• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.617-620
• /
• 2003

열분해를 이용한 폐기물의 처리가 여러 유해물질을 저감시킬 수 있다는 기대감으로 국내에서도 열분해를 이용한 폐기물 처리 관련 연구가 많이 진행되고 있다. 아울러 폐기물을 열분해 한 후에 산소를 공급하여 가스화와 동시에 잔재를 용융시키는 열분해 가스화 용융이나 예열공기와 혼합하여 고온으로 연소시키면서 잔재를 용융하는 열분해 연소 용융 등의 방식이 개발되면서 다이옥신과 소각재의 발생을 차단하는, 환경적으로는 제로 에미션(zero-emission)에 근접하는 기술에 대한 관심도 높아지고 있다.(중략)

• Electrical & Electronic Materials
• /
• v.5 no.2
• /
• pp.237-243
• /
• 1992

무독성 혼합안정제인 Zn/Ca-stearate의 방사선 안정화 효과를 증진시키기 위해서 안정화 조제로 알코올들을 PVC에 배합하여 방사선 조사하였을 때 PVC의 색차변화를 측정하여 이들 안정화 조제의 방사선 안정화 효과를 비교 검토하였다. 2가알코올에 의한 PVC 안정화 효과는 2가알코올의 주쇄길이에 비례하여 나타나고 있으나 sorbitol을 제외한 다가알코올에 의한 PVC 안정화 효과는 거의 없는 것으로 나타났다. 이들 알코올에 의한 PVC의 방사선 안정화는 2가알코올이 PVC에서 발생된 고분자 라디칼에 대한 라디칼 포착제로서 작용하기 때문인 것으로 판단된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8B
• /
• pp.691-700
• /
• 2006

Based on the destination IP address of incoming packets, the Internet routers determine next hops and forward packets toward final destinations through If address lookup. The bandwidth of communication links increases exponentially fast as well as the routing table size grows significant as the number of single host networks attached to the Internet increases. Since packets should be processed at wire-speed, the increased link speed reduces the processing time of a packet in routers, and hence more efficient and fast IP address lookup algorithms and architectures are required in the next generation routers. Most of the previous IP lookup schemes compare routing prefixes of shorter length first with a given input IP address. Since IP address lookup needs to find the most specific route of the given input, search continues until the longest matched prefix is found while it keeps remembering the current test matching prefix. In this paper, based on binary search on prefix length, we proposed a new IP address lookup algorithm which compares longer prefixes first. The proposed scheme is consisted of multiple tries with prefixes on leaves only. The trie composed of the longest prefixes is primarily searched whether there is a match with the given input. This processing is repeated for the trio of the next longer prefixes until there finds a match. Hence the proposed algorithm provides the fast search speed. The proposed algorithm also provides the incremental update of prefixes while the previous binary search on length scheme does not provide the incremental update because of pre-processing requirement. In this paper, we performed extensive simulations and showed the performance comparisons with related works.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.3
• /
• pp.285-294
• /
• 1994

Dried top and root extracts of seven different weed species, fresh top and root extracts, and various concentrations of extract (0, 5, 10 and 15%, W/V) and residue rate (0.0, 0.25. 0.5, 0.75 and 1.0%) of velvetleaf (Abutilon theophrasti Medic.) were used to study their allelopathic effects on alfalfa in the laboratory and greenhouse. Top and root aqueous extracts of common lambsquarter (Chenopodium album L.), giant foxtail (Setaria faberii Herrm), redroot pig-weed (Amaranthus retroflexus L), velvetleaf, large crabgrass (Digitaria sanguinalis L), canada thistle (Cirsium arvense L.) and prostrate knotweed (Polygonium aviculare L.) significantly inhibited germination, seedling length, weight, and vigor in alfalfa. Top growth extracts of weeds exhibited greater allelopathic effects than root extracts. Alfalfa test species, WL-320, responded significantly different to the various weed species extracts in terms of allelopathic effect. The regression slopes of various top extracts showed significant variation with respect to germination percentage. Velvetleaf (b=3.69) extracts were the most inhibitory, while large crabgrass (b=2.39) extracts had the least allelopathic effect on alfalfa. When compared the activity of fresh velvetleaf extract to that of dry velvetleaf extract, dry extract was more inhibitory to alfalfa germination and seedling growth. Germination, seedling length and weight of alfalfa were inversely proportional to the concentration of dried velvetleaf extracts. Seedling emergence and survival percentage was inhibited by velvetleaf residue mixture treatment. Also, more of the toxic effects were observed from the dried top extracts, as compared to extracts from fresh top and root. These results demonstrate the allelopathic activity of different weed species extracts and suggest that weeds may affect crop growth and development due to the inhibitory effects of allelochemicals present in weed tissue.

• Journal of Mushroom
• /
• v.14 no.2
• /
• pp.34-38
• /
• 2016

This study was performed to determine most appropriate mixed ratio of brewers dried grain to wheat bran as a nutrient supplement in the plastic vinyl bag cultivation of Grifola frondosa. In the examination of an appropriate nutrient source, the IV substrate formulation (80 : 10 : 10, oak sawdust : wheat bran : brewers dried grain) resulted in 71.6 days to harvest and the highest yield of 142.6 g/bag. On the other hand, the investigation of the optimal mixing ratio of beer waste to wheat bran showed that the III substrate formulation (80 : 5 : 15, oak sawdust : wheat bran : brewers dried grain) resulted in the least days to harvest (61.8 days), with the highest yield of 140.8 g/bag.

• Tunnel and Underground Space
• /
• v.9 no.4
• /
• pp.315-327
• /
• 1999

Rock fracture mechanics has been widely applied to blasting, hydraulic fracturing, rock slope and many other practical problems in rock engineering. But a measuring method for the fracture toughness of rock, one of the mort important parameters in fracture mechanics as an intrinsic property of rock, has not been yet well established. To obtain mode I rock fracture toughness, the more favorable disc-typed specimens such as CCNBD, SCB, chevron-notched SCB and BDT were used in this study. Rock fracture toughness under mixed-mode and mode II conditions was measured by using the STCA applied to the CCNBD specimen. Size effects such as specimen thickness, diameter and notch length on fracture toughness were investigated. From the mixed-mode results, fracture envelops were obtained by applying various regression curves. The mixed-mode results were also compared with three mixed-mode failure criteria. In each fracture toughness test, acoustic emission was measured to get the data for determining the load levels of different crack propagation patterns.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.623-629
• /
• 2017

Flow structure and mixing characteristics in a micro combustor with a multi-hole baffle were numerically studied using the Reynolds stress model. The multi-hole baffle has geometrical features to produce multiple three-dimensional vortices inside combustion chamber. When the thickness of the baffle's geometrical factors changes, variations of vortical structures occur variously. Among these vortices, the vortex generated from the fuel stream exerts a critical influence on the mixing enhancement. The three-dimensional vortical structure, in its development state, was strongly dependent on the baffle thickness. In particular, as the baffle thickness decreases to values less than the diameter of the fuel hole, the jet stream in baffle holes changes from the parabolic to saddleback profile type. The sizes of recirculation zones inside combustion chamber and the mixing state were closely affected by the structure of the jet streams.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.10
• /
• pp.1033-1040
• /
• 2011

The premixed burner is a very strong candidate for using household boiler burner system because it has high efficiency, low emission and can be used in compact boiler system. Usually, household boiler burner systems use a Bunsen burner, which consists of an inner rich premixed flame and fuel burned completely by a secondary air supply. It has a relatively long flame length and operates in a high excess of air, so it is difficult to fit such a burner into a high efficiency compact boiler. In this paper, the characteristics of a premixed combustion burner for surface media such as metal fiber, ceramic, and SUS fin were evaluated. In particular, the flow velocity over the burner surface for the cold flow characteristics of the surface material were measured and adjusted. The combustion tests were carried out by taking pictures of the flame and measuring the flame temperature. The amounts of CO and NO were measured and the characteristics of the surface burner materials, combustion chamber, and heat exchangers were evaluated for various excess air ratios and heating values.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.3
• /
• pp.461-471
• /
• 1989

For the mixed-mode crack problems the direction of crack growth, the crack path and the rational representation of fatigue crack growth rates should be studied to predict fatigue life and safety of structures. In this study, a round specimen which produce nearly identical effects in all loading directions is proposed to make an easy measurement of initial direction of crack growth. The mode I and mode II stress intensity factors of the specimen were calculated using finite element method, in which the square root singular stresses at the crack tip are modeled by means of four rectangular quarter-point eight-noded elements surrounding the crack tip. Experimental results for high strength aluminum alloy showed that the direction of mixed-mode crack growth agree well with maximum principal stress criterion as well as minimum strain energy density criterion, but not with maximum shear stress criterion. From data of fatigue crack growth rates using crack geometry projected on the line perpendicular to the loading direction it is easily established that mixed-mode fatigue crack growth in 5083-H115 aluminum alloy goes predominantly with mode I crack growth behaviors.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.367-375
• /
• 2022

In this study, the characteristics of recycled aggregate concrete according to the mixing ratio of recycled fine aggregate were analyzed by design strength to explore its use in the production of ready-mixed concrete. The results show that, depending on the ratio of recycled aggregate, the compressive strength is similar to that of normal concrete and does not deteriorate. Therefore, it is possible to achieve a strength similar to the target design strength. Furthermore, if the ratio of recycled fine aggregate for concrete is up to 25 % of the total aggregate amount (50 % of the to-tal fine aggregate), slump does not cause problems. Our findings show that the higher the de-sign standard strength, the greater the amount of powder, and management of slump reduction, unit quantity, and performance system is necessary. The obtained results show that recycled ag-gregate can be used for the production of ready-mixed concrete after adjusting its mixing ratio and concrete mix proportions.