• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.227-233
• /
• 2020

The demand for porous asphalt mixtures is increasing because it has a range of functions, such as reducing traffic accidents and traffic noise. On the other hand, its application is delayed due to concerns about durability. This study examined the effects of the maximum aggregate size, temperature, and porosity of an asphalt mixture on the durability. To this end, the durability measure was set to the Cantabro loss rate. Mixtures having the same porosity of 20% and the maximum aggregate diameters of 13 mm, 10 mm, and 8 mm were tested at 20℃ and -20℃. Mixtures containing 20% and 22% voids with the same material having the same diameter were tested. With 20% porosity, there was no significant difference in durability when there was a change in the maximum aggregate size. There was a significant difference between 20℃ and -20℃, but no significant difference in durability when there was a 2% difference between 20% and 22%. The significance of this study is that the durability was presented quantitatively by tests and statistical analysis. This research will help improve the durability of porous asphalt mixtures by evaluating the factors affecting the durability quantitatively.

• Clean Technology
• /
• v.20 no.4
• /
• pp.390-397
• /
• 2014

This study was performed to investigate the effects of fluidizing media on $N_2O$ production in fluidized bed incineration of sewage sludge. The fluidized media were prepared in a form of 2 mm bead by mixing zeolite powders in our lab. Sand having 0.4 mm of the mean size showed 0.44 m/s of minimum fluidization velocity ($U_{mf}$), while the prepared zeolite media 0.5 m/s. When the ratio of fluidizing media height to the inside diameter of the incinerator (bed aspect ratio) increased from 1.4 to 3.1, it was found that $U_{mf}$ of the zeolite media was varied from 0.5 m/s to 0.7 m/s. Under the operation conditions in 1.79 of excess air ratio, $909^{\circ}C$ of bed temperature and ca. 1.65 m/s of superficial velocity, as the weight of fluidizing meadia was increased, $O_2$ concentration in the flue gas was slightly decreased, and $CO_2$ increased. Above 6 kg of fluidizing media weight (1.98 of bed aspect ratio), it was observed that $N_2O$ concentration was significantly reduced, which might result from the decomposition of $N_2O$ on the zeolite media rather than transformation of $N_2O$ to NOx. On the other hand, in a variation of the zeolite media mixing ratio to sand and bed temperature at a constant total bed height, significant difference was exhibited in $N_2O$ emission concentration according to the temperature. Considering the operation temperature in the incineration, the effective calcination temperature of the zeolite media was suggested to be around $900^{\circ}C$.

• Korean journal of applied entomology
• /
• v.16 no.2 s.31
• /
• pp.127-131
• /
• 1977

This experiment was conducted to evaluate the insect-proof netting, chemical sprays, application of attractants, fruit bagging and light trapping as the control methods of the fruit piercing moths in the orchards on reclaimed land in Sugyeri, Goksung, Chonnam Province, during June to October in 1976. The results are summarized as follows; 1. Insect-proof. netting effectively decreased fruit damage, compared as to the control, down to $9.4\%$ from $38.3\%$ in plum, $2.5\%$ from $53.0\%$ in peaches and $10.0\%$ from $29.0\%$ in grapes. 2. The control effects of chemicals varied significantly among the 7 insecticides tested: Deoclean, Naphthalene, and Thiometon were more effective to the fruit damages as low as $2.0\%,\; 3.6\%,\;and\;5.9\%$ respectively. while the fruit damage was rather high, $9.8\%$ for Demeton, $10.1\%$, for Takju +lead arsenate and $14.2\%$ for Padan. ,3. In the test with 7 attractants, the largest number of moths attracted and killed was 416.by Takju+brown sugar and the next was 307 by Takju+venegor while this number was 141 by mixed solution (see text) which is rather lower than expectation The fruit damage was lowest in Takju+honey and$5.2\%$, the next was $5.60\%$ for Takju+venegor and the highest was $12.0\%$, Takju alone. 4. Fruit bagging with polyethylene film effectively decreased the fruit damage from the inserts but brought about severe fruit rot and delay ripening. Meanwhile, paper bagging was less effective in preventing insects, resulting in $17.5\%$ fruit damage, however, gave no adverse effect other than slight Belay in ripening. 5. Light trapping was hardly expected to be a method of controlling these fruit piercing moths. However, the number of collected moths swarmed by electric light was 10.8 for can-descence, 0.95 for blue, and 0.22 for yellow light.

• Korean journal of applied entomology
• /
• v.57 no.3
• /
• pp.209-220
• /
• 2018

Mating disruption (MD) has been widely used to effectively control Grapholita molesta in apple orchards. A simultaneous mating disruption (SMD) techniques have been developed to control both G. molesta and G. dimorpha. This study was performed to determine the practical parameters to apply the SMD technique to field conditions. To determine the application amount of SMD lures, a dispenser containing 10 mg pheromone was placed at different numbers of trees in an orchard. Application at every other tree (= one dispenser per two trees) was relatively safe to expect effective MD efficiency in both wax and polyethylene (PE) formulations. One time application at the end of March was enough to maintain a year round MD efficacy against both species. A fence treatment using food trap was applied to prevent any immigratory mated females from nearby untreated regions. To enhance the food trap by adding host-derived secondary compounds, terpinyl acetate (TA) was screened to be effective to attract females of Grapholita molesta among six compounds contained in apple fruit extracts. Among different TA concentrations, 0.05% TA treatment was the most effective to attract the adults. A mixture of TA and sugar was effective to attract and kill females and called FAKT (female attract-to-kill techniques). FAKT was treated at approximately 6 m interval at the edge of the apple orchards. The females trapped by the FAKT included mated females possessing vitellogenic oocytes. SMD supplemented with FAKT maintained the high MD efficacy and significantly suppressed leaf damage induced by the two insect pests compared to control or single SMD treatment.

• Korean journal of applied entomology
• /
• v.44 no.1 s.138
• /
• pp.31-36
• /
• 2005

Adoxophyes spp. are the major rests of a pear. The larvae attack both leaves and fruits. (Z)-9-tetradecenyl acetate (Z9-14:Ac), (Z)-11-tetradecenyl acetate (Z11-14:Ac), (E)-11-tetradecenyl acetate (E11-14:Ac) and 10-methyldodecyl acetate (10me-12:Ac) have been reported as the sex pheromone components of the genus Adoxophyes. Our objective was to determine the difference in sex pheromone composition of three different A. spp. populations each from Cheonan, Sangju, and Naju area orchards in Korea. Gas chromatography (GC) analyses of pheromone gland extracts of virgin females confirmed the presence of two compounds (Z9-14:Ac and Z11-14:Ac) in Cheonan and Sangju populations, and four compounds (Z9-14:Ac, Z11-14:Ac, E11-14:Ac and tome-12:Ac) in Naju population. The Z9-14:Ac and Z11-14:Ac were detected in the ratio of 80:20 in the Cheonan population and 3:97 in the Sangju population. Females of Naju population produced sex pheromone blend consisting of Z9-14:Ac, Z11-14:Ac, E11-14:Ac and 10me-12:Ac at a ratio of 31:62:6:1. Field trapping tests in pear orchards with Z9-14:Ac and Z11-14:Ac indicated that maximum captures of the male were obtained with traps baited by 80:20 in Cheonan, 10:90 in Sangju, and 30:70 in Naju. These results suggest that there are remarkable geographical variations in the sex pheromone composition of A. spp. in pear orchards in Korea, and taxonomic classification of these species must be carefully assessed.

• Membrane Journal
• /
• v.19 no.1
• /
• pp.83-88
• /
• 2009

Poly(ether block amide) (PEBA)/poly(dimethyl-siloxane) (PDMS) blend membranes (PEBA : PDMS = 5 : 2, 6 : 1 wt%) were prepared through the solution-casting and phase inversion process in order to demonstrate their superior performance in carbon dioxide separation. PDMS and PEBA (4033) were also prepared by the same method using n-butanol as a solvent. To study the gas permeation properties, the membranes were characterized with SEM and tested with carbon dioxide and nitrogen at $35^{\circ}C$ and pressure ranging from 3 to 5 atm. In conclusion, PEBA/PDMS blend membranes were shown to have selectivity for $CO_2/N_2$ separation that is 4 to 5 magnitudes greater than that of PDMS membrane at 3 atm.

• Membrane Journal
• /
• v.28 no.1
• /
• pp.21-30
• /
• 2018

In this study, homogeneous and defect-free ceramic ultrafiltration membranes were fabricated by using the sol-gel method. A boehmite sol was synthesized and coated onto the surface of alumina hollow fiber microfiltration membranes. The effect of sol viscosity and surface tension on the coating layer homogeneity and thickness was investigated. The optimum coating repetition using pristine sol was determined to be 3 times, as the samples coated more than 4 times showed delamination. Fixing the coating repetition to 3 times, the effect of sintering temperature was also studied in this work. The samples sintered at $1000^{\circ}C$ exhibited the highest pure water permeability with the molecular weight cut-off (MWCO) of approximately 51 kDa (10 nm dextran), and the samples sintered at 600, $800^{\circ}C$ displayed the MWCO of 12 kDa (5 nm dextran). The ultrafiltration membranes prepared in this work showed competitive performance compared to the reported ceramic ultrafiltration membranes.

• Korean journal of applied entomology
• /
• v.29 no.4
• /
• pp.244-251
• /
• 1990

Three viral insecticides were differently formulated with a nuclear polyhedrosis virus isolated from Spdodoptera litura by addition of feeding attractant, anti-precipitate of polyhedra, spreading agent, and UV-protectants. Sucrose was effective for attraction of larval feeding to increase the mortality and for protection of polyhedra from inactivation by sunlight when added 1% to 5% of sucrose solution to the formulations. Contents of additives to the formulations were 0.5% in polyvinyl alcohol to prohibit the precipitation of polyhedra and 0.1% in Triton X-100 to spread and wet the formulations to the plant. Inactivation of the virus under sunlight was decreased when added 800g of white carbon to 100 L of water in the white carbon formulation and 30% of molasses to the molasses's. In the formulation of white carbon and molasses mixtures, activation of the virus was increased when mixtured 500g of the former with 10% of the latter. Three formulations were persisted their pathogenicity more than 95% of mortality at 3 days p.i. Encapsulation of the polyhedral surface was more distinctively coated with the carbon and showed more effective in the residual effects of the white carbon than others, but the molasses more attractive for larval feeding.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.126-134
• /
• 2002

Fabrication of mortar containing fly ash for high strength structural material was investigated by using a Mechanochemically Processed Cement (MPC) and/or Fly Ash (MPFA), which was compared to the specimen (at the same fabrication condition of fly ash adding contents (10, 20 and 30 wt%) and curing time (7 and 28 days)) fabricated by using Ball-mill Processed Cement (BPC) and As Received Fly Ash (ARFA) in terms with compressive strength and microstructures. Mortar specimen fabricated by using MPC and ARFA showed 5-11% higher compressive strength than that in the case of using BPC and ARFA, and mortar specimen by using BPC and MPFA represented 10-20% higher compressive strength than that for the case of using BPC and ARFA. Furthermore, mortar specimen fabricated by simultaneously using MPC and MPFA exhibited about 24% higher value of compressive strength than that for the case of using BPC and ARFA, which was considered to be synergic efficiency in increasing compressive strength. Increased compressive strength as above mentioned is considered to be caused by mutually increased affinity between cement and fly ash induced during mechanochemical Processing(MP).

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.196-199
• /
• 1997

We studied the effect of inoculation of microorganisms known to produce plant growth promoting substances, on the growth and yield of cucumber(Cucumis sativa L.), through a field experiment. The microorganisms used were isolated from the forest soil and consisted of Micrococus sp., Baccilus sustilis, Enterobacter agglomerans, Baccilus megaterium, Pseudomonas putida, Cellulomonas sp. and Staphylococus xyposus. Fotr the multiplication, microorganisms were cultured in liquid media of Pseudomonas P and Sabouraud dextrose. Inoculation of microorganisms was done by spraying the culture media after the culture of them to soil and cucumber plants, three times during the growth of cucumber at the rate of 10l/ha. The inoculation of microorganisms tended to promote the growth of cucumber plant and increase the yield of it. No sign of significant improvement of soil chemical and physical properties were observed after the harvest of crop. The population of bacteria and actinomycetes tended to be higher in the inoculated plots than in not inoculated plots, while opposite was the case in the population of fungi.