• Journal of the Korean Electrochemical Society
• /
• v.16 no.1
• /
• pp.52-58
• /
• 2013

In order to overcome the cost issue for commercialization of polymer electrolyte membrane fuel cell (PEMFC), this research was conducted for replacing platinum cathode catalyst with non-precious metal catalyst. The non-precious metal catalyst (Co-PANI-C) was synthesized by the simple reduction method with polyaniline (PANI), carbon black, and cobalt precursor without any heat treatment. Characterization of new Co-PANI-C composite catalysts was done by the measurement of X-ray diffraction (XRD) and thermogravimetric analysis (TGA) for structure analysis and performed by rotating disk electrode (RDE) and rotating ring disk electrode (RRDE) for electrochemical analysis. As a result, Co-PANI-C catalyst showed 60 mV lower on-set potential for oxygen reduction reaction (ORR) than Pt/C catalyst, but the overall reduction current of Co-PANI-C catalysts by ORR was still smaller than that of Pt/C. In addition, the ORR behavior of Co-PANI-C catalysts depending on the rotation speed of electrode and the stability of Co-PANI-C catalyst under potential cycling and the performance of fuel cell conditions are also discussed.

• Journal of Korea Water Resources Association
• /
• v.47 no.7
• /
• pp.599-614
• /
• 2014

In this study, two dimensional finite volume model was parallelized to improve computing time, which has been developed to be able to apply for the mixed meshes of triangle and quadrilateral. MPI scheme which is free from limitation of the number of cores was applied, and non-blocking point-to-point communication was used for fluxes and time steps calculation domain. The developed model is applied to analyze dam break in a L-shaped experimental channel with $90^{\circ}$ bend and Malpasset dam breach event to calibrate the consistency between parallelized model and existing model and examine the speed-up and efficiency of computing time. Computational speed-up about the size of the input data was considered by simulating 4 cases classified by the number of meshes, Consequently, the simulation results reached a satisfactory accuracy compared to measured data and the results from existing model, and achieved more than 3 times benefit of computational speed-up against computing time of existing model. Simulation results of 3 cases classified by the size of input data lead us to the conclusion that it is important to use proper size of input data and the number of process in order to minimize the communication overhead.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.2
• /
• pp.145-151
• /
• 2014

Purpose: The material properties of contact lenses were measured by varying the amounts of an initiator and a cross-linking agent that are the basis for the manufacture of contact lenses, and the drug delivery effects depending on the material properties of contact lenses were compared. Methods: Contact lens samples were manufactured using HEMA by varying the concentration of the cross-linking agent and the initiator. To investigate the changes in physical characteristics depending on the material properties, the results of the experiments on the amount of drug elution, water content, refractive index, and the amount of protein adsorption were compared. Results: For the contact lenses manufactured by varying the amount of the initiator, the water content hardly changed, and the refractive index also hardly changed. The amount of drug elution was not much affected by the changes in the initiator, but the amount of elution increased as the water content increased. The amount of protein adsorption was hardly affected by the changes in the initiator, but the amount of adsorption increased as the water content decreased. Conclusions: The changes in the properties were hardly affected by the changes in the amount of the initiator, but were significantly affected by the changes in the amount of the cross-linking agent. As the amount of the cross-linking agent increased, the water content decreased, while the refractive index increased. Also, when the water content increased, the amount of drug elution increased, while the amount of protein adsorption decreased.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.35-40
• /
• 2012

In this study, adsorption characteristics of expanded graphite (EG) were investigated by a series of batch adsorption tests using p-Xylene as a model volatile organic compounds (VOCs). After acid treatment, graphite were expanded at various temperature from $600^{\circ}C$ to $1000^{\circ}C$ for one minute. The optimal temperature was $800^{\circ}C$, where the expansion ratio reached 195 times of original volume. The BET specific surface area of EG was $92.4m^2/g$, which was only 1/10 of granular activated carbon (GAC), however the adsorption of p-Xylene by EG was almost completed within 5 minutes while that of GAC continued for 7 days because the majority of pores of EG was consisted with meso- and macro-pores. According to the Langmuir isotherm analysis, the maximum specific adsorption of p-Xylene onto EG was 24.0 mg/L with the adsorption constant of 7.94. In conclusion, the adsorption capacity of EG was much less than that of GAC due to the significantly lower specific surface area, but the first order kinetic constant was more than 500 times larger than GAC. Overall, EG might be effective where the fast adsorption is required.

• Journal of Mushroom
• /
• v.9 no.4
• /
• pp.139-144
• /
• 2011

This study was carried out to investigated mixing ratio of redginseng marc using organic waste resource for production cost-reduction of oyster mushroom. Redginseng marc were examined as substitute of cottonseed meal which was primary nutritive material of mushroom growing substrate. Total nitrogen and carbon source of redginseng marc was 45% and 2.7%, respectively and C/N ratio was 16.7. Total nitrogen source and pH of substrate mixed with redginseng marc was 4.6~4.9 and 2.5~2.8, respectively. The contents of $P_2O_5$, $K_2O$ and MgO were decreased by increasing redginseng marc, but increased at the 20% redginseng marc. The contents of CaO was increased by increasing redginseng marc, but there was no significant difference in $Na_2O$ content. The more mixing ratio of redginseng marc was increased in column test, the more mycelial growth growed slowly. Yields of fruiting body was no significant difference compared with control group by adding of 10~50% redsingeng marc instead of cottonseed meal, but decreased sharply at only 20% redsingeng marc without cottonseed meal. The L value of pileus by increasing redginseng marc decreased during mushroom harvest, but there was no significant difference in the a-value and the b-value.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.8
• /
• pp.1212-1218
• /
• 2015

The study was designed to investigate the effects of cold and conventional extrusion on antioxidant properties of extruded rice with vegetables. Moisture content and screw speed were fixed at 25% and 150 rpm. Cold extrusion and conventional extrusion were adjusted at die temperature of $80^{\circ}C$ with a $CO_2$ injection rate of 300 mL/min and $140^{\circ}C$ without a $CO_2$ injection, respectively. Pumpkin, tomato, strawberry, and green tea powder of 10% were individually blended with rice flour. 1,1-Diphenyl-2-picrylhydrazyl radical-scavenging activity of extruded pumpkin and tomato mix by conventional extrusion was higher than that by cold extrusion. Total phenolic content in extruded pumpkin, tomato, and strawberry mix by cold extrusion was higher than that by conventional extrusion. Total flavonoid content was highest (18.82 mg/g) in extruded green tea by conventional extrusion. Total carotenoid content decreased in extruded pumpkin but increased in extruded tomato. Tomato extrudates with cold extrusion had higher lycopene content than conventional extrusion. Anthocyanin content of conventional extruded strawberry was higher than that of cold extrudates. Total chlorophyll contents decreased through the extrusion process.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.570-575
• /
• 2015

The green algae have cellulose as a main structural component of their cell wall and the cellulose content in green algae is much higher than other marine algae such as brown algae and red algae. Furthermore, green algae do not contain lignin in their cell wall and store starch as food in their plastids. Thus, it was investigated that the effect of hydrothermal pretreatment process utilizing microwave irradiation for Ulva pertusa Kjellman, a division of green algae, which is expected to be utilized for bioenergy production, on the enzymatic hydrolysis. The hydrothermal temperature have an effect on the pretreatment of Ulva pertusa Kjellman, but the effect of power of microwave irradiation is negligible. The rate of enzymatic hydrolysis was increased as the hydrothermal temperature increased until $140^{\circ}C$. The enzymatic hydrolysis of pretreated Ulva pertusa Kjellman under the optimum pretreatment conditions (50 W of microwave irradiation power and $150^{\circ}C$ of hydrothermal temperature) with cellulase, ${\alpha}$-amylase, and Novozyme 188 having ${\beta}$-glucosidase acitivity resulted in the saccharification of 96 wt% of total carbohydrate in Ulva pertusa Kjellman during 3 hrs, while it took 24 hrs for the enzymatic hydrolysis of untreated Ulva pertusa Kjellman. It confirmed that the hydrothermal pretreatment was effective on Ulva pertusa Kjellman for the enzymatic hydrolysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.327-333
• /
• 2013

In order to see the stratification phenomenon in the coastal area induced by oceanographic conditions of the open sea, we analyzed the CTD (Conductivity-Temperature-Depth) data taken from the oceanographic survey on February 16~28, 2013. The stratification in Jukbyun coast was stronger than those of Sokcho and Gampo coast. Jukbyun line (104 line in the Serial Oceanographic Observation of National Fisheries Research and Development Institute) showed the anticyclonic eddy in the vertical distribution of temperature. The isotherm of $10^{\circ}C$ was concaved to the depth of 200 m in the middle station (station no. 9) of the line 104. It showed above $4^{\circ}C$ in positive temperature anomaly in the depth of 100~200 m in the middle station (station no. 9) of the line 104. This positive temperature anomaly was stretched to the coastal area with shallower depth. It is suggested that the stratification in Jukbyun coast was resulted from the onshoring of the Ulleung warm eddy. The movement of warm eddy may be act as a block to migration of cold water fishes like cod.

• Journal of the Korean Chemical Society
• /
• v.58 no.2
• /
• pp.179-185
• /
• 2014

Commercial (S)-naproxen was racemized under strong basic condition. After checking the peak position of (R)- and (S)-naproxen by analysis the recemized naproxen, optical purity of 19 commercialized naproxens sold in 2013 in Korea were examined by chiral HPLC. The Chiralcel OD-H column, ChiralHyun-LE(S)-1 column and LUX-Cellulose-1 column were used as chiral stationary phases and the mixed eluent of hexane:isopropanol:acetic acid as 100:1:0.1 was used as a mobile phase with a flow rate of 1.0 mL/min. Each data was obtained from an average value of at least three different experiments for each sample and the relative standard deviation of them appeared very small. The average optical purity values obtained from three different chiral columns were very similar and the total average optical purity value (99.32%) of nineteen commercialized naproxens used in this study were larger than those of three years ago (98.17%).

• Journal of the Korean Chemical Society
• /
• v.58 no.3
• /
• pp.277-282
• /
• 2014

The optical purity of 11 commercial dexibuprofens and 7 ibuprofens sold in Korea in 2013 were examined by chiral HPLC. The Chiralcel OD-H column and LUX-Cellulose-1 column were used as chiral stationary phases and the mixed eluent of hexane:isopropanol:acetic acid as 100:1:0.1 was used as a mobile phase with a flow rate of 1.0 mL/min. Each data was obtained from an average value of at least three different experiments for each sample and the average value of relative standard deviation of them appeared very small, 0.19%. Average optical purity value (97.5%) of eleven commercial dexibuprofens used in this study were smaller than those of 9 years ago (99.2%), but larger than four years ago (95.6%). Enantiomeric ratios of (R)- and (S)-isomers of seven ibuprofen samples used in this experiment were achieved at about 50:50 which was different with the result (44:56) from four years ago.