• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.9 no.2
• /
• pp.147-152
• /
• 2006

Purpose: Efficacy of the new rotavirus vaccines ($Rotarix^{(R)}$, $RotaTeq^{(R)}$) recently developed can be affected by the rotavirus genotypes prevalent in communities. We performed this study to identify the recent distribution of rotavirus genotypes prevalent in Jeju. Methods: Genotyping of human rotaviruses was performed using 81 samples collected from 154 inpatients and outpatients with rotavirus gastroenteritis at Cheju National University Hospital between July 2005 and June 2006. All six (1, 2, 3, 4, 8, 9) G serotypes were identified by amplification of segments of the gene for VP7 using the reverse transcription-polymerase reaction (RT-PCR). Results: The results of RT-PCR for 81 samples were all positive. G typing of the VP7 protein showed that G1 was the most dominant circulating genotype (65.5%) followed by G2 (14.8%), G3 (13.6%), G8 (1.2%), G9 (1.2%), G4 (0%), and a combination of G1/G3 (3.7%). Conclusion: This distribution of rotavirus VP7 genotypes in Jeju is different from that in other domestic areas; the most dominant circulating genotype was G1.

• Korean Journal of Plant Taxonomy
• /
• v.52 no.2
• /
• pp.85-96
• /
• 2022

The plant "Hong-do-go-deul-ppae-gi" has been considered as Crepidiastrum × muratagenii, a hybrid between C. denticulatum and C. lanceolatum, based on its morphological traits and geographical distribution. To reveal the hybrid origin of Hong-do-go-deul-ppae-gi, we examined additional morphological traits of this plant and its putative parents (C. denticulatum, C. lanceolatum, C. platyphyllum) and analyzed one nuclear ribosomal internal transcribed spacer (ITS) region and four chloroplast regions (trnT-L, trnL-F, rpl16 intron, and rps16 intron). As a result of examining the morphological traits, putative hybrid individuals were classified into three types based on the habit, cauline leaf, outer phyllary, and achene beak traits. A molecular analysis found that the ITS sequences of Type 1 and Type 2 individuals showed additive species-specific sites of C. denticulatum and C. lanceolatum. Plastid sequences of Type 1 and Type 2 individuals showed C. denticulatum and C. lanceolatum sequences, respectively. However, Type 3 individuals had ITS and plastid sequences corresponding to C. denticulatum. Accordingly, Type 1 and Type 2 individuals not only share morphological traits with C. denticulatum and C. lanceolatum but also show additive species-specific sites for C. denticulatum and C. lanceolatum, and not C. platyphyllum, supporting its origin as a hybrid between C. denticulatum and C. lanceolatum. Type 3 had morphological traits similar to other hybrid types but was distinguished with respect to outer phyllaries and demonstrated some resemblance to C. denticulatum. In a molecular analysis, Type 3 was found to be identical with regard to the sequence of C. denticulatum and was judged to be an ecological variation of C. denticulatum.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.39-45
• /
• 2004

Experiments were performed in a two-phase swirling spray facility that has been described elsewhere. Measurements of spray transport and drop size distribution are analyzed over wide ranges of air to liquid mass flow ratios, utilizing four different internal mixing pneumatic nozzles. The spatial distributions of mean velocities. fluctuating velocities, and velocity-diameter correlation were quantitatively analyzed. Also, the exponential correlation curves were obtained with ALR along the spray centerline, which indicated an approximately identical formulation regardless of ALR. It indicated that the atomization characteristics were remarkably superior in the case of 30o of swirl angle with higher ALR. Among other things. nozzle configuration is one of the significant parameters affecting spray phenomena from an internal mixing nozzle. Turbulence intensities are increasingly degenerated with an increase of nozzle configuration, allowing a rapid increment of drop size distribution.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.976-980
• /
• 2005

자연하천과 같은 사행수로에서 발생하는 이차류는 흐름 분포를 왜곡시킴으로써, 유사이동, 하상과 제방침식, 하천의 지형변형 등에 매우 큰 영향을 미치게 된다. 또한, 이차류는 주 흐름방향에 수직으로 발생하기 때문에 자연하천에 유입된 오염물의 횡방향 혼합에도 지대한 역할을 한다. 따라서, 본 연구에서는 사행수로에서 이차류의 특성을 정량적으로 분석하고자 중심각이 $120^{\circ}$인 두 개의 만곡부로 이루어진 사행수로에서 실험을 수행하였다. 실험수로는 직사각형 단면과 자연형 단면 두 가지 형태로 제작하였으며, 자연형 단면 하상은 베타함수를 이용하여 제작하였다. 이차류의 정확한 측정을 위해 3차원 유속측정 장치인 micro-ADV를 이용하였다. 실험조건으로는 직사각형 단면과 자연형 단면에서 평균수심과 유량을 달리하여 실험을 총 12회 수행하였다. 실험결과, 직사각형 단면수로에서의 주 흐름의 최대유속선은 수로의 가장 짧은 경로를 따라 발생하였는데, 이는 Shiono와 Muto (1998)의 결과와 일치한다. 자연형 단면 수로에서의 주 흐름은 직사각형 단면 수로에서의 주 흐름 거동과 비슷한 양상을 보였다. 이것은 실제 자연하천 만곡부에서의 주흐름 거동(최대유속선이 최심선을 따라 발생)과는 상이한 결과였다. 그 첫째 원인은 실험수로의 조도가 일반적인 실제하천의 조도를 상사법칙에 맞게 계산한 값보다 작았기 때문이다. 그리고 두 번째 원인은 실험수로의 하폭대 수심비율은 실제하천의 하폭대 수심비율보다 컸기 때문인 것으로 사료된다. 이차류의 정량적인 분석을 위해 각 측정지점별로 횡방향, 수심방향 유속을 그려본 결과, 직사각형 단면에서는 하나의 셀이 존재하는 반면에 자연형 단면에서는 셀이 두개 존재함을 알 수 있었다. 이는 자연하천에서도 발견되는 현상이다. 실제 자연하천에서는 주 셀이 바깥제방 셀보다 큰 형태를 보이지만, 실험수의에서의 셀의 형태는 주 셀보다 바깥제방 셀이 더 크게 발생하는 것으로 밝혀졌다. 이는 앞서 언급한 바와 같이 조도가 작음으로 인한 것으로 판단된다. 이차류 강도를 계산한 결과, 직사각형 단면 수로의 최대값은 두 번째 만곡 유입부지점(U2)에서 가장 크게 나타났으며. 자연형 단면 수로에서 최대값은 두 번째 만곡을 조금 지난 (U4)지점에서 가장 크게 나타났다. 자연형 단면에서는 하폭 대 수심비가 커질수록 이차류강도가 크게 나왔으나, 직사각형 단면에서는 반대로 나왔다. 그리고, 자연형 단면의 이차류 강도는 직사각형 단면보다 크게 나타났다. 특히, 직사각형 단면의 이차류강도는 첫 번째 만곡부분보다 두 번째 만곡부분이 더 크게 나타나는 현상만 보였지만, 자연형 단면의 이차류 강도는 앞서 언급한 특징 외에 만곡부에서 증가하고, 직선부에서 감소하는 주기적인 형태를 보였다.

• Economic and Environmental Geology
• /
• v.34 no.1
• /
• pp.25-38
• /
• 2001

Contrasts in the style of the gold-silver mineralization in geologic and tectonic settings in Korea, together with radiometric age data, reflect the genetically different nature of hydrothermal activities, coinciding with the emplacement age and depth of Mesozoic magmatic activities. It represents a clear distinction between the plutonic settings of the Jurassic Daebo orogeny and the subvolcanic environments of the Cretaceous Bulgugsa igneous activities. During the Daebo igneous activities (about 200-130 Ma) coincident with orogenic time, gold mineralization took place between 197 and 127 Ma. The Jurassic deposits commonly show several characteristics: prominent association with pegmatites, low Ag/Au ratios in the ore-concentrating parts, massive vein morphology and a distinctively simple mineralogy including Fe-rich sphalerite, galena, chalcopyrite, Au-rich eIectrum. pyrrhotite and/or pyrite. During the Bulgugsa igneous activities (120-60 Ma), the precious-metal deposits are generally characterized by such features as complex vein morphology, medium to high AgiAu ratios in the ore concentrates, and abundance of ore minerals including base-metal sulfides, Ag sulfides, native silver, Ag sulfosalts and Ag tellurides. Vein morphology, mineralogical, fluid inclusion and stable isotope results indicate the diverse genetic natures of hydrothermal systems. The Jurassic Au-dominant deposits were formed at the relatively high temperature (about 300 to 450$^{\circ}$C) and deep-crustal level (>3.0 kb) from the hydrothermal fluids containing more amounts of magmatic waters (3180; 5-10 %0). It can be explained by the dominant ore-depositing mechanisms as CO2 boiling and sulfidation, suggestive of hypo/mesothermal environments. In contrast, mineralization of the Cretaceous Au-Ag type (108-71 Ma) and Agdominant type (98-71 Ma) occurred at relatively low temperature (about 200 to 350$^{\circ}$C) and shallow-crustal level «1.0 kb) from the ore-fonning fluids containing more amounts of less-evolved meteoric waters (15180; -10-5%0). These characteristics of the Cretaceous precious-metal deposits can be attributed to the complexities in the ore-precipitating mechanisms (mixing, boiling, cooling), suggestive of epilmesothermal environments. Therefore, the differences of the emplacement depth between the Daebo and the Bulgugsa igneous activities directly influence the unique temporal and spatial association of the deposit type.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.61-74
• /
• 2011

This is a fundamental research on use as fill material of lightweight waste such as bottom ash and tire shred. We carried out the test for particle size distribution, specific gravity, density, shear strength, permeability and vertical compression settlement, considering water content change and temperature effect of several waste materials. Bottom ash, which is lighter than soils, has similar permeability and particle size distribution to those of weathered soils. But permeability may differ depending on the particle size distribution. The shear strength aspect of bottom ash and tire shred mixed materials are similar to that of natural fill materials. In the 1-D vertical compression settlement test, we could be assured that bottom ash and tire shred mixed materials showed similar compression settlement to that of sand under actual vertical stress. Furthermore, materials including bottom ash showed smaller compression settlement than that of weathered soils in the long-term settlement test under wetting and freezing-thawing condition.

• 한국해양학회지
• /
• v.30 no.1
• /
• pp.13-26
• /
• 1995

In this paper three turbulence models including two-equation model by Blumberg and Mellor (1987), one-equation model with mixing length formula of Blackadar's (1962), and zero-equation model of Prandtl's (1925) were compared in homogeneous, unstratified channel flows. Steady flows which a steep-sided trapezoidal trench with uniform discharge, tidal flow and steady wind-driven flow in finite channels are considered in detail. Steady flows in a trench and tidal flows in a finite channel were reproduced fairly accurately and there was virtually no difference among results of three turbulence models. However, In case of steady wind-driven flow only two-equation model reproduced the important features of experimental data. the other two models underestimated the surface velocity. In tidal and wind-driven flows with negligibly small adjective and diffusive effects, the two-equation model gives rise to parabolic profile of eddy viscosity with maximum at the mid0depth, and the one and zero equation model based on Blackadar formula linear profile with maximum at the surface.

• The Korean Journal of Applied Statistics
• /
• v.35 no.1
• /
• pp.131-146
• /
• 2022

Logit models are commonly used to predicting and classifying categorical response variables. Most Bayesian approaches to logit models are implemented based on the Metropolis-Hastings algorithm. However, the algorithm has disadvantages of slow convergence and difficulty in ensuring adequacy for the proposal distribution. Therefore, we use auxiliary mixture sampler proposed by Frühwirth-Schnatter and Frühwirth (2007) to estimate logit models. This method introduces two sequences of auxiliary latent variables to make logit models satisfy normality and linearity. As a result, the method leads that logit model can be easily implemented by Gibbs sampling. We applied the proposed method to diabetes data from the Community Health Survey (2020) of the Korea Disease Control and Prevention Agency and compared performance with Metropolis-Hastings algorithm. In addition, we showed that the logit model using auxiliary mixture sampling has a great classification performance comparable to that of the machine learning models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.90-96
• /
• 2018

Tracer experiments were carried out on two laboratory modes, "without media mode" and "with media mode", to examine the hydraulic characteristics of the anaerobic fluidized bed bioreactor (AFBR). For both configurations, a formula was derived for the hydraulics and data interpretation to obtain the actual characteristics of the reactor. The dispersion model is based on the assumption that carriers are non-reacting and the dispersion coefficient is constant. The model represents the one-dimensional unsteady-state concentration distribution of the non-reacting tracer in the reactors. The experimental results showed that the media increased the mixing conditions in the reactor considerably. For the reactor without media, in the range tested, the dispersion coefficient was at least an order of magnitude smaller than that of the reactor with media. Advective transport dominates and the flow pattern approaches the plug flow reactor (PFR) regime. The dispersion coefficient increased significantly as us, the superficial liquid velocity, was increased proportionally to 0.82cm/s. On the other hand, for the reactor with media, the flow pattern was in between a PFR and a completely mixed flow reactor (CMFR) regime, and the dispersion coefficient was saturated at us=0.41cm/s, remaining relatively constant, even at us=0.82cm/s. The dispersion coefficient depends strongly on the liquid Reynolds number (Re) or the particle Reynolds number (Rep) over the range tested.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1140-1144
• /
• 2007

모래하천과 자갈하천의 하중도에 성립한 식생을 분석하여 하천복원과 복원된 하천의 사후 관리에서 요구되는 생태정보를 구축하였다. 모래하천의 하중도에는 버드나무군락, 물억새군락, 산조풀군락, 속속이풀군락, 큰개여뀌군락, 밭뚝외풀군락 등이 성립하였다. 이러한 식생자료를 서열법으로 처리한 결과, 식물의 배열은 천이경향을 반영하였고, 하중도의 미지형에 의해 결정된 지하수위 높이가 천이단계를 지배하는 것으로 판단되었다. 모래하천인 용수천의 하중도에서 상류로부터 하류를 향해 식생의 분포는 버드나무군락-물억새군락-산조풀군락-속속이풀군락의 순서를 보였다. 우점종의 생활형에 따라 이들을 구분하면, 이 순서는 목본 식물군락-다년생 식물군락-1년생 식물군락의 순서를 보였다. 이러한 식생의 배열로부터 하중도는 하류 방향으로 새로 생성되고 있음을 알 수 있었다. 자갈하천의 하중도에는 발달단계가 다른 세 개의 소나무군락과 초지가 성립하였다. 소나무군락은 유령림, 성숙목과 유령목이 혼합된 복층림, 그리고 성숙림으로 이루어졌다. 초지는 쑥, 달뿌리풀, 환삼덩굴, 소나무 실생, 황철나무 등이 산재하는 밀도가 낮은 식생으로 이루어졌다. 이러한 식생자료를 서열법으로 처리한 결과 여기에서도 식생의 배열은 천이경향을 반영하였다. 천이단계를 지배하는 요인은 홍수에 밀려온 자갈의 피복율로 나타났다. 상류로부터 하류를 향해 식생의 분포는 초지, 소나무 유령림, 소나무 복층림 및 소나무 성숙림의 순서를 보였다. 이러한 식생의 배열로부터 하중도는 상류방향으로 새로 성립하고 있음을 알 수 있었다.변지역에 거주하는 주민의 역할이 중요하며, 이에 따라 보 철거 선정 체계는 보 철거를 위해서 보 주변 지역 거주민을 설득하며, 하천의 환경 개선을 위한 합리적인 대안 제시를 목적으로 하고 있다. 선정 체계를 바탕으로 주민 협의 및 대안 제시를 통해 결정된 대상 보는 선정 체계 안에서 보 철거 영향 판단 절차에 따라서 보 철거로 인한 수문, 수리, 지형, 수질, 생태 영향을 판단하게 되며, 이와 더불어 사회 경제적인 영향을 평가하게 된다. 평가결과에 따라서 보를 완전히 철거하거나 다른 대안을 고려하여 보를 부분적으로 철거하거나 개량하게 된다.곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$