• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.8
• /
• pp.1084-1089
• /
• 2008

This study was carried to investigate the proximate compositions, capsacinoids, organic acid of various red pepper (Capscium annuum L.) seeds. Twenty domestic varieties of red pepper seeds cultivated in Korea and four foreign varieties of samples cultivated in New Mexico, USA were analyzed. In proximate composition of the various red pepper seeds, ash content showed a range of $3.11{\pm}0.03{\sim}3.77{\pm}0.01%$, and protein content showed a range of $13.25{\pm}0.01{\sim}16.53{\pm}0.08%$. On the other hand, crude lipid content showed wide range distribution of $18{\sim}30%$ and total dietary fiber showed a range of $40{\sim}65%$. Capsaicin content of various red pepper seeds showed $0.09{\pm}0.04{\sim}5.32{\pm}0.14\;mg%$ and dihydrocapsaicin was $0.00{\sim}2.17{\pm}0.18\;mg%$. Capsaicin content was higher than dihydrocapsaicin content. In the organic acid content, Dangchan, Chohyang and Mixed red pepper seed showed a low range of $1.6{\sim}1.9%$; in contrast, Chunhamujuk, Samgang, Ganggun, Wangdaebak, Chunhailpum, New Mexico 6 and LB-25 showed higher values of over 5%.

• Journal of Periodontal and Implant Science
• /
• v.26 no.1
• /
• pp.89-102
• /
• 1996

The goal of periodontal therapy is to regenerate the loss of periodontal attachment appratus. Current theories suggest the cells of the periodontium have the capacity, when appropriately triggered, to actively participate in restoring connective tissues, including mineralized tissues. This study was performed to define the hard tissue regeneration effect of periodontal ligament(PDL) cells in vitro and the effect of rate of the composition in gingival fibroblasts(GF) on the hard tissue regeneration capacity of PDL cells. For this study, Cell growth rate, alkaline phosphatase(Al.Pase) levels and the ability to produce mineralized nodules in co-culture of PDL cells and GF were examined. The results were as follows : 1. At 7 and 15 days, Cell growth of co-culture of PDL and GF(50 : 50) was greater than that of PDL cells or GF alone(P>0.05). 2. Measurements of ALPase levels indicated that PDL cells had significantly higher activity when compared with that of co-culture groups and GF only(p<0.05). And, ALPase activity in 10 days was higher than that of 7 days(P>0.05) 3. The tendency of formation of the mineralized nodule were observed dose-depend pattern of PDL cells. There was statistically significant difference among group 1(PDL 100%), 2(PDL 70% : GF 30%), and 3(PDL 50% : GF 50%)(P<0.01). But, there was no difference among group 3, 4(PDL 30% GF 70%), and 5(GF 100%). 4. Also, the number of nodule was greater in co-culture of PDL 70% and GF 30% than in culture of PDL 70%(P<0.05) From the above results, it is assumed that the co-culture of PDL cells and GF stimulates the cell growth, which is not that of PDL cells but GF. And, the activity of ALPase depends on the ratio of PDL cells, and ALPase may relate to the initial phase of nodule formation. Also, it is thought that the calcified nodule formation principally depends on PDL cells, is inhibited by GF, and affected by cell density.

• Composites Research
• /
• v.31 no.4
• /
• pp.122-127
• /
• 2018

Sandwich composites of carbon fiber reinforced plastic(CFRP) and polymer foam will be used to automobile and aerospace industry according to increasing importance of light weight. In this study, mechanical and heat resistance properties of sandwich composites were compared with type of polymer foam (polyethylene terephthalate(PET), polyvinylchloride(PVC), epoxy and polyurethane). All types of polymer foams were degraded to 30, 60, 120, 180 minutes in $180^{\circ}C$. After heat degradation, the polymer foams were observed using optical microscope and compressive test was performed using universal testing machine(UTM). Epoxy foam had the highest compressive property to 2.6 MPa and after thermal degradation, the mechanical property and structure of foam were less changed than others. Epoxy foam had better mechanical properties than other polymer foams under high temperature. Because the epoxy foam was post cured under high temperature. As the results, Epoxy foam was optimal materials to apply to structures that thermal energy was loaded constantly.

• Proceedings of the Korean Society for Applied Microbiology Conference
• /
• 1979.10a
• /
• pp.244.3-245
• /
• 1979

1. 수율계수 함수의 영향 : 유가 배양에 있어서 수율 계수가 제한 기질 농도의 함수일 경우에 대한 연구를 수행하였다. 사용한 수율 계수 함수는 기질 농도에 대하여 선형 함수였으며 목적함수는 중간 대사 물질의 생산량이었다. 1-가) 수율 계수 함수의 기울기가 음의 값으로 적어짐에 따라 제한 기질의 공급속도가 증가되었다. 1-나) 일반적으로 초기의 얼마 동안은 회분 배양에서와 같이 공급 속도가 거의 없었으며 그후 전환점 이후에 가서야 공급 속도가 증가하였다. 1-다) 전환점 이후에서도 처음에는 대부분의 경우에 공급속도가 음의 값으로 부터 시작하여 증가하기 시작하였다. 1-라) 어떤 경우에는 배양 초기부터 공급 속도가 양의 값으로부터 시작하였으나 곧 감소하였다가 다시 증가하는 비 단조형 변화를 보였다. 1-마) 전환점 이후에서 공급 속도가 증가하는 형태에서도 처음에는 선형 증가를 보이다가 나중에 지수적 증가를 보였다. 1-바) 위와 같은 공급 속도의 변화에 따른 발효조 내의 제한 기질 농도의 변화는 초기에는 가능한 최대치를 유지하다가 전환점 이후에는 갑자기 감소하는 형태를 취하였다. 2. 목적 함수의 영향: 목적 함수가 균체량과 생성 중간 대사물질 량의 선형 결합일 때 대하여 연구하였다. 선형 결합 계수로는 균체량과 생성대사 물질의 상대적인 값어치를 취하였다. 2-가) 허용 최대 균체 농도가 제한되어 있는 상황 하에서 생성 대사 물질의 상대적인 값이 증가 할수록 목적 함수가 증가하였다. 2-나)생성대사 물질의 상대적인 값이 증가할수록 전환점의 위치가 줄어들었다. 2-다) 생성대사 물질 상대적 값의 단위 증가에 대한 목적 함수는 균체량을 감안하지 않은 야마네박사의 결과에 수렴하였다. 2-라) 공급 속도는 상대 값이 커질수록 줄어들었다. 2-마) 균체량의 시간에 대한 곡선은 상대값이 증가할수록 감소하고 전형적인 분기점 형태의 변화를 보였다.변이 뚜렷하여 이로 인한 외임파강내의 염증성병변이 뚜렷이 나타나 있으며 와우관의 특히 기저회전에서의 유모세포의 손실이 심한 것으로 보아 중이염으로 인한 골도의 고음역에서의 손실이 발생함을 알 수 있다.A group), vinclozolin, procymidone, tetradifon cypermethrin, 그리고 fenvalerate(B group)에서는 70% 이상의 회수율을 얻었고, 20%의 ethyl acetate/hexane을 사용하여 분석한 경우는 5%나 10%의 ethyl acetate/hexane을 사용하여 분석했을 때보다 좋은 결과를 나타내어 전체 16종의 농약 중 14종에서 75% 이상의 회수율을 얻었으나, alachlor와 bifenthrin은 매우 낮은 회수율을 보여서 ethyl acetate와 hexane의 혼합용매가 이들 두 농약성분의 분석에는 적합하지 않은 용출 용매임을 알 수 있었다.NO_2의$ 급성 중독증상으로서는 눈, 코를 강하게 자극하고 폐충혈, 폐수종, 기관지염, 폐염 등을 일으킨다. 만성 중독시에는 만성폐섬유와 및 폐수종을 일으킨다. (4) $오존(O_3)$ Ozone은 자동차 배기가스에서 나오는 $NO_2$ gas 및 탄화수소와 작용하여, PAN이라는 자극성 물질을 생성시키는 광학적 Smog의 주요소로 알려져 있다. 자극적인 냄새가 있음으로 불쾌감을 주고 비, 인후점막의 전조감과 두통이 오며 폐기능을 저하시키며 더욱 진행되면 폐충혈, 폐수종 등을 일으킨다 (5) Smog에 의한 건강피해 대표적인 것이 1952.12.5~12.8까지 4일간 영국 Lon-don에서 계속된 Smog사건이며, 이 사건으로 말미암아 호흡기질환 사망율이 사건전보다 사건기간 중 혹은 사건후에 5~10배의 증가율을 보였다. 이때 Smog의 주원인은 연료의 불완전 연소에 의한 연기와 이때 발생

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.97-104
• /
• 2000

PAN-based activated carbon fibers/phenolic resin matrix composites (ACFCs) were manufactured via molding process with oxidized carbon fabrics (plain-type) and phenolic resin (resole-type) compounded by 70 : 30 wt%. The green body (as molded) was submitted to carbonization (at 100$0^{\circ}C$) in an inert environment and activation (at 700, 800, 900 and 100$0^{\circ}C$) in a $CO_2$ environment. In this work, the influence of activation temperatures was investigated in surface properties, such as pH, acid- and base-values by titration method, and in adsorption properties, i.e., specific surface area and pore structures by BET-method of the composites. Also, the pressure drops of the specimens were calibrated by ASTM. As a result, the activation temperature influenced the surface property of ACFCs. When the activation temperature was higher than 90$0^{\circ}C$, the surface was gradually developed in basic nature. And, the evolutions of specific surface area, total pore volume and pore size distribution of ACFCs could be easily confirmed the dependence on the activation temperature. Among them, well-developed pore structure from adsorption characteristics was changed of the ACFCs activated at 90$0^{\circ}C$. Also, the pressure drop was slightly decreased with increasing the temperature due to increasing the burn-off with heat treatment temperature of ACFCs.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.441-444
• /
• 2002

This study was targeted to develope a microbial consortium having high cellulase production. A filamentous fungus, strain FB01, isolated from a compost showed high ${\beta}-glucosidase$ activity especially. The strain FBOl was co-cultured with Trichoderma viride to enhance the productivity of ${\beta}-glucosidase$, changing inoculation time of one strain (FB01). The microbial consortium prepared showed the higher cellulytic enzyme production than T. viride well-known. The maximal enzyme production was obtained when the microbial consortium was cultured at $30^{\circ}C$ and pH 6.0 for 10days and the activities of CMCase, ${\beta}-glucosidase$, and avicelase were 2.0, 0.8, and 0.2 U/mL, respectively. These enzyme activities were 2, 4, and 2 times as high as those of CMCase, ${\beta}-glucosidase$, avicelase from T. viride, respectively, indicating that a synergistic interaction appeared between T viride and strain FB01. The serial subcultures by pH control increased ${\beta}-glucosidase$ production about 3.2 times. Also, enzyme production using rice-straw as a carbon source showed that the activities of CMCase, ${\beta}-glucosidase$, and avicelase were 3.69, 0.76, 0.17 U/mL, respectively, and ${\beta}-glucosidase$ activity was 1.5 times higher than that of T. viride. Consequently, microbial consortium showed the considerabely enhanced production of the cellullolytic enzymes, such as CMCase, ${\beta}-glucosidase$, and avicelase compared those of T. viride, and a favorable stability for the enzyme production even in the serial subcultures.

• Composites Research
• /
• v.16 no.3
• /
• pp.75-84
• /
• 2003

The purpose of this study is to investigate the wear properties of Saffil/Al, Saffil/A12O3/Al and Saffil/SiC/Al hybrid metal matrix composites fabricated by squeeze casting method. Wear tests were done on a pin-on-disk friction and wear tester under both dry and lubricated conditions. The wear properties of the three composites were evaluated in many respects. The effects of Saffil fibers, $\textrm{Al}_2\textrm{O}_3$ particles and SiC particles on the wear behavior of the composites were investigated. Wear mechanisms were analyzed by observing the worn surfaces of the composites. The variation of coefficient of friction(COF) during the wear process was recorded by using a computer. Under dry sliding condition, Saffil/SiC/Al showed the best wear resistance under high temperature and high load, while the wear resistances of Saffil/Al and Saffi1/$\textrm{Al}_2\textrm{O}_3$/Al were very similar. Under dry sliding condition, the dominant wear mechanism was abrasive wear under mild load and room temperature, and the dominant wear mechanism changed to adhesive wear as load or temperature increased. Molten wear occurred at high temperature. Compared with the dry sliding condition, all three composites showed excellent wear resistance when lubricated by liquid paraffin. Under lubricated condition, Saffil/Al showed the best wear resistance among them, and its COF value was the smallest. The dominant wear mechanism of the composites under lubricated condition was microploughing, but microcracking also occurred to them to different extents.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.682-690
• /
• 2014

In order to improve the thermal stability of wood plastic composites (WPC), thermal degradation behavior of WPC in this study was investigated by the addition of wood flour and fire retardant after hybridization of wood flour and ammonium polyphosphate (APP) into polypropylene (PP) matrix. Thermal degradation behavior of all formulations was analyzed with thermogravimetric analyzer under nitrogen environment at heating rate of $10^{\circ}C/min$. As the thermal degradation temperature of wood flour is lower than that of PP, char layer formed by the wood flour decreases the speed of heat transfer to PP. In addition, the char layer increases the 2nd thermal degradation temperature and decreases the 2nd thermal degradation speed. The WPC treated with APP increases the 1st and 2nd degradation temperatures. In the case of WPC with high loading level of wood flour, the 1st thermal degradation temperature and 2nd thermal degradation rate were increased by the addition of APP, and then the amount of remnants at high temperature was increased by the increase of the APP loading level. In the case of WPC treated with APP, the amount of the remnants at high temperature was increased with the increase of wood flour content from 10 wt% to 50 wt%, indicating that char formation of the APP and wood flour occurred at the same time, resulting in high thermal stability effect by the increase of wood flour content.

• Korean Journal of Poultry Science
• /
• v.11 no.2
• /
• pp.115-125
• /
• 1984

The Waste Rice Straws (W.R.S.) after cultivation with the Pleurotas Ostreatus SACCARDO was substituted for wheat bran in the broiler ration. The results of the experiment 1 and 2 obtained were summerized as follows; 1. The content of C. protein in the W.R.S. showed 1.5% higher value than that in the rice straw. No change was detected in the content of C. fat. However the content of C. fiber and N.F.E in W.R.S. decreased in comparision with those of raw rice straw. 2. The treated groups were inclned to rapid gain of body weight, especially the 4% W.R.S. group had been showed significatly higher value of gain than the control and 6% treated groups (p＜0.05 ). 3. No significant differences were observed in the amount of feet intake among experimental groups, even if the treated groups showed slightly higher intake than control group. 4. The treated groups in W.R.S. were inferior to the control group in feed intake but there were no significant differences. 5. The methionine in W.R.S. was the only amino acid which contained similar quantity of wheat brans. 6. To extend the amount of W.R.S. in broiler ration the 6% of W.R.S. was substituted for wheat bran and methionine mixture was added. No significance differences had been showed in weight gain, feed intake and feed efficiency between control and treated groups. Even though the treated groups showed more feed intake and lower weight gain in comparision with control group. 7. The methionine added group showed adverse effect in economics of production (p＜0.01) because of high cost of the methionine mixture, Therefore less than. 6% of the WRS could be substituted for wheat bran. According to the results of the experiment 1 and 2 it could be concluded that maximum use of the W.R.R. as substitute for wheat bran was less than 4% of the ration.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.208-213
• /
• 2013

The contents of raw materials which are components of mixed substrate for mushroom cultivation were analyzed to optimize the composition. The pure protein(amino acid) level of soybean meal was the highest, 44.02% followed by those of soybean curd residue(31.5%) and cotton seeds meal(30.6%). The non protein nitrogen(NPN) contents in crude protein of main nitrogen materials were 2.4% for soybean meal and 5.6% for dried soybean curd residue, while those of wheat bran and rice bran used as the carbon source were relatively higher, 17.6% compared to that of nitrogen supplying media. Crude protein content per price was 6.0 for rapeseed meal, indicating that it is high crude protein content per price. Nitrogen-free extract(NFE) considering as an ingredient for mycelial growth were high in alphacorn(72.9%) and wheat bran B(57.2%). Acid detergent fiber(ADF) was high in corncob, 51.88%, its use for cultivation of brown rot fungi including Lentinus lepideus should pay attention because the fungi lack complete lignin degradation activity.