• Journal of Life Science
• /
• v.25 no.3
• /
• pp.329-335
• /
• 2015

This study was performed to determine the optimal ratio of Petasites japonicus, Luffa cylindrica, and Houttuynia cordata, all of which are supposed to have anti-respiratory disease effects, such as against rhinitis. The experiment incorporated a mixture design and included 12 experimental points with center replicates for three different independent variables (Petasites japonicus 30~70%; Luffa cylindrica 10~30%; and Houttuynia cordata 10~30%). Based on this design, the mixture was extracted in hot water at 121℃ for 45 min and anti-allergy and anti-microbial activities were observed. The response surface and trace plot described for the anti-allergy activity showed Petasites japonicas was a relatively important factor. The correlation coefficient (R²) value 82.10% for the inhibition effect of degranulation was analyzed by the regression equation. The analysis of variance showed the model fit was statistically significant (p<0.05). The optimal ratio of the mixture was Petasites japonicus 0.75%, Luffa cylindrica 0.11%, and Houttuynia cordata 0.14%. The anti-microbial activity for each extraction of the mixture was valid on gram-positive, such as Staphylococcus aureus (KCCM 40881) and Staphylococcus epidermidis (KCCM 35494), while it was less effective on gram-negative, such as Escherichia coli (KCCM 11234) and Pseudomonas aeruginosa (KCCM 11328).

• IE interfaces
• /
• v.18 no.4
• /
• pp.402-411
• /
• 2005

Secondary batteries with high performance are essential in widespread use of modern portable devices such as cellular phones and laptop computers. High energy density, long cycle life, and safety are some of important requirements for secondary battery. To achieve such characteristics, a mixing proportion of electrolyte solution ingredients in the battery should be carefully chosen. In this paper, using statistical design of mixture experiments (DOME), we attempt to find an optimum condition of designing the secondary battery. DOME has a distinct feature in that the experimental region is represented by simplex, rather than hypercube, because the sum of blend proportions should be unity. Several designs based upon this point have been proposed for mixture experiments. Among them, an extreme vertices design is employed in this paper because there are a couple of blend constraints to be considered. In order to investigate how the mixing proportion interacts with other manufacturing factors, a fractional factorial design is also included across the extreme vertices design. As a result, we find that the blend proportion of solution ingredients has a significant effect on battery performances. By simultaneously optimizing two battery capacities, this paper proposes an optimum blend proportion according to process factor settings.

• Journal of Environmental Science International
• /
• v.29 no.8
• /
• pp.793-800
• /
• 2020

The conventional development of multi-component electrodes is based on the researcher's experience and is based on trial and error. Therefore, there is a need for a scientific method to reduce the time and economic losses thereof and systematize the mixing of electrode components. In this study, we use design of mixture experiments (DOME)- in particular a simplex lattice design with Design Expert^Ⓡ program- to attempt to find an optimum mixing ratio for a three-component electrode for the high RNO degradation; RNO is an indictor of OH radical formation. The experiment included 12 experimental points with 2 center replicates for 3 different independent variables (with the molar ratio of Ru, Ti, Ir). As the Prob > F value of the 'Quadratic' model is 0.0026, the secondary model was found to be suitable. Applying the molar ratio of the electrode components to the corrected response model results is an RNO removal efficiency (%) = 59.89 × [Ru] + 9.78 × [Ti] + 67.03 × [Ir] + 66.38 × [Ru] × [Ir] + 132.86 × [Ti] × [Ir]. The R² value of the equation is 0.9374 after the error term is excluded. The optimized formulation of the ternary electrode for an high RNO degradation was acquired when the molar ratio of Ru 0.100, Ti 0.200, Ir 0.700 (desirability d value, 1).

• Food Science and Preservation
• /
• v.16 no.4
• /
• pp.472-481
• /
• 2009

Response surface methodology (RSM) is frequently used for optimization studies. In the present work, RSM was used to determine the antimicrobial activitiesof grapefruit seed extract (GFSE) and a lactic acid mixture (LA) against Staphylococcus aureus, Bacillus cereus, Escherichia coli, Salmonella typhimurium, Pseudomonas fluorescens, and Vibrio parahaemolyticus. A central composite design was used to investigate the effects of independent variables on dependent parameters. One set of antimicrobial preparations included mixtures of 1% (w/w) GFSE and 10% (w/w) LA, in which the relative proportions of component antimicrobials varied between 0 and 100%. In further experiments, the relative proportions were between 20% and 100%. Antimicrobial effects against various microorganisms were mathematically encoded for analysis. The codes are given in parentheses after the bacterial names, and were S. aureus ($Y_1$), B. cereus ($Y_2$), E. coli ($Y_3$), S. typhimurium ($Y_4$), P. fluorescens ($Y_5$), and V. parahaemolyticus ($Y_6$). The optimum antimicrobial activity of the 1% (w/w) GFSE:10% (w/w) LA mixture against each microorganism was obtained by superimposing contour plots ofantimicrobial activities on measures of response obtained under various conditions. The optimum rangesfor maximum antimicrobial activity of a mixture with a ratio of 1:10 (by weight) GFSE and LA were 35.73:64.27 and 56.58:43.42 (v/v), and the optimum mixture ratio was 51.70-100%. Under the tested conditions (a ratio of 1% [w/w] GFSE to 10% [w/w] LA of 40:60, and a concentration of 1% [w/w] GFSE and 10% [w/w] LA, 70% of the highest value tested), and within optimum antimicrobial activity ranges, the antimicrobial activities of the 1% (w/w) GFSE:10% (w/w) LA mixture against S. aureus ($Y_1$), B. cereus ($Y_2$), E. coli ($Y_3$), S. typhimurium ($Y_4$), P. fluorescens ($Y_5$), and V. parahaemolyticus ($Y_6$) were 24.55, 25.22, 20.20, 22.49, 23.89, and 28.04 mm, respectively. The predicted values at optimum conditions were similar to experimental values.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.503-509
• /
• 2019

The demand for smaller, faster, and multi-functional mobile devices in increasing at a rapidly increasing rate. In response to these trends, Stacked Chip Scale Package (SCSP) is used widely in the assembly industry. A film type adhesive called die attach film (DAF) is used widely for bonding chips in SCSP. The DAF requires high flowability at high die attachment temperatures for bonding chips on organic substrates, where the DAF needs to feel the gap depth, or for bonding the same sized dies, where the DAF needs to penetrate bonding wires. In this study, the mixture design of experiment (DOE) was performed for three raw materials to obtain the optimized DAF recipe for low elastic modulus at high temperature. Three components are acrylic polymer (SG-P3) and two solid epoxy resins (YD011 and YDCN500-1P) with different softening points. According to the DOE results, the elastic modulus at high temperature was influenced greatly by SG-P3. The elastic modulus at $100^{\circ}C$ decreased from 1.0 MPa to 0.2 MPa as the amount of SG-P3 was decreased by 20%. In contrast, the elastic modulus at room temperature was dominated by YD011, an epoxy with a higher softening point. The optimized DAF recipe showed approximately 98.4% pickup performance when a UV dicing tape was used. A DAF crack that occurred in curing was effectively suppressed through optimization of the cure accelerator amount and two-step cure schedule. The imizadole type accelerator showed better performance than the amine type accelerator.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.167-173
• /
• 2017

Purple-fleshed potato powder (PFPP) was investigated to determine optimal mixing ratio with milk powder and dextrin to produce a ready-to-eat mashed potato powder. The rheological characteristics, color, and anthocyanin contents were studied at a different concentration of ingredients. The power-law model was applied to explain the mechanical spectra of mashed potatoes which represented the change in structure induced by different mixing ratios. Mixture design was used to obtain the experimental points used to establish the empirical models to describe the effects of each ingredient on the characteristic of the mashed potato. The results of mechanical spectra showed that both storage and loss moduli (G' and G'') were significantly influenced by PFPP and milk powder concentration. The power law parameters n' and n'' showed higher values for the mashed potato with a lower concentration of PFPP and a higher concentration of milk powder, which showed that the gel networks involved in the mashed potato were weaker. The optimum mixing ratio with the highest redness and anthocyanin content, while maintaining the rheological properties similar to the commercial mashed potato, was determined as PFPP:milk powder:dextrin = 90.49:4.86:4.65 (w/w). The proportions of PFPP and milk powder in the formulation significantly changed the characteristics of mashed potato, whereas no significant effect of dextrin was observed in this formulation.

• Korean journal of food and cookery science
• /
• v.28 no.1
• /
• pp.67-76
• /
• 2012

This study examined the optimal ingredient mixing ratio for the preparation of steamed cake containing mugwort (Artemisia princeps var. orientalis) powder. After preliminary studies, the following ingredient ranges were determined; 110~129% sugar, 3~8% mugwort powder, 10~25% oil. Among the different mixture designs, the D-optimal design was chosen for analysis. The results of F-test, specific gravity, viscosity, volume and color values (L, a, b), hardness decided a linear model, while the sensory characteristics (color, taste, texture and overall acceptance) decided a quadratic model. The fitness analysis results showed that in all characteristic, the probabilities were significant within 0.05%; thus, the models were accepted as appropriate. The response surface and trace plot results showed that increasing amounts of mugwort powder decreased the brightness, and increased redness and yellowness. As the level of added oil increased, the softness of the cake increased. Cake samples received low sensory evaluation scores when sugar, mugwort powder, and oil were added above their optimal levels. The optimum formulations by the numerical and graphical methods, were similar, and with the numerical method presented as: sugar, mugwort powder, and oil at 120.7%, 5.1%, and 16.2%, respectively(flour weight basis). The above results demonstrate the feasibility of adding mugwort powder to sponge cake, and therefore, the commercialization of mugwort powder cake marketed as a functional food is deemed possible.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.2
• /
• pp.218-226
• /
• 2013

This study examined the optimal mixture ratio of rice gruel supplemented with puffed rice by mixture design. The quality characteristics of rice gruel samples were examined according to mixture ratios at eleven experimental points. The high soluble solid content and viscosity of gruel samples were significantly dependent on rice (short grain) content instead of glutinous rice. The viscosity ranged from $2,891{\sim}9,153\;cP{\cdot}s$ and soluble solid content ranged from $8.23{\sim}10.13^{\circ}Brix$ at the eleven experimental points. The mixture with the highest solid content and viscosity, 12% rice gruel sample was $10.10{\sim}10.13^{\circ}Brix$ and $9,150{\sim}9,153\;cP{\cdot}s$. The L color of sample decreased with decreasing rice content, while "a" (redness) and "b" (yellowness) values slightly increased. In the sensory evaluation, samples with higher amount of puffed rice and glutinous rice scored higher for brown color, flavor and sweetness than high-content rice samples. The response surface and trace plot results showed that increasing of puffed rice increased the brown color, sweet taste and sticky aftertaste. From the results of the F-test, viscosity, "a" (redness) and "b" (yellowness) values fit a quadratic model with significant probabilities within 0.05%. The optimum predicted formulations of rice gruel containing puffed rice were 1.69% of puffed rice, 0.47% of glutinous rice and 9.84% of rice, respectively.

• Culinary science and hospitality research
• /
• v.23 no.7
• /
• pp.20-30
• /
• 2017

This study was conducted for the optimization of ingredients in salad dressing using Hwangdo peach (Prunus persica L. Batsch). The experiment was designed according to the D-optimal design of mixture design, which included 14 experimental points with 4 replicates for three independent variables (olive oil 40~65%, peach puree 27~50%, vinegar 8~20%). The linear regression models for pH, viscosity and color value and the quadratic regression models for emulsion stability, all sensory evaluation of the products were proven to be valid by the F-test for the overall significance of the regression model at a 5% level. Viscosity and pH of the products increased as olive oil content. Color value, viscosity and pH of the products increased as peach puree content. pH, viscosity, redness, and yellowness of the products decreased as vinegar content. Sensory evaluation result of the products showed that general preference for the products were increasingly affected by the increases in contents then decreased as they exceeded the optimum levels. In consequence, according to result from the first stage of the experiment, the optimum ingredients ratios of the raw materials were set in olive oil 52.43%, peach puree 35.07%, and vinegar 13.91% for ingredients of apricot dressing. These results provided the possibility that peach can be applied to the preparation of a dressing, and thereby present baseline data for the development of new dressings. This is also presumed to meet demands of customers who are always in pursuit of new products.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.737-744
• /
• 2016

For electrolysis process using an insoluble electrode, electrochemical performance was greatly affected by the manufacturing method and procedure, such as the firing temperature, pre-treatment, type of precursor solution, coating method, electrode material, etc. Components of the electrode therein is one of the most important factors in electrochemical reaction. To achieve such characteristics, a appropriate ratio of the electrode material should be carefully chosen. The aim of this research was to apply experimental design method in the optimization of electrode component for the maximum generation of oxidants in electrochemical oxidation process. Mixture design, especially expanded simplex lattice design, in DOME (design of mixture experiments) with Design Expert - commercial software - was used to analyze the data. Analysis of variance (ANOVA) showed a high coefficient of determination ($R^2$) value of 0.9470, thus ensuring a satisfactory adjustment of the $3^{rd}$ order special cubic regression model with the experimental data. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the TRO generation concentration and independent variables(mol ratio of 3 electrode components) in a real unit: TRO generation concentration $(mg/L)=TRO\;conc.=98.25{\times}[Ir]+49.71{\times}[Sn]+95.29{\times}[Sb]-16.91{\times}[Ir]{\times}[Sn]-29.47{\times}[Ir]{\times}[Sb]-22.65{\times}[Sn]{\times}[Sb]+703.19{\times}[Ir]{\times}[Sn]{\times}[Sb]$. The optimized formulation of the 3 component electrode for an high TRO (total residual oxidants) generation was acquired at mol ratio of Ir 0.406, Sn 0.210, Sb 0.384 (desirability d value, 1).