• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.511-518
• /
• 2018

This paper deals with improving speech intelligibility by applying binary mask to time-frequency units of speech in noise. The binary mask is set to "0" or "1" according to whether speech is dominant or noise is dominant by comparing signal-to-noise ratio with pre-defined threshold. Bayesian classifier trained with Gaussian mixture model is used to estimate the binary mask of each time-frequency signal. The binary mask based noise suppressor improves speech intelligibility only in noise condition which is included in the training data. In this paper, speaker adaptation techniques for speech recognition are applied to adapt the Gaussian mixture model to a new noise environment. Experiments with noise-corrupted speech are conducted to demonstrate the improvement of speech intelligibility by employing adaption techniques in a new noise environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.974-982
• /
• 2009

Photomixing techniques beating two optical signals with different wavelengths and strong correlations are also very useful techniques to make a continuous wave(CW) signals in the range of millimeter(mm) and terahertz(THz) frequencies. An optical double sideband-suppressed carrier(DSB-SC) technique is one of the popular techniques to generate two optical signals with different wavelengths and strong correlations. DSB-SC signals with strong correlations are generated by a CW modulation of an optical carrier with a local oscillator and an optical modulator. In the previous parers related the DSB-SC for producing the CW signals within the range of mm and THz frequencies, there have been no reports why the optical carrier should suppress. In order to clear that, we have analyzed and measured the characteristics of the mm-wave CW signals made by the DSB-SC photomixing in this paper. From our analysis and measurement results, compared with the case of the DSB with the maximized optical carrier, the power and phase noise have improved about 23.9 dB and 21 dBc/Hz(@ 1 MHz offset frequency) in the case of the DSB with the minimized optical carrier (that is to say, the DSB-SC). Consequently, it is evident reason that the optical carrier should sufficiently suppress to obtain the mm-wave CW signals with the high power and low noise. This paper has given very helpful data to make mm- and THz-wave CW signals using photomixing techniques with the DSB-SC because the reason why the optical carrier should be suppressed is reported in this paper based on the numerical and experimental results.

• Journal of Digital Convergence
• /
• v.11 no.7
• /
• pp.135-140
• /
• 2013

Noise estimation and detection algorithm to adapt quickly to changing noise environment using the LMS Filter. However, the LMS Filter for noise estimation for a certain period of time and need time to adapt. If the signal changes occur, have the disadvantage of being more adaptive time-consuming. Therefore, noise removal method is proposed to a frame basis AELMS Filter to compensate. In this paper, we split the input signal on a frame basis in noisy environments. Remove the LMS Filter by configuring noise predictions using the mean and variance. Noise, even if the environment changes fast adaptation time to remove the noise. Remove noise and environmental noise and speech input signal is mixed to maintain the unique characteristics of the voice is a way to reduce the damage of voice information. Noise removal method using a frame basis AELMS Filter To evaluate the performance of the noise removal. Experimental results, the attenuation obtained by removing the noise of the changing environment was improved by an average of 6.8dB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.214-216
• /
• 2019

Recently, as the use of digital equipment increases in various fields, the importance of image and signal processing is increasing. However, many kinds of noise occur in the digital signal during transmission and reception, and this noise greatly affects the final output of the system. In this paper, we propose an algorithm that effectively restores the image by removing noise according to pixel similarity in a mixed noise environment with impulse noise and AWGN. The proposed algorithm sets the reference value according to the noise type and applies the filtering to pixels similar to the reference value to obtain the final output. Simulation results show that the proposed algorithm has good noise canceling performance and compared with conventional methods using PSNR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1417-1427
• /
• 2001

본 논문에서는 밀리미터파를 이용하여 사용자에게 양방향 무선 멀티미디어의 구현을 가능케 하는 LMDS 송수신 모듈을 설계, 구현하였다. 제작된 LMDS 송수신 모듈은 신서사이져, 혼합기, 저잡음 증폭기, 고출력 증폭기, 듀플렉서 등으로 구성하였으며, 전체적으로는 전원부와 제어부를 통하여 이상여부를 감시하며, 송수신 모듈에 이상이 발생했을 때 이를 보호할 수 있도록 구현하였다. 여기서 DAVIC 표준에 맞도록 IF부 대역은 0.95∼1.45GHz의 500MHz 대역폭에서 동작하도록 제작하였고, 상하향 혼합기는 격리도 특성을 최대화하였으며, 이를 위해 하이브리드 링형을 이용한 다이오드 평형 구조를 적용하여 설계하였다. 혼합기로 주입되는 Local 주파수는 안정도가 높아야 함으로 유전체 공진형 발진기로 구현하였다. 또한 저잡음 증폭기와 고출력 증폭기는 정보통신부에서 공고한 3사 주파수 대역을 모두 수용할 수 있도록 24GHz∼26.5GHz의 대역에서 정상적인 동작을 할 수 있도록 설계하였으며, 특히 저잡음 증폭기는 잡음 환경에서 작은 신호를 손실 없이 얻을 수 있도록 잡음지수를 최소화하고, 30dB 이상의 충분한 이득이 구현되도록 하였다. 고출력 증폭기는 15dBm 이상의 출력을 송신하면서도 선형성에 문제가 없도록 혼변조왜곡(IMD) 특성을 고려하여 설계하였다. 그리고 듀플렉서는 우수한 주파수 선택도와 낮은 삽입손실 특성을 갖도록 송수신 필터 모두 5개의 공진기를 포함한 Chebyshev형 구조를 갖으며 생산성이 뛰어난 모노리딕형으로 구현하여, LMDS 송수신 성능을 구현하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.461-470
• /
• 1996

In this paper, the average probability of bit error of direct sequence spread spectrum multiple access (DS/SSMA) communication system is derived over frequency-selective rician fading channels with Gaussian and impulsive noise. Multiple access interference due to K asynchronous users transmitting simultaneously is computed using the characteristic function method, and compared with Gaussian approximation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.848-852
• /
• 2001

The biomedical signals such as ECG, EMG, EEG, and etc are very Important information to diagnose patients The signal is hard to filter the noise because that is mixed with a lot of noise and biomedical signal has the properties of nonlinear and time-variance. So, we will filter under the measure environment for system or patient. But the general adaptive fillet has brought on the distortion of signal because the adaptive filter adjust the filter coefficient with the fixed order of filter, that filter has the unsuitable order in each other environment. So we propose the dynamic structure adaptive filter that is used for improving that disadvantage. In experiment, we obtain the optimal order of adaptive filter and have food results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.944-950
• /
• 1993

Diodes and GaAs have been commonly used in a mixer design until recently. However, diodes are not preferred to use at the front-end of DBS receiver due to the conversion loss large noise. HEMT has larger conversion gain and better noise characteristics comparing with GaAs MESFET. This paper describes the design procedure, structure, and performance of a mixer, utilizaing HEMT designed by OKI Co. . A mixer configuration in which the local oscillator(LO) signal is applied to the gate is used. When the LO power is 0.01 dBm, the conversion gain of 3.7dB is obtained at IF and the 3 dB bandwidth is 400MMz.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.250-256
• /
• 2002

Resistivity tomography has become an important tool to image underground resistivity distribution. This method has been widely applied to site investigation for engineering and environmental purpose. In resistivity tomography, various electrode arrays can be used and each array has both merits and demerits. For example, the pole-pole array has high signal to noise ratio (S/N ratio), but its resolution is too low. The dipole-dipole array has low S/N ratio, but its resolution is very high. The Pole-dipole may has intermediate Snf ratio and resolution. The modified Pole-dipole array, recently proposed, shows reasonable S/N ratio and resolution, which are comparable to the pole-dipole array. These electrode arrays except the pole-pole array, however, have the problem that the apparent resistivity can diverge at some special electrode Positions. Also, the Pole-Pole array may not reflect the doe resistivity of an anomalous body. In this study, we propose a new electrode array, mixed array, where pole-dipole and modified pole-dipole ways are selectively used with the relative positions of current and potential electrodes. The mixed array has the same level of S/N ratio and resolution as the pole-dipole array and the apparent resistivity does not diverge in the receiver hole. Furthermore, the apparent resistivity using the array can reflect the true resistivity of the anomalous body.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.61-68
• /
• 2015

Noise reduction is necessary to compensate for the degradation of recognition performance by various types of noises. Among many noise reduction techniques using microphone array, generalized sidelobe canceller (GSC) has been widely applied to reduce nonstationary noises. The performance of GSC is directly affected by its adaptation mode controller (AMC). That is, accurate target speech detection is essential to guarantee the sufficient noise reduction in pure noise intervals and the less distortion in target speech intervals. Thus, this paper proposes an improved AMC design technique in which the power ratio of the output of fixed beamforming to that of blocking matrix is calculated frequency bandwise and probabilistically modeled by mixture Gaussians for each class. Experimental results show that the proposed algorithm outperforms conventional AMCs in receiver operating curves (ROC) and output SNRs.