• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.114-117
• /
• 2003

Conventional heating the heat source cause the molecules to react from the surface toward the center so that successive layers of molecules heat in turn. The product surfaces may be in danger of over heating by the time heat penetrates the material. Microwave, however, produce a volume heating effect. All molecules are set in action at the same time. It also evens temperature gradients and offers other important benefits such as selective heating. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.428-431
• /
• 2001

토목합성재료(Geosynthetics) 중 배수용으로 사용되는 재료는 기능상 유체의 흐름을 수평방향으로 유도하는 재료를 의미하며, 일반적으로 저장된 유체를 수직으로 이동시키는 필터기능을 가지는 1,000g/㎡ 미만의 지오텍스타일(geotextiles)과 수평방향의 유도로를 확보한 지오네트(geonets)를 결합시킨 지오네트 복합제품이 사용되고 있다. 이러한 배수용 토목합성재료는 쓰레기 매립장의 건설 시 침출수의 외부유출을 차단하기 위하여 설치하는 차수막인 지오멤브레인(geomembranes)을 매립된 쓰레기 하중 및 외부의 충격으로부터 보호하는 용도로 사용된다. (중략)

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.2
• /
• pp.86-92
• /
• 2000

The model using homogenization technique based on energy concept for the prediction of the failure criterion of staple fiber mixed soil was developed to increase the practice and the application of staple fiber as a reinforcement for improving soft ground. Parameters of the model are aspect ratio and volumetric content of fiber, cohesion and internal friction angle of soil, adhesion intercept and interface friction angle of soil and fiber. It is considered that the model developed in this study is applicable to the soil composed of clay, silt and sand mixed by thread types of fiber such as steel bar, steel fiber, natural fiber etc.

• Magazine of the Korea Concrete Institute
• /
• v.2 no.3
• /
• pp.65-72
• /
• 1990

Theoretical expressions were dcrived for the numher of fibers per unit cross-sectional area in fiber reinforced concrete, with due consideration given to the effects of the surrounding boundaries. The number of fibers per unit cross-sectional area in steel fiber reinforced concrete was also measured experimentally for the specimens incorporating various volume fractions of fibers of different types. Statistical evaluation of the measured value was then performed in order to assess the differences in fiber concentration at different location on tbe cross section. Degree of reorientation of steel fibers in concrete occuring during vibration was examined by com¬paring the differences in the computed and measur'ed values of the number of fibers per unit cross-sectional area.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.12
• /
• pp.35-41
• /
• 2020

Recently, underground spaces have been developed variously due to the concentration of the building structure in downtown area and reconstruction of the apartment. However, various problems such as differential settlement are occurring in the waterproof and reinforcement construction. In grouting method, which is frequently used for the ground reinforcement, quality control was performed by measuring the injection quantity of grouting materials and performing laboratory tests using boring samples, but it is difficult to determine whether the ground reinforcement has been performed properly during the construction stage. In order to solve this problem, a research is needed to carry out quality control by measuring electric resistivity after grouting is performed using grouting materials mixed with conductive materials. In this research, as a basic study of the new grouting method using conductive materials, uniaxial compression tests were performed using cement specimen with 0, 3, 5, 7% of carbon fiber to evaluate the effect of conductive material on the performance of grouting material. Based on the test results, the uniaxial compressive strength is increased with the mixed proportion of the carbon fiber increase. Furthermore, the carbon fiber can also affect on the early-strength of the grouting materials.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.62-62
• /
• 2012

지구온난화 및 환경오염의 영향으로 선진국을 중심으로한 환경규제가 심해지면서, 홈 텍스타일 분야에서는 세계 패션 트렌드 및 소비자 선호에 부응한 친환경 섬유소재 개발, 웰빙 시대에 적합한 기능성 및 고감성 제품개발을 통한 차별화가 요구되고 있다. 최근의 섬유산업의 동향도 인체에 무해한 천연적인 섬유소재에 많은 관심이 증대됨에 따라 개인의 건강 뿐만 아니라 환경을 생각하는 생활패턴인 친환경섬유의 개발이 새로운 트렌드로 떠오르고 있는 실정이다. 헴프는 일년생 식물로서 학명은 Cannabis sativa L.이다. 헴프섬유의 장점으로 내구성 및 내수성, 항균성 등이 우수한 것으로 보고되고 있으나 양질의 원료 확보, 세섬도 추출 기술 및 combing 기술 등의 부족으로 100% 헴프 세 번수 방적사의 제조가 어려워 주로 면섬유와의 혼합소재로 제조되어 왔다. 최근 들어, 친환경 소재로서 박테리아 성장 억제 기능을 가진 재생섬유인 Tencel 소재를 이용하여 stiff한 Hemp의 성질에 유연성을 추가하여 촉감을 개선함과 동시에, Tencel과 Hemp를 혼용함으로써 soft touch부터 harsh touch까지 혼용율에 의한 다양한 감성을 느끼게 함으로써 용도의 다양화 추구가 시도되어 왔다. Hemp의 거친 느낌을 완화시키고 Tencel의 박테리아 억제 기능과 Hemp의 항균기능, 방충, 탈취기능이 상호 보완되어 친환경적이고 위생적인 다용도 홈 인테리어 및 가구용 직물 등의 제품으로 Hemp/Tencel 복합사가 많이 사용되고 있다. 본 연구는 Hemp와 Tencel의 혼용율의 변화에 따른 복합사의 물리적 특성을 확인하기 위하여 천연복합 태번수 방적사 최적 사설계 이론을 적용하여 Hemp 섬유 혼용율에 따른 사의 물성분석을 함으로써 Hemp/Tencel 방적사 최적 공정 조건을 결정하기 위한 사설계 이론 결과와 실험결과를 비교 분석하고자 한다. 최적 천연 Hemp복합방적사 사설계의 이론화 및 사 물성 DB화 그리고 태번수 Hemp사의 물성분석 및 이들을 DB화 함으로써 가구용 직물로 많이 사용되는 친환경 Hemp 소재사의 방적성 향상을 꾀하고자 한다. 이를 위해서 제조한 방적사의 Dry heat shrinkage와 Wet heat shrinkage를 측정하여 확인하였고 인장시험기를 이용하여 Tenacity, Initial Modulus, breaking strain을 측정 분석하였다. 방적사의 표면 특성은 영상 현미경 시스템을 사용하여 ${\times}40$ 배율로 측정하여 확인하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.702-708
• /
• 2018

Hydrogels are natural polymer networks that can contain huge quantities of water and many cosmetical ingredients. Their hydrophilic functional groups creates a matrix, which allows high efficacy in delivering active ingredients into the skin. In industry, hydrating properties and strength of the hydrogels are of great interest in manufacturing hydrogel mask packs. We have used the cellulose in various forms such as powder, cotton fiber and cellulase treated cotton fiber to investigate the property changes of cellulose/hydrogel sheets. When 0.1% and 0.3% of cellulose powder were added to hydrogels, tensile strength of hydrogel sheets were decreased by 10% and 14% respectively. Vise versa, when 0.5 ~ 2 cm of cotton fibers were added, tensile strength of hydrogel sheets were significantly increased by about 20%. The hydrogels which contain cotton fibers also gave an excellent moisturizing effect. Especially cellolose/hydrogels containing cellulase-treated cotton fibers showed the best effect on retaining moisture content increasing upto 380% in comparison with the one containing untreated cotton as well as excellent dispersibility.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.180-188
• /
• 1982

This study was carried out to make hardboard fire retardants and to examine the properties of the hard-board treated with them. The fire retardant treatment was achieved by surface impregnation of water soluble retardant chemicals into the forming mat with 55 percent of moisture content. followed by the hot pressing process. Ammonium monophosphate, ammonium diphosphate, sodium borate, and boric acid were used as the fire retardants. Fire retardant test was carried out by using the differential thermal analysis thermogram. The results are summarized as follows: 1. Fire retardant-treated hardboard showed higher values of the specific gravity. water absoption, and flexural strength than those of untreated hardboard. Especially, the treatment of ammonium monophosphate gave the best results in the flexural strength, and a 10 gr/$ft^2$ loading of the fire retardant compound of ammonium monophoshate, ammonium diphosphate, and sodium borate drew the best flexural strength value among the three different experimental loadings of 10, 20 and 30 gr/$ft^2$. 2. There were no definite differences in moisture content between the fire retardant-treated hardboard and the untreated hardboard. 3. The fire retardant compound of ammonium monophosphate, ammonium diphosphate, and sodium borate resulted in the best fire retardancy, and its fire retardancy was increased in proportion to the increase of loading.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.24 no.2
• /
• pp.247-253
• /
• 1995

This paper was performed to investigate the changes of non-cellulosic neutral sugars composition in cell wall of persimmon fruit by treatment of cell wall degrading enzyme in vitro. Rhamnose, xylose and galactose in cell wall by polygalacturonase treatment, arabinose, galactose and rhamnose in cell wall by mixed enzyme treatment and arabinose and galactose in cell wall by ${\beta}-galactosidase$ treatment decreased, respectively. Noncellulosic neutral sugars of pectins extracted cell wall by enzyme treatments decreased and those by polygalacturonase treatment decreased remarkably. Rhamnose, arabinose and xylose in hemicellulose I of cell wall by polygalacturonase treatment were higher than those of untreated, and rhamnose and xylose in that by ${\beta}-galactosidase$ treatment were higher but arabinose, mnnose and galactose decreased. Xylose, mannose and glucose in that by mixed enzyme treatment were higher than those of untreatment and arabinose and galactose decreased. Contents of total non-cellulosic neutral sugars in hemicellulose of untreatment, and contents xylose, and glucose in hemicellulose II of cell wall by polygalacturonase treatmet decreased but those of other treatments were not changed.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.416-422
• /
• 2013

In order to incorporate silver ions into the alginate, silver-alginate was prepared with aqueous solutions of silver nitrate. In the study, the silver-alginate was prepared by blending with poly vinylpyrrolidone solutions and the electrospinning was performed by using this blend solution. Antibacterial properties of silver-alginate/PVP solutions were estimated for Escherichia coli and Staphylococcus aureus by the colony counting test. Electrospinning conditions of silver-alginate/PVP solution were the tip-to-collector distance of 22 cm, the flow rate of the solution at 0.01 mL/min, and the voltage at 26 kV. The form and size of silver-alginate/PVP nanofibers were estimated by SEM and Image J. The average diameter of the electrospun SA5P15 fibers was 124 nm and showed a narrow diameter distribution. The reduction of bacteria for SA5P15 exhibited 99.9% after 24 h.