• Journal of Powder Materials
• /
• v.25 no.4
• /
• pp.336-339
• /
• 2018

A unique porous material with controlled pore characteristics can be fabricated by the freeze-drying process, which uses the slurry of organic material as the sublimable vehicle mixed with powders. The essential feature in this process is that during the solidification of the slurry, the dendrites of the organic material should repel the dispersed particles into the interdendritic region. In the present work, a model experiment is attempted using some transparent organic materials mixed with glass powders, which enable in-situ observation. The organic materials used are camphor-naphthalene mixture (hypo- and hypereutectic composition), salol, camphene, and pivalic acid. Among these materials, the constituent phases in camphor-naphthalene system, i.e. naphthalene plate, camphor dendrite, and camphor-naphthalene eutectic exclusively repel the glass powders. This result suggests that the control of organic material composition in the binary system is useful for producing a porous body with the required pore structure.

• Applied Biological Chemistry
• /
• v.26 no.4
• /
• pp.199-204
• /
• 1983

As a way of utilizing cheese whey to fortify sulfur-bearing amino acids to soybean protein, whey-soybean coagulum was made from whey-soy milk mixture and optimum conditions for coprecipitation of the two proteins were determined. Mixture of whey and soymilk in 1 : 1 volume ratio was coagulated at $0.005{\sim}0.5M$ of $CaCl_2$ concentration, pH $1.5{\sim}8.0$, and at $60{\sim}100^{\circ}C$, and absorbance at 500nm of filtrate from the coagulum was measured. Optimum conditions for the coprecipitation were 0.0125M of $CaCl_2$ concentration, pH $6.5\sim7.5$, and $70{\sim}80^{\circ}C$ which resulted in the minimum absorbance and also good physical properties of the curd.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.458-467
• /
• 2017

In this study, we prepared PVDF membranes via TIPS for water treatment applications. PVDF was used for its excellent chemical and mechanical properties. The effect of coagulation bath composition, temperature, and heat capacity on the overall membrane morphology was studied and observed using SEM. A mixture of DOP and DBP was used as the diluent, and silica was used as an additive. It was observed that as the heat capacity of the coagulation bath increased, the crystallization rate of PVDF decreased yielding larger pores. Also, as the heat capacity of the coagulation bath decreased, the crystallization rate of PVDF increased yielding smaller pores.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.4
• /
• pp.363-368
• /
• 1991

To fortificate protein to soybean curd, 0, 20, 40, 60 and 80% (v/v) of egg white (EW) were added to soybean milk for the soybean curd preparation, respectively. Moisture, $Ca^{2+}$, crude lipid and ash content of the curd were decreased as EW increased whereas protein content, weight and volume, $Mg^{2+},\;K^{+},\;and\;Na^{+}$ incresed, and hardness also increased. In addition, coagulating temperature and hardness were lowered as EW increased. Color and taste panel score were not significantly different (p<0.01), however, texture and flavor score were lowered over 60% (v/v) EW addition. By adding EW (20, 40, 60 and 80%), sulfur containing amino acids were enriched 0.63, 1.20, 1.76 and 2.36 times, respectively compared to the control(0%).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.12
• /
• pp.3926-3937
• /
• 1996

In recent years there has been increased interest in the continuum model associated with the solidification of binary mixtures. A review of the literature, however, shows that the model verification was not sufficient or only qualitative. Present work is conducted for the reassessment of continuum model on the solidification problems of binary mixtures widely used for model validation. In spite of using the same continuum model, the results do not agree well with those of Incropera and co-workers which are benchmark problems typically used for validation of binary mixture solidification. Inferring from the agreement of present results with the analytic, experimental and other model's numerical results, this discrepancy seems to be caused by numerical errors in applying continuum model developed by Incropera and co-workers, not by the model itself. Careful examination should be preceded before selecting validation problems.

• KSBB Journal
• /
• v.17 no.2
• /
• pp.207-211
• /
• 2002

The theophylline imprinted membrane was prepared by a wet phase inversion method. Theophylline was implanted during copolymerization of acrylonitrile with acrylic acid or implanted in the dimethyl sulfoxide solution containing10 wt% copolymer, p(AN-co-AA). Rolling the glass plate, on which the copolymer solution was cast, in water removed the sponge layer and thus made the membrane symmetric. The adsorption selectivity of the membrane toward template molecule was increased with the coagulation temperature of the membrane and the initial concentration of the theophylline and caffeine mixture.

• 월간산업보건
• /
• s.276
• /
• pp.27-31
• /
• 2011

Perfluorobutyl ethylene(PFBE)은 유기용제 혼합물에 주로 사용되는 산업화학물질로 동물에게 경구, 피부, 눈 그리고 흡입 노출되는 경우 급성 독성이 매우 낮다. Perfluorobutyl ethylene을 흰쥐에게 하루 6시간, 일주일에 5일씩 2주간을 0, 500 ppm, 5,000 ppm, 50,000 ppm을 흡입 노출시킨 연구에서 최대무작용량(no-observed-adverse effect level, NOAEL)으로 500 ppm이 결정되었으며 5,000 pm에서는 단핵 백혈구가 약간 증가하였다. 50,000 ppm에서도 병리학적 변화는 없었다. 그 후의 흡입연구는 하루 6시간, 28일간 연속적으로 흰쥐 암수에게 400 ppm, 2,000 pm, 10,000 ppm의 농도로 perfluorobutyl ethylene 증기를 노출시켰다. 최종 노출 후 흰쥐를 희생시켜 관찰한 결과, 체내 기관 무게변화를 포함한 어떠한 변화도 관찰되지 않았다. 그러나 10,000 ppm에 노출된 수컷 흰쥐 5마리 중 4마리는 작은 다중간세포질 액포가 발견되었다. Perfluorobutyl ethylene 증기 10,000 ppm에 노출된 수컷 흰쥐는 부분적으로 평균 혈액응고 촉진 시간이 감소하였다. 이 연구에서는 최대무작용량을 2,000 ppm으로 결정하였다. Perfluorobutyl ethylene의 TLV-TWA 100 ppm은 노출 후 악영향을 최소화하는데 충분한 농도이며 "피부흡수(Skin)", "감작제(SEN)" 그리고 발암성에 대한 경고주석을 설정하기에는 유용한 연구가 충분하지 않다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.1
• /
• pp.1-7
• /
• 2016

A Urea-SCR(Selective Catalytic Reactor) system, which converts nitrogen oxides into nitrogen and water in the presence of a reducing agent, creates a major exhaust gas aftertreatment system for NOx reduction among other compounds. With regard to vehicle applications, a urea solution was chosen based on its eutectic composition of a 32.5wt% urea-water solution. An important advantage of this eutectic composition is that its melting point of $-11.7^{\circ}C$ is sufficiently low to avoid solidification in cold environments. However, the storage tanks must be heated separately in case of low ambient temperature levels to ensure a sufficient amount of liquid is available during scheduled start ups. In this study, therefore, a numerical investigation of three-dimensional unsteady heating problems analyzed to understand the melting processes and heat transfer characteristics including liquid volume fraction, temperature distributions, and temperature profiles. The investigations were performed using Fluent 6.3 commercial software that modeled coolant and electric heater models based on a urea solution. It is shown that the melting performance with the electric heater is higher than a coolant heater and is more efficient.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.129-129
• /
• 2017

열전재료는 열에너지를 전기에너지로 또는 전기에너지를 열에너지로 직접 변환하는데 가장 널리 사용되는 재료이다. $Bi_2Te_3$계 열전 재료는 400K 이하의 비교적 저온 영역에서 높은 성능지수(Dimensionless Figure of merit, ZT($={\alpha}2{\sigma}T/{\kappa}$, ${\alpha}$: 제백계수, ${\sigma}$: 전기전도도, T: 절대온도, ${\kappa}$: 열전도도))를 나타내는 열전재료이며 자동차 시트나 정수기 등에 응용되고 있다. 열전모듈은 제조시 수십 개에서 수백 개 이상의 n형 및 p형 열전소자를 알루미나($Al_2O_3$)와 같은 세라믹 기판(substrate) 상에 접합된 동 전극 위에 전기적으로 서로 직렬로 접합시켜 제조한다. 기존의 열전모듈의 제조방법에는 동 전극 위에 위에 Sn합금 분말과 플럭스(flux)의 혼합물인 솔더페이스트를 스크린 인쇄법을 사용하여 동 전극에 도포한 다음, 그 위에 열전소자를 얹고 약 520K의 열풍을 가하여 솔더를 용융시켜 열전소자와 동 전극을 접합시킨다. 스크린 인쇄법에서는 인쇄 압력이 일정하지 않으면, 솔더페이스트 층의 두께가 균일하지 않게 되어 열전소자 접합부의 불량을 유발시킨다. 그러나 열모듈은 단 하나의 접합 불량이 모듈 전체의 열전변환성능에 심각한 영향을 줄 수 있기 때문에 본 연구에서는 이러한 문제점을 해결하기 위해, 솔더페이스트를 도포하지 않고 열전소자를 직접 동 전극과 접합할 수 있는 방법을 고안하였다. 무전해도금을 이용한 니켈층을 형성시킨 $Bi_2Te_3$계 열전소자 표면에 약 $50{\mu}m$의 주석도금층을 전기도금법을 구사하여 형성시켰다. 그 후, wire cutting을 통하여 $3mm{\times}3mm{\times}3mm$의 크기로 절단한 주석도금된 열전소자를 동 전극에 얹고 1.1KPa의 압력을 가하면서 523K의 핫플레이트 위에서 3분간 방치하여 직접(direct) 열압착 접합을 실시하였다. 접합부의 단면을 SEM을 이용하여 관찰한 결과, 동 전극과 열전소자 사이의 계면에 용융 후 응고된 주석층이 결함없이 균일하게 형성된 양호한 접합부를 관찰할 수 있었다. 따라서, 솔더페이스트를 이용하지 않고, 열전소자 표면에 주석도금을 실시한 후, 동 전극과 직접 열압착 본딩을 실시하는 방법은 균일한 접합계면을 얻을 수 있는 새로운 공정으로 기대된다.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.251-258
• /
• 1995

In an effort to increase the thermoelectric figure of merit by reducing the thermal conductivity, the unidirectionally solidified n-type (Bi, Pb)-Te based alloys which form a $Bi_{2}Te_{3}-PbBi_{4}Te_{7}$eutectic lamellar structure were investigated with the microstructural control at various solidification conditions. PbBi_{4}Te_{7}$ lamellae were grown on cleavage plane(0001) of $Bi_{2}Te_{3}$ and the interlamellar spacing decreased from 10.4 $\mu \textrm{m}$to 3.2$\mu \textrm{m}$ with growth velocity variation from 1.4 \times 10^{-4}$cm/sec to $8.3 \times 10^{-4}$cm/sec. Seebeck coefficient was constant, $\mid$$\alpha$$\mid$=29 $\mu$ V/K regardless of growth direction, growth velocity and temperature gradient. Electrical conductivity showed a tendency to decrease slightly with growth velocity and it parallel to growth direction was about three times as large as perpendicular direction. The figures of merit were varied differently from Seebeck coefficients and electrical conductivities depending on the growth direction, growth velocity and temperature gradients. They showed the relative increase in case of perpendicular direction compared with parallel to growth direction. It is believed to be due to the reduction of the thermal conductivity according to decrease of the interlamellar spacing.