• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.3
• /
• pp.187-190
• /
• 2006

In order to produce hemp with low cannabinoids and appropriate fiber yield, seeds of the IH3 (non drug type germplasm) and local variety (drug type cultivar) were mixed to 1:1, 2:1, 3:1 on base of seed weight ratio and cultivated for seed production. In the seed yield trial, the weight of 1000 grains were around 21 g, which was increased in proportion to the ratio of IH3 seeds but seed yield were 100 kg/10a, which were not significantly different by the seeds-mixing ratio. In fiber yield trials with seeds from seed yield trial, fiber yield ranged $193{\sim}198kg/10a$ which was not significantly different by the seeds mixing ratio but the content of THC(${\Delta}$-9-tetrahydrocannabinol) was lowered in proportion to the ratio of IH3 seeds. Variation of THC and CBD (Cannabidiol) level in the 150 plant cultivated with various seed mixing ratio reflected that the percentage of drug and intermediate type were decreased but non drug type were increased in proportion to the ratio of IH3 seeds.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.4
• /
• pp.325-332
• /
• 2016

The objective of this study was to determine the growth characteristics of cool ($C_1$) and warm season grasses ($C_2$) in pastures mixed with $C_1$ and $C_2$ suitable for grazing horses and effect of pastures mixed with tall and short grasses on the intake characteristics of horses. $C_1$ used in this study was Kentucky bluegrass, Redtop (short type grass) and tall type grasses were orchardgrass and tall fescue, respectively. The short type grass used as $C_2$ was Bermudagrass. This study had the following four treatment groups: 1) Treatment 1 (Bermudagrass + Kentucky bluegrass + Redtop) 2) Treatment 2 (Bermudagrass + tall fescue + orchardgrass) 3) Treatment 3 (Kentucky bluegrass + Redtop) 4) Treatment 4 (tall fescue + orchardgrass). There was no winterkilling or lodging problem at an altitude of 200 m. Plant heights in mixed pasture of Treatment 1, 2, 3, and 4 were 53.9, 58.2, 57.5, and 78.1 cm, respectively. Plant height was the highest in Treatment 4. Dry matter yield was in the following order : Treatment 4 > Treatment 3 > Treatment 2 > Treatment 1. In the first investigation regarding vegetation distribution, Bermudagrass ratios among grasses in Treatment 1 and Treatment 2 were 70% and 66.7%, respectively. Overall, other grasses showed poor growth. In the second investigation of vegetation distribution, Bermudagrass ratios among grasses in Treatment 1 and Treatment 2 were 80% and 60.7%, respectively. Crude protein content, neutral detergent fiber content, acid detergent fiber content, digestibility value, and nutritive values were the lowest in Treatment 4, followed by those in Treatment 1, Treatment 2 and Treatment 3.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.509-516
• /
• 2004

This study is to investigate the amount of biased estimates for heritability and genetic correlation according to data structure on marbling scores in Korean cattle. Breeding population with 5 generations were simulated by way of selection for carcass weight, Longissimus muscle area and latent values of marbling scores and random mating. Latent variables of marbling scores were categorized into five by the thresholds of 0, I, 2, and 3 SD(DSI) or seven by the thresholds of -2, -1, 0,1I, 2, and 3 SD(DS2). Variance components and genetic pararneters(Heritabilities and Genetic correlations) were estimated by restricted maximum likelihood on multivariate linear mixed animal models and by Gibbs sampling algorithms on multivariate threshold mixed animal models in DS1 and DS2. Simulation was performed for 10 replicates and averages and empirical standard deviation were calculated. Using REML, heritabilitis of marbling score were under-estimated as 0.315 and 0.462 on DS1 and DS2, respectively, with comparison of the pararneter(0.500). Otherwise, using Gibbs sampling in the multivariate threshold animal models, these estimates did not significantly differ to the parameter. Residual correlations of marbling score to other traits were reduced with comparing the parameters when using REML algorithm with assuming linear and normal distribution. This would be due to loss of information and therefore, reduced variation on marbling score. As concluding, genetic variation of marbling would be well defined if liability concepts were adopted on marbling score and implemented threshold mixed model on genetic parameter estimation in Korean cattle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.74-77
• /
• 2011

A mixing characteristics on recess length change of Gas-centered swirl coaxial injector using high-performance staged combustion rocket engine carry out study through CFD(Computational fluid dynamics). propellant phase that combined gas-liquid simulate gas-gas. In order to measure spreading angle, velocity distribution to injector exit and spray structure of propellant analyzed. Axial velocity increase by increasing recess length, but tangential velocity decrease. The result confirmed qualitative characteristics that the spreading angle decreases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.3
• /
• pp.33-41
• /
• 1993

양벽면 모두 사각돌출형조도요소가 설치된 동심 이중관내에서 생기는 비대칭 난류유동과 열전달 특성을, 열전달과 마찰계수에 미치는 조도의 합성효과를 조사하기 위해, 연구하였다. 이론해석에서는 한쪽면에 거칠기가 있는 평행평판의 유동에 대한 수정 플란틀 혼합길이(mixing length)이론의 난류 모델을 속도분포와 마찰계수를 구하는데 사용하였다. 최대속도지점에서 안쪽과 바깥쪽의 두 속도형상들은 힘의 평형에 의해 일치시켰다. 그리고 나서, 온도 분포와 열전달 계수를 계산하였다. 속도형성과 마찰계수들의 해석결과는 실험과 매우 잘 일치하였다. 마찰계수와 Nusselt number에 미치는 조도비, 조도에 대한 피치비, 그리고 반경비등과 같은 여러 변수들의 효과들을 조사하였다. 본 연구는 일정의 조도 요소들이 전체적 효율 측면에서 볼때 유리하게 열전달을 향상시킨다는 것을 증명하였다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.7
• /
• pp.350-359
• /
• 2017

Premixed burner is a very strong candidate in household condensing gas boiler burner system because it has low CO and NOx emission with high thermal efficiency. The objective of this study was to determine combustion characteristics of cylindrical premixed burner using different baffle plate and flame holes. Results showed that cylindrical premixed flame mode could be changed into lift-off flame, blue flame, red flame, and green flame with increasing equivalence ratio. In particular, blue flame was found to be very stable at heating load of 8,82~35,280 kcal/h. NOx emission was under 26 ppm between 0.775 to 0.813 of equivalence ratio. CO emission was under 58 ppm under the same equivalence ratio. Thermal efficiency, a very important index in condensing gas boiler, was found to be above 90.13% under the same equivalence region.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2376-2384
• /
• 1992

A theoretical analysis is carried out to predict the characteristics of transient ignition phenomena for the spherical fuel droplets cloud with non-uniform droplet size and number density distribution. Numerical calculations are performed for various cases depending on the combinations of the major parameters such as ambient temperature and initial distributions of droplet size and number density. The results of present study show that the ignition delay decreases for higher ambient temperature and smaller droplet size. Droplets cloud of hollow type with outer concentrated distribution ignites most rapidly.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.15-23
• /
• 1998

In this paper, distributed mixer is studied at microwave frequency. The circuit of distributed mixer composed of gate 1,2, drain transmission lines, matching circuits in input and output terminal, DGFET's. For impedance matching of input and output port at higher frequency, image impedance concept is introduced. In distributed mixer, a DGFET's impedances are absorbed by artificial transmission line, this type of mixer can get a very broadband characteristics compared to that of current systems. A RF/LO signal is applied to each gate input port, and are excited the drain transmission line through transcondutance of the DGFET's. The output signals from each drain port of DGFET's added in same phases. We designed and frabricated the distributed mixer, and a conversion gain, noise figure, bandwidth, LO/RF isolation of the mixer are shown through computer simulation and experimentation.

• The Korean Journal of Applied Statistics
• /
• v.7 no.2
• /
• pp.225-237
• /
• 1994

A generalized likelihood ratio test is developed to detect an outlier associated with monitoring nuclear proliferation. While the classical outlier detection methods consider continuous variables only, our approach allows both continuous and discrete variables or a mixture of continuous and discrete variables to be used. In addition, our method is free of the normality assumption, which is the key assumption in most of the classical methods. The proposed test is constructed by applying the bootstrap to a generalized likelihood ratio. We investigate the performance of the test by studying the power with simulations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.6
• /
• pp.814-822
• /
• 2012

To improve the flow and mixing characteristics of marine SCR system, two different mixer including up-down and swirl type mixer were considered. The purpose of this study is to analyse turbulence intensity and uniformity index in detail and to improve the performance of SCR with respect to the mixer structure. The results showed that, the concentration uniformity index is improved by about 5% with the utilization of both mixers in the front of catalyst part. Although the RMS value and relative turbulence intensity increased after the up-down type mixer, it could observed that the value of two parameters decreased with the flow proceeding forward to the downstream. For the case of swirl type mixer, the decrease of RMS value and relative turbulence intensity were relatively smaller than that of up-down type mixer, and uniform distribution of relative turbulence intensity was observed. As a results, it could be concluded that the mixing effects and the distance of the two kinds of mixer were different.