $0.289{\pm}0.142{\mu}m$. Ra became higher from B-1 group $(0.299{\pm}0.48{\mu}m$ to B-18 group $(0.642{\pm}0.313{\mu}m$. 2. Final cluster center of Ra was $0.361{\mu}m$ in cluster 1 $(B-IM\simB-7)$, $0.511{\mu}m$ in cluster 2 $(B-8\simB-14)$ and $0.624{\mu}m$ in cluster 3 ($(B-15\simB-18)$. There were significant difference among Ra of three clusters. 3 Ra of B-IM group was decreased 210.72% than Ra of F group. Ra of B-8 group and B-15 group was increased 35.49% and 51.35% respectively than Ra of B-IM group. 4. On FE-SEM, B-IM group showed the smoothest resin surface. B-8 group and B-15 group showed vertically shallow scratches , and wide and irregular vertical scratches on composite resin surface respectively. Within a limitation of this study, finished resin surface will be again smooth and glazy if BisCover would be reapplied within 8 to 14 months after applying to resin surface.

• Journal of the Korean association of regional geographers
• /
• v.6 no.2
• /
• pp.21-40
• /
• 2000

The retail trades in many countries have changed recently according to the high quality, diversification, and marked individuality of consumer needs. Under the continually competing system of the WTO agreement, corporations based in the USA and the EU try to raise their market share in other countries so it is inevitable for Korean retail enterprises to compete with them. This paper is aimed at contributing to the efficient growth for Korean retail trade from the analysis of the development process in retail trade and its changing locations comparing Korea and the USA. Retailers in the USA have practiced diversified marketing strategies considerably in order to survive in a rapidly changing retailing environment. American retailing, which has the most advanced marketing system in the world, has been of growing concern to marketing strategies in Korea. The following is a brief summary of this study. 1. Speedy and higher quality consumption is needed in accordance with the great increase in the single-family household and the female labor force participation both in Korea and in the USA. Senior citizens have become a new consumer group due to the aging population. In the future the retail trade will switch over to diversified retail formats and internet shopping as countries are transformed into information and communication societies. 2. In Korea, the former retail system characterized by markets and department stores has been greatly changed since the late 1980s with emphasis on high quality and convenience in consumption behaviors, with large domestic enterprises and foreign distribution corporations participating in Korean retailing. In the USA, retailing mergers and takeovers by major retails, bankruptcies, and extra-large shopping centers have emerged since the late 1980s. Recently, the USA retailing formats have been changed from the lower price-oriented discount types to the large scale theme parks. Much emphasis was put on entertainment, resorts, and convention centers. On the other hand, non-store types, such as the internet shopping, the CATV shopping, as well as catalog and mail-order sales are drastically increasing, although the proportion of their sales is low up to now. 3. In Korea, most of the retail facilities are concentrated in Seoul and the Metropolitan Region, and the distribution ratio of facilities came to 52% in 1997. The periodic markets, traditional markets which open on a periodic basis, are located mainly in Chollanam-do and Kyungsangbuk-do. The large-sized discount stores have expanded their locations to the over-crowded apartment complexes in new towns, located in the Metropolitan Region, and the large provincial cities, unlike the suburban locations in the USA. Therefore we needed to give attention to the locational relations in retail facilities between Seoul & the Metropolitan Region and rural settlement areas. In the USA, urban areas grew quickly with the development of the automobile in the 1920s, and the location of stores changed from a dispersed style centering around rural areas to a centralized one in urban areas. There is an accelerated growth for suburban areas, which have grown rapidly since 1950. As the membership warehouse clubs were introduced in the 1970s, the decentralization of location was more intensified. On the other hand, inner cities were revitalized by rearranging existing facilities to cope with suburban areas. And the location-free virtual retailing & TV shopping are also growing every year. 4. In view of the above, the continuous and desirable development devices in Korean retail trade are summarized as follows: First, the countermeasures against economies of scale, increase in retailing sales, and rise of a employment percentage in retailing are in need. Second, a scheme of lowering the proportion of food retail sales, and increasing a ratio of durable goods sales need to be worked out. Third, the original ideas are needed to apply positively information, communication and technology to retailing, to graft the traditional types on modem ones based on the social culture. Fourth, strategies are needed to strengthen the competitiveness of our retail trade through cooperation and chains of smaller retailers, the large enterprises participating in the distribution industry. Fifth, in order to realize the above, the retail industry, the administration, and the academic world should support the retail segment with concern and a practical strategy plan.

• Applied Microscopy
• /
• v.29 no.2
• /
• pp.211-221
• /
• 1999

The ultrastructural changes of cuticular surface, excretory and digestive organs of Anisakis simplex larvae chronologically recovered from experimental cats were observed with a SEM and TEM. The larva recovered from an experimental cat at 3 days post-infection (PI) retained the cuticular surface with regular transverse striations and a longitudinal groove on the lateral side of body. This finding suggests that the molting of the 3rd stage larva of A. simplex to 4th one occurred from the 3rd day after infection in cats. The excretory organ (renette cell) consisted of a large cell with numerous ductules ramified from the main duct, mitochondria and secretory granules in cytoplasm. Secretory granules in the renette cell of larvae recovered at 24 hours PI were round whereas those of control and larvae recovered at 6 hours PI were amorphous. Muscular esophagus and ventriculus also retained many secretory granules in the cytoplasm. The secretory granules in these organs of larvae recovered at $6\sim24$ hours PI were electron-dense and widely distributed whereas those of control worm were packed in a pocket and retained various electron densities. In the cytoplasm of intestinal epithelial cells, numerous fine glycogen particles and mitochondria were distributed. The chronological changes of secretory granules in renette cell, muscular esophagus and ventriculus seem to be related with the worm penetration into host tissue.

• Journal of Intelligence and Information Systems
• /
• v.21 no.1
• /
• pp.143-159
• /
• 2015

Predicting IT trends has been a long and important subject for information systems research. IT trend prediction makes it possible to acknowledge emerging eras of innovation and allocate budgets to prepare against rapidly changing technological trends. Towards the end of each year, various domestic and global organizations predict and announce IT trends for the following year. For example, Gartner Predicts 10 top IT trend during the next year, and these predictions affect IT and industry leaders and organization's basic assumptions about technology and the future of IT, but the accuracy of these reports are difficult to verify. Social media data can be useful tool to verify the accuracy. As social media services have gained in popularity, it is used in a variety of ways, from posting about personal daily life to keeping up to date with news and trends. In the recent years, rates of social media activity in Korea have reached unprecedented levels. Hundreds of millions of users now participate in online social networks and communicate with colleague and friends their opinions and thoughts. In particular, Twitter is currently the major micro blog service, it has an important function named 'tweets' which is to report their current thoughts and actions, comments on news and engage in discussions. For an analysis on IT trends, we chose Tweet data because not only it produces massive unstructured textual data in real time but also it serves as an influential channel for opinion leading on technology. Previous studies found that the tweet data provides useful information and detects the trend of society effectively, these studies also identifies that Twitter can track the issue faster than the other media, newspapers. Therefore, this study investigates how frequently the predicted IT trends for the following year announced by public organizations are mentioned on social network services like Twitter. IT trend predictions for 2013, announced near the end of 2012 from two domestic organizations, the National IT Industry Promotion Agency (NIPA) and the National Information Society Agency (NIA), were used as a basis for this research. The present study analyzes the Twitter data generated from Seoul (Korea) compared with the predictions of the two organizations to analyze the differences. Thus, Twitter data analysis requires various natural language processing techniques, including the removal of stop words, and noun extraction for processing various unrefined forms of unstructured data. To overcome these challenges, we used SAS IRS (Information Retrieval Studio) developed by SAS to capture the trend in real-time processing big stream datasets of Twitter. The system offers a framework for crawling, normalizing, analyzing, indexing and searching tweet data. As a result, we have crawled the entire Twitter sphere in Seoul area and obtained 21,589 tweets in 2013 to review how frequently the IT trend topics announced by the two organizations were mentioned by the people in Seoul. The results shows that most IT trend predicted by NIPA and NIA were all frequently mentioned in Twitter except some topics such as 'new types of security threat', 'green IT', 'next generation semiconductor' since these topics non generalized compound words so they can be mentioned in Twitter with other words. To answer whether the IT trend tweets from Korea is related to the following year's IT trends in real world, we compared Twitter's trending topics with those in Nara Market, Korea's online e-Procurement system which is a nationwide web-based procurement system, dealing with whole procurement process of all public organizations in Korea. The correlation analysis show that Tweet frequencies on IT trending topics predicted by NIPA and NIA are significantly correlated with frequencies on IT topics mentioned in project announcements by Nara market in 2012 and 2013. The main contribution of our research can be found in the following aspects: i) the IT topic predictions announced by NIPA and NIA can provide an effective guideline to IT professionals and researchers in Korea who are looking for verified IT topic trends in the following topic, ii) researchers can use Twitter to get some useful ideas to detect and predict dynamic trends of technological and social issues.

• Radiation Oncology Journal
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2005

Purpose: We wanted to improve the setup reproducibility of breast cancer patients when utilizing a commercially available breast board for radiation therapy. The breast board was modified by using a new head rest and 2 types of board fixation devices. Materials and Methods: A conventional head/neck rest was modified to be positioned in various slots of the breast board, and it was fabricated 1 cm thinner to provide more comfort to a patient when the patient's neck was rotated. This rest improves the uncertainty of the daily setup. Also, the sagging problems at the left and right sides became negligible with the two types of board fixation devices: (1) the stair type, and (2) the arm type. The first device consists of an upper/lower holder with 4 stair-types of grooves and 4 rectangular Inserts. In order to cover the whole range of vertical setup of the breast board, 4 rectangular inserts were needed, and each covered 10 steps. The arm-type fixation device was also fabricated and attached to the breast board, It had two aluminum bars that were fixed by utilizing a lock-type of screw. These devises were evaluated with two volunteers in order to prove the effectiveness of the improved setup accuracy. Results; The developed cranio-caudal fixation device demonstrated that it could reduce the cranio-caudal error by nearly $55\%$ compared to the old device. As for left-and-right inclination, the stair-type and arm-type fixation devices can reduce the relative inclination by nearly $80\%$ and $90\%$, respectively, compared to the breast board without the fixation device. Conclusion: It was verified that the developed devices were effective for positioning the patients and for avoiding inclination of the breast board.