• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.431-441
• /
• 2018

To set up the future research and development direction for Auger bit, this study analyzed publicized patent trends of Deep Cement Mixing method (DCM) in Korea, USA, Japan, and Europe. DCM method was firstly classified into wing shapes and the number of rods according to the technical scope, and secondly, classified into 8 types according to type of screw and rotation axial. A total of 2,815 patents were searched and 448 validated patents were selected through de-duplication and filtering. As a result of the analysis of the portfolio through the number of patents and growth stages, it was selected as the core technology that auger is deemed to have high growth potential and if there is a patent similar to core technology through a patent barrier analysis, the basic data is suggested to develop the design around and differentiated technologies.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2303-2308
• /
• 2007

Experiments were performed to determine the thermal (or turbulent) diffusion coefficient (TDC) and to investigate the critical heat flux (CHF) performance in the 5${\times}$5 rod bundle with 5 unheated rods which are supported by Hybrid Mixing Vane. In this study, HFC-134a fluid was used as working fluid and the fluid temperature were measured in the important subchannels. To determine the TDC value, the measured fluid temperatures were compared with the predicted values obtained from the MATRA code. The best optimized value of ${\beta}$ was found to be 0.02 by considering prediction statistics, i.e., average and standard deviations of the differences between the experimental results and code calculations. Using the best optimized value of ${\beta}$ as 0.02, the MATRA code predicts the test results of the fluid temperature within ${\pm}$1.0 % of error. According to the experimental results on CHF of 5 non-heating guide tubes, the case with non-heating guide tube showed a little good performance in terms of CHF.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.215-222
• /
• 2010

Long and slender body, like a fuel rod, oscillating in axial flow can be unstabilized even by the small cross flow which can be activated by the flow mixer or turbulent generator. It is important to include these effects of flow disturbance in dynamic stability analysis of nuclear fuel rod. This work shows how eigen frequency of a multi-span fuel rod can be changed by the swirl flow, which is discretely generated by a flow mixer. By solving a state-space form of the eigenvalue equation for a multi-span fuel rod system, the critical velocity at which a fuel rod becomes unstable was calculated. Based on the simulation results, we evaluated how stability of a multi-spanned nuclear fuel rod with mixing vanes can be affected by the coolant flow in an operating reactor core.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1592-1597
• /
• 2004

Experimental studies were carried out to confirm the turbulent enhancement of the cooling system of nuclear reactor by large scale vortex generation in nuclear fuel rod bundle. The large scale vortex motions were generated by rearranging the inclination angles of mixing vanes to the coordinate directions. Experimental studies were carried out at Reynolds Number 60,000 with hydraulic condition. Normal variations of mean velocity and turbulent intensity in the rod bundle subchannel were measured by the 2-color LDV measurement system. The turbulence generated by split mixing vanes has small length scales so that they maintain only about 10DH after the spacer grid. On the other hand, the turbulences generated by the large scale vortex continue more and remain up $25D_{H}$ after the spacer grid.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.408-413
• /
• 2003

Naphthalene sublimation technique is used to investigate the average and local heat transfer from the circular rod, and to determine the average and local heat transfer from the circular rod with and without square wing type mixing vane in axial flow. The experiments are performed for a circular rod and flat plate with and without mixing vane in wind tunnel. In comparison with flat plate and circular rod in axial flow, averaged Nusselts number is increased 2 times as the increase of Reynolds number with mixing vane. Longitudinal vortex induced by square wing type has the stronger vortex strength, so square wing type vortex generator shows an effect further in downstream.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.11
• /
• pp.1004-1011
• /
• 2000

Experimental and computational studies were carried out to confirm the turbulent enhancement of the cooling system of nuclear reactor by large scale vortex generation in nuclear fuel bundle. The large scale vortex motions were generated by rearranging the inclination angles of mixing vanes to the coordinate directions. Axial development of mean and turbulent velocities in the subchannels were measured by the 2-color LDV system. Eddy diffusivity heat flux model and $k-varepsilon$ model were employed to analyze the turbulent heat and fluid flows in the subchannel. The turbulence generated by split mixing vanes has small length scales so that they maintain only about $10 D_H$ after the spacer grid. On the other hand, the turbulences generated by the large scale vortex continue more and remain up to $25 D_H$after the spacer gird.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.73-79
• /
• 1996

현재의 원전 운용은 연료주기 비용을 최소화하여 경제성을 향상시키는 것이 세계적인 추세이다. 따라서 영광 3, 4호기 이후의 국내 원전 건설의 대부분이 될 한국 표준형 원전을 대상으로 하여, 현재 개발 중이거나 이미 실용화된 개량 원전 연료의 특성을 적용하여 실제 노심해석을 수행하고. 이에 따른 경제성 분석을 수행하였다. 노심해석은 현재의 영광 3, 4호기에 장전된 CE형 연료 및 장주기용 개량연료를 초기노심 및 평형 노심에 각각 장전하는 경우에 대하여 수행하였다. 가연성 흡수체는 현재 사용중인 Gadolinia 및 Integral Fuel Burnable Absorber(IFBA) 가연성 흡수체를 사용하여 분석하였다. 그 결과 현재의 CE형 연료에서 사용하는 0.382" 연료봉보다 0.374"의 연료봉이 중성자 경제성 측면에서 유리하며, Gadolinia보다 IFBA가 반경방향 첨두출력 계수의 제어를 쉽게할 수 있슴이 밝혀졌다. 그 외에 열적 여유도 증진을 위한 유량 혼합 날개의 채용과 고연소도를 위한 새로운 피복관 재료의 사용이 요청된다. 이상과 같은 결과는 향후 표준형 원전의 장주기용 개량연료를 위한 개발 방향으로 제시될 수 있다. 제시될 수 있다.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.6
• /
• pp.99-103
• /
• 2009

This research is the result of investigating engineering characteristics of slime generated during construction of deep mixing method. Mechanical characteristics of slime have been studied through literature review and laboratory tests of unconfined compression test, permeability test and settling tests were performed. As result of field observation of slime being generated, slime started to be produced right after flight auger was penetrated into a ground and its amount was increased in progress. Unconfined compressive strength of specimen with slime obtained from in field was measured in the range of $929.7{\sim}3,509.8kN/m^2$ and the value of unconfined compressive strength was found to be changed significantly with mixing ratio of soil, cement and binder. Permeability of them was measured in the range of $4.53{\times}10^{-7}{\sim}6.62{\times}10^{-6}cm/sec$ so that the mixture was appropriate as a impervious barrier. It was also know that the value of permeability was changed with the mixing ratio of binder. As test results of solidifying slime specimen prepared in the laboratory, good quality of cement mixture with coarse soil of sand were produced, compared with fine soils of silt and clay.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.685-699
• /
• 2013

This study was evaluated the effect of attractant or repellent plants for establishing push-pull strategy for insect pest management of organic Chinese cabbage cultivation. The attractant or repellent effect of Ten plants, marigold, rye, Chinese chive, lettuce, chicory, Nongwoo-chicory, crown daisy, Treviso, green leaf mustard, and red leaf mustard were evaluated against diamondback moth, striped flea beetle, aphids, brown-winged stink bug and cabbage stink bug in organic Chinese cabbage field in Seosan in 2012. Of the ten repellent or attractant plants, rye and chicory attracted significantly brown-winged stink bug and cabbage stink bug, respectively. Aphids ate attracted significantly to the rye rather than the other plants. Leaf mustard was attracted cabbage stink bug and brown-winged stink bug in order. Cabbage stink bug was attracted by only a combination of lettuce and Chinese chive. Diamondback moth, striped flea beetle, aphid, brown-winged stink bug and cabbage stink bug were significantly repelled by single or combined cultivation of crown daisies, Treviso, and leaf mustard in organic Chinese cabbage cultivation. The results above-mentioned indicate that selected insect-attractant and -repellent plants can be used as tools for integrated pest managements of Chinese cabbage.

• Journal of Mushroom
• /
• v.15 no.3
• /
• pp.150-154
• /
• 2017

A self-propelled turner was developed to produce mushroom compost at low costs and high efficiency, and the uniformity of compost produced by an excavator, compost mixer, and self-propelled turner was compared. The material of the compost was mixed with rice straw and chicken manure at a dry weight ratio of 3:1. After the final turning, internal temperature distribution, water content of the compost pile, ash ratio, and uniformity of the compost pile were examined. After the compost was completed, the water content was $69.9{\pm}0.54%$, $72.1{\pm}0.15%$, and $74.5{\pm}0.82%$, respectively. The length of rice straw was $47.5{\pm}15.4cm$, $24.9{\pm}10.1cm$, and $31.0{\pm}10.6cm$, respectively. The ash content in the dry weight of each compost was $25.0{\pm}6.2%$, $33.6{\pm}4.2%$, and $28.2{\pm}1.1%$, respectively. The deviation in the length of rice straw was affected by the linear velocity of the spinner in the compost mixer and the self-propelled turner, which were 21.5 m/sec and 9 m/sec, respectively. As a result, the most uniform mushroom compost was produced by the self-propelled turner.