• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.460-463
• /
• 2003

의료영상에서의 혈관의 분할은 심혈관계질환의 진단 및 시술을 위한 3차원 가시화 및 가상내시경을 하기위한 필수 선행 단계로 이에 대한 연구가 많이 이루어 지고 있다. 조영제를 투여한 환자의 CT데이터에서 혈관분할의 가장 큰 문제점은 혈관의 밝기값이 뼈의 밝기값과 비슷하기 때문에 기존의 3차원 SRG방법으로 분할하는 경우 새나감의 문제를 가지고 있었다. 본 논문에서는 Cubic SRG라는 방법을 통해 기존의 3차원 SRG가 가지는 깔끔한 분할결과와 적응적인 특성등의 여러 장점을 그대로 취하며 Cubic이라는 구조적 특징을 이용하여 혈관을 빠르고 강인하게 분할하는 방법을 제안한다. Cubic SRG는 SRG가 픽셀단위의 성장을 통해 동질 영역을 분할하는 방법을 사용함에 반해 Cubic이라는 부피 단위를 지정하여 이를 SRG의 픽셀과 같이 퍼트리는 방식으로 기존의 3차원 SRG에 비해 2$\sim$5배 정도의 빠른 수행속도를 보이며 3차원 SRG의 장점인 적응적인 특성을 그대로 가질수 있도륵 구현되었다. 또한 복셀들을 Cubic이라는 단위로 묶음으로서 혈관의 구조적인 분석을 수행하여 혈관을 트리형태의 구조로 그룹화가 가능하기 때문에 혈관을 가지별로 분할하기에 용이한 특징을 가지도록 하였으며, 이를 통해 새나감이 시작된 가지를 찾아서 잘라내는 방법을 통하여 SRG의 가장 큰 문제인 새나감 방법을 효과적으로 해결하는 방법을 제시한다. 최종적으로 위의 방법을 기본으로 하여 적응형 임계값 기반의 분할 방법을 혼합하여 사용자가 지정한 두 지점사이의 혈관을 강인하게 분할할수 있도록 구현하였고, 제안한 방법으로 여러 환자의 CT데이터에 실험하여 좋은 결과를 얻을 수 있었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.17-20
• /
• 2004

가정 내에 방송과 총신을 통합하여 제공하기 위한 방법으로서 수동광가입자망(Passive Optical Network)이 제안되고 있다 이를 구현하기 위해 여러 방식들이 연구되고 있는데 크게는 방송과 통신에 각기 다른 파장을 이용하는 방식과, 이들을 시간 다중화 하여 한 개의 과장으로 송신하는 방식으로 나눌 수 있다. 또한 동신에 이용하는 과장의 경우 각 가입자에게 다른 파장을 적용하는 WPON 방식과 모든 가입자에게 한 개의 파장만을 이용하되 시간영역에서 다중화하고 이터넷 프로토콜을 적용하는 EPON 방식으로 구분할 수 있다. WPON의 경우 EPON에 비해 수월하게 광대역 서비스를 할 수 있는 장점이 있으나, 각 가입자 과장의 제어 및 관리가 복잡하며, 고비용을 요구한다. 반면 EPON의 경우 채널의 효율성은 극대화할 수 있으나, 동시 이용자가 많을 경우 전송 속도가 하락한다. 한편, 방송과 통신을 통합한 채널의 특성을 살펴보면 가입자 방향으로의 하향 신호의 양이 중양국 방향으로의 상향 신호의 양에 비해 훨씬 많은 비대칭 구조이다. 따라서 본 연구에서는 이러한 채널 특성에 맞도록 하향 전송에는 WPON의 구조를 이용하고, 상향 전송에는 EPON의 구조를 적용하는 새로운 구조의 광가입자망을 제안하였다. 제안된 구조에 적합한 MPCP (Multi-Point Control Protocol) 프로토콜을 제시하고, 가입자 장치의 여러 종속 신호를 다중화하고 전송할 수 있는 ONU (Optical Network Unit)의 구조를 제안하였다. 또한 이러한 구조를 갖는 W-EPON 테스트베드를 구현하고 전송 시험을 통해 제시된 구조의 적합성을 측정한 결과를 보인다.4 Textual format) 파일을 생성한다. 또한, 콘텐츠 전송 및 저장의 효율성을 위해 이진 포멧인 IPMP화된 MP4 파일을 생성할 수 있다.으로써, 에러 이미지가 가지고 있는 엔트로피에 좀 근접하게 코딩을 할 수 있게 되었다. 이 방법은 실제로 Arithmetic Coder를 이용하는 다른 압축 방법에 그리고 적용할 수 있다. 실험 결과 압축효율은 JPEG-LS보다 약 $5\%$의 압축 성능 개선이 있었으며, CALIC과는 대등한 압축률을 보이며, 부호화/복호화 속도는 CALIC보다 우수한 것으로 나타났다.우 $23.87\%$($18.00\~30.91\%$), 갑폭 $23.99\%$($17.82\~30.48\%$), 체중 $91.51\%$($58.86\~129.14\%$)이였으며 성장율은 사육 온도구간별 차는 없었다.20 km 까지의 지점들(지점 2에서 지점 6)에서 매우 높은 값을 보이며 이는 조석작용으로 해수와 담수가 강제혼합되면서 표층퇴적물이 재부유하기 때문이라고 판단된다. 영양염류는 월별로 다소의 차이는 있으나, 대체적으로 지점 1과 2에서 가장 낮고, 상류로 갈수록 점차 증가하며 지점 7 상류역이 하류역에 비해 높은 농도이다. 월별로는 7월에 규산염, 용존무기태질소 및 암모니아의 농도가 가장 높은 반면에 용존산소포화도는 가장 낮다. 그러나 지점 14 상류역에서는 5월에 측정한 용존무기태질소, 암모니아, 인산염 및 COD 값이 7월보다 다소 높거나 비슷하다. 한편 영양염류와 COD값은 대체적으로 8월에 가장 낮으나

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.2
• /
• pp.71-79
• /
• 2015

This paper describes vegetation based soil-media hydroseeding measures that have been previously applied as slope revegetation methods show problems such as insufficient binding force, drying, and insufficient organic matter. In particular, in the case of slope faces in regions where scattering is severe, a vicious circle exists in which remarkably low vegetation cover rates and increases in withering rates over time lead to further decreases in vegetation cover rates, which lead to further increases in erosion and scattering. Therefore, in the present study, environment friendly soil stabilizers were applied for resistance against erosion or scattering and engineering evaluations such as long-term immersion tests and flow resistance tests were conducted to determine appropriate mixing ratios. According to the results of long-term immersion tests utilizing environment friendly soil stabilizers and existing greening soil based materials, 100% collapse occurred at 30 hours and 40 days in the case of soil stabilizer mixing ratios of 0% and 2%, respectively. While the original form of the samples remained intact until the experiment was completed in the case of mixing ratios exceeding 4% indicating that 2% or higher soil stabilizer mixing ratios could affect the maintenance of forms even under extreme conditions. In addition, artificial rainfall tests were conducted on 40, 45, and 55 degree slope faces to evaluate the structural stability of vegetation based materials. Flow resistance tests were conducted on soil stabilizer mixing ratios of 0, 4, 8% to evaluate erosion resistance capability. Based on the results of the tests, environment friendly soil stabilizers applied for prevention of scattering or resistance against erosion by rainwater are considered to provide large effects to reduce losses and loss rates showed a tendency of decreasing rapidly when soil stabilizers were mixed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.1
• /
• pp.29-36
• /
• 2009

In this paper, the design and implementation of LNA and down-mixer using 90 nm CMOS process are presented for 60 GHz band WPAN receiver. In order to extract characteristics of the transistor used to design each elements under the optimum bias conditions, the S-parameter of the manufactured cascode topology was measured and the effect of the RF pad was removed. Measured results of 3-stages cascode type LNA the gain of 25 dB and noise figure of 7 dB. Balanced type down-mixer with a balun at LO input port shows the conversion gain of 12.5 dB within IF frequency($8.5{\sim}11.5\;GHz$) and input PldB of -7 dBm. The size and power consumption of LNA and down-mixer are $0.8{\times}0.6\;mm^2$, 43 mW and $0.85{\times}0.85\;mm^2$, 1.2 mW, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.4
• /
• pp.76-86
• /
• 2013

As the basic Kalman filter is limited to be used for indoor navigation, and particle filters incur serious computational overhead, especially in mobile devices, we propose an adaptive hybrid filter for WiFi-based indoor positioning systems. The hybrid filter utilizes the same prediction framework of the basic Kalman filter, and it adopts the notion of particle filters only using a small number of particles. Restricting the predicts of a moving object to a small number of particles on a way network and substituting a dynamic weighting scheme for Kalman gain are the key features of the filter. The adaptive hybrid filter showed significantly better accuracy than the basic Kalman filter did, and it showed greatly improved performance in processing time and slightly better accuracy compared with a particle filter.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.11-16
• /
• 2009

Composite electrodes for redox supercapacitor were prepared potentiodynamically by the deposition of $RuO_2$ and the co-deposition of Ru-Co mixed oxide on the surface of single-walled carbon nanotube. Electrode of Ru-Co mixed oxide, in which Ru(13.13 wt%) and Co(2.89 wt%) were deposited on the carbon nanotube, exhibited a similar specific capacitance(${\sim}620\;F\;g^{-1}$) with $RuO_2$ electrode at a low potential scan rate($10\;mV\;s^{-1}$), but showed a superior one ($570\;F\;g^{-1}$) at a high scan rate($500\;mV\;s^{-1}$) than that of $RuO_2$($475\;F\;g^{-1}$). Such increase in the specific capacitance at high scan rate by the co-deposition of Ru and Co species was due to the structural support of Co species to provide the electronic conduction through Ru species.

• Composites Research
• /
• v.25 no.4
• /
• pp.110-116
• /
• 2012

Recently, the development and field applications of Ternary Blended Cement(TBC), where blast furnace slag and fly ash are recycled in Ordinary Portland Cement(OPC) in order to obtain improvements in the durability and heat of hydration reduction performance in large scale civil structures, have been increasing. Also, there are continuing efforts by construction companies to reduce the construction time with the aim of reducing construction costs. Therefore, there is a need to improve the performance of TBC, which has a relatively slow early strength development. In order to improve the early strength of TBC mortar, the compressive strength, SO3 content, and SEM analysis was determined in this study on mortar with the fineness and content of blast furnace slag and anhydrite regulated. As a result, to secure the early strength of TBC mortar, using blast furnace slag with a fineness of approximately $4,200cm^2/g$, adding 3.5% anhydrite with a fineness of approximately $10,000cm^2/g$, and managing the $SO_3$ content to roughly 3.72% was found to provide the most outstanding early strength properties.

• Nuclear Engineering and Technology
• /
• v.28 no.1
• /
• pp.56-71
• /
• 1996

The local hydrulic characteristics in subchannels of 5$\times$5 nuclear fuel bundles with spacer grids were measured at upstream and downstream of the spacer grid for the investigation of the spacer grid effects on turbulent flow structure by using an LDV(Laser Doppler Velocimeter). The measured parameters are axial velocity and turbulent intensity, skewness factor, and flatness factor. Pressure drops were also measured to evaluate the loss coefficient for the spacer grid and the friction factor for rod bundles. From these data, it was found that the turbulent mixing and forced mixing occur up to $x/D^h=10$ and 20 from the spacer grid, respectively. The turbulence decay behind spacer grid behaves in the similar decay rate as turbulent flow through mesh grids or screens. Mixing factors useful in subchannel analysis code were correlated from the data and show the highest value near spacer grid and then have a stable values.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3652-3661
• /
• 1999

To support multimedia applications such as a multimedia communication systems and multimedia broadcasting, an operating system need to predict their timing-constraints. So, In this real-time systems, we must solve the priority inversion problem that may make the behavior of unpredictable systems and need a real-time server model that provides a better preemptability and minimizes a system overhead. In current real-time systems, the single thread server model, the worker model and the dynamic server model are being used for synchronization but they cannot propose an effective structure for managing shared resources. In this paper, the priority inheritance protocol is used to solve the priority inversion problem and the hybrid prioritized worker model is proposed, which can provide a more effective structure and a faster response time minimizing a system overhead. The hybrid prioritized worker model is to combine the static and the dynamic prioritized worker model, and have a better performance than other models in response time which is an important factor in a real-time system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.562-570
• /
• 2018

New physical properties of polymer materials were obtained by blending two or three different type of polymers. TPE is used widely in the display, automotive and electronics industries. Consumers have sought emotionally more sensitive and advanced interior automotive parts. A polymer with high foamibility (Ed note: Please check this.) and flowability would be more plausible. TPE composed of foam is a good polymer material to satisfy these trends. In this research, two different TPE were tested, focusing on foamibility and flowability. Two type of TPE were prepared. The first was blended Homo-PP, oil and SEBS. The second was Co-PP, oil and SEBS. The blending temperatures were $180^{\circ}C$, $190^{\circ}C$, and $260^{\circ}C$(second one). The blending speed was 50rpm and blending time was 5 min. The MI of the blended material was affected by the MI of PP and not affected by the blending temperature. The hardness and tensile elasticity were less affected by the MI of PP and blending temperature. The hardness and tensile elasticity were lower at a higher SEBS/Oil content ratio. The soft touch feel was higher with high SEBS/Oil contents. The IPN (Interpenentration polymer network) structure was observed by dissolving the SEBS/Oil layer in xylene. Strain-hardening phenomena also was observed. TPE behaves in a rubber and foamed closed-cell improved its stability.