• 한국가시화정보학회:학술대회논문집
• /
• 2005.04a
• /
• pp.3-57
• /
• 2005

왕복동 내연기관에서의 연소 및 배기가스 생성은 복잡한 3차원 영역 내에서 난류 유동, 분무, 화학반응, 열전달, 경계층 현상이 상호 연계되어 있는 매우 복합적인 과정이다. 특히 난류 연소 현상은 기관의 효율을 결정하는 연소 속도와 pollutant의 배출 농도를 결정하는 핵심 요소로서 관련 모델과 수치 해법에 대해 학술적, 공학적 측면에서 세계적으로 활발한 연구가 이루어지고 있다. 이를 위해 수행되는 다양한 실험 측정과 수치 해법을 통해 얻어지는 3차원 과도 상태의 방대한 스칼라량과 벡터량에 대한 정보를 효율적으로 처리하기 위해서는 적절한 가시화 과정이 필수적이다. 여기서는 최근 다양한 엔진 타입들에 대한 응용 사례와 함께 난류 연소 모델링을 위한 새로운 접근법으로서 조건평균법(conditional averaging)에 대해 간략히 소개하고자 한다. 난류예혼합연소에서의 난류화염속도에 대한 DNS와 영역조건평균에 기초한 예측식의 검증, 천연가스 jet의 자발화 지연기간, n-heptane jet의 자발화 진행 과정, HSDI 엔진, HCCI 엔진, CNG 엔진, LPG 분무 및 엔진, GDI 엔진 등에 대한 연구 결과들은 정보 가시화의 한 사례가 될 수 있을 것으로 생각된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.1
• /
• pp.1-14
• /
• 1999

선형탄성이론을 기초로 한 구조해석의 경우 사용하중상태에서의 변형과 응력은 만족할 만한 결과를 나타내지만, 항복후의 처짐과 파괴시의 극한하중 산정의 정확한 해석이 불가능하다. 평판의 극한해석시, 상한계 이론을 바탕으로 한 항복선 이론이 널리 사용되고 있으나 이론적으로 평판의 강도를 과대평가하게 된다. 그러므로, 임의의 하중조건과 경계조건에 대한 비선형 거동과 극한내하력을 산정할 수 있는 해석기법이 필요하다. 평판의 정확한 극한하중을 위해 p-Version 유한요소법을 제안하며, p-Version의 해석치를 범용 구조해석 프로그램인 ADINA의 결과와 문헌의 이론치와 비교하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.313-313
• /
• 2023

이 연구에서는 침수식생 조건에서 식생 형태 별 frontal area, solid volume fraction이 유속 분포에 미치는 영향을 분석하고, 흐름측정결과로부터 식생 형태에 따른 난류흐름특성을 분석하기 위하여 수행 되었다. 식생흐름 구현을 위하여 5 cm의 간격으로 총 257개의 모형식생을 전체 영역에 배치했다. 유속측정위치는 수위측정결과에 따라 흐름이 안정화되는 구간에서 연직방향으로 17개 지점에서 측정한 후 앙상블 평균하여 분석했다. Branch의 유무에 따라 Type I과 II로 구분하여 각 식생에 대해 유속의 연직분포를 측정한 결과, Branch가 없는 Type I에서는 유속이 지속적으로 감소하는 반면, Type 2에서는 Frontal area가 급격히 증가하는 Branch 구간에서 유속이 급격히 감소한 후 Trunk 구간에서 유속이 다시 증가하는 변화를 보였다. Velocity Spectrum 분석 결과, 모든 지점에 대해 평균한 결과 고주파수 영역에서 -5/3 law를 따르는 것으로 나타나 전체 영역에서 isotropic & homogeneous 난류흐름이 발생함을 확인했다. 난류흐름특성 계산결과, Turbulent kinetic energy(k)를 mean kinetic energy(K)로 무차원화하여 연직분포를 비교했을 때 -k/K는 모두 식생에 근접하며 증가했다. Shear production(P_s)의 계산결과로부터 전단흐름에 의한 난류운동에너지 생성영향분석결과, Type I과 II가 식생경계의 mixing interface 부근에서 급격히 증가하는 분포를 보였으며, 이는 시간평균유속분포에서 분석한 결과와 일치한다. Wake production(P_w)의 연직분포계산결과, P_s와 유사하게 식생경계 부근에서 상승하는 결과가 나타났으며, 이는 식생경계에서 발생하는 Large scale eddy로 인해 발생함을 알 수 있다. 마지막으로 x-방향 난류확산계수로부터 scale factor(α_x)의 연직분포를 계산한 결과, 식생경계부근의 mixing interface에서 증가한 후 식생영역 내에서 감소하는 분포를 나타냈다. z-방향 난류확산 계수의 scale factor(α_z)는 α_x에 비해 작게 계산되었다. 이러한 결과는 오염물질의 연직확산이 식생경계에서 증가한 후 식생 내부에서 감소하여 오염물질, 부유사 등의 축적이 이뤄질 것으로 예상된다. 이는 가지로 인해 식생저항이 증가할 경우 용존성 물질의 혼합이 감소하여 식생의 저장대 효과가 증가함을 의미한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.633-640
• /
• 2011

In this study, the stabilization of an edge flame and the intensity variation of a diffusion branch were investigated using a multi-slot combustor under conditions of high temperature and small fuel-concentration gradient (FCG). The combustor consists of three narrow channels: a quartz channel and two side-heating combustors. For the accuracy of this experimental study, quantitative analysis was carried out for each boundary condition. Stable edge flames could be observed under high-temperature conditions by controlling the FCG and fuel dilution ratio. Moreover, it was found that the intensity of the diffusion flame was increased by increasing the temperature of the mixture. On the contrary, the intensity of the diffusion flame was decreased by increasing the dilution ratio. It was also found that a propane flame is more sensitively affected by these experimental parameters than a methane flame.

• Journal of the Korea Computer Graphics Society
• /
• v.20 no.4
• /
• pp.9-16
• /
• 2014

This paper proposes a novel method that couples fluid and deformation/fracture. Our method considers two interaction types: fluid-object interaction and fluid-fluid interaction. In fluid-fluid interaction, we simulate water and smoke separately and blend their velocities in the intersecting region depend on their densities. Our method separates projection process into two steps for each of water and smoke. This reduces the number of grid cells required for projection in order to optimize the number of iterations for convergence and improve stability of the simulation. In water projection step, smoke region regarded as the cells with Dirichlet boundary condition. The smoke projection step solves water region with Neumann boundary condition. To take care of fluid-object interaction, we make use of the fluid pressure to update velocities of the each of the mass points so that the object can deform or fracture. Although our method doesn't provide physically accurate results, the various examples show that our method generate appealing visuals with good performance.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.3
• /
• pp.5-13
• /
• 2000

In this study, the Disturbed State Concept (DSC) constitutive model is calibrated and modified for steel-sand interface by using the HiS S model for relative intact (Rl) state and the critical state model for the fuBy adjusted (FA) part in the material. The general formulation for implementation is developed. Then, the DSC model with modification for interface is implemented in finite element program based on the generalized Biot's theory. The interface test under one-way monotonic and two-way cyclic loading were numerically simulated using the finite element program modified in this study. The DSC predictions show improved agreement with the observed results from laboratory test. Overall, the computer procedure with the DSC allows relatively improved simulation ofthe soil-structure interaction problems.oblems.

• Solar Energy
• /
• v.15 no.2
• /
• pp.25-37
• /
• 1995

This paper presents an approximate analytical solution to one-dimensional model of the charging process for stratified thermal storage tanks, in which variation of the inlet temperature as well as the momemtum-induced mixing is taken into accout. The mixing is incorporated into the model as a constant-depth perfectly mixed layer above the plug flow region. Based on the superposition principle, the variable inlet temperature is approximated by a number of step functions. Temperature distributions for the thermocline corresponding to three types of interfacial condition arr successfully derived in terms of well-defined functions, so that a linear combination of them constitutes the final solution. Validity and utility of this work is examined through the comparison of the approximate solution with an exact solution available for the case of linearly increasing inlet temperature. With increasing the number of steps, the present solution asymptotically approaches to the exact one. Even with a limited number of steps, the present results favorably agree with those by the exact solution for a wide range of the mixing depth. Also, it is revealed that fewer steps are needed for meaningful predictions as the mixing. depth becomes larger.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.1
• /
• pp.18-24
• /
• 2003

A three node triangular element with drilling rotations incorporating improved higher-order zig-zag theory(HZZT) is developed to analyze the vibration of pretwisted composite plates with embedded damping layer. Shear force matching conditions are enforced along the interfaces between the embedded damping patch and the border patch by matching the shear forces of the embedded damping patch to the shear forces of the adjacent border patch. The natural frequencies and modal loss factors are calculated for cantilevered pretwisted composite blade with damping core with the present triangular element, and compared to experiments and MSC/NASTRAN using a layered combination of plate and solid elements.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.5
• /
• pp.24-31
• /
• 2010

Combustion-stability rating of impinging-jet injector is conducted numerically using hot-fire simulation in a subscale chamber with the five-element injector head. A sample F(fuel)-O(dxidizer)-O-F impinging-jet injector is adopted. In this work, instantaneous chemical reaction is adopted for hot-fire simulation based on the assumption that mixing process of fuel and oxidizer streams is controlling. The model chamber was designed based on the methodologies proposed in the previous work regarding geometrical dimensions and operating conditions. The present stability boundaries are in a good agreement with air-injection and hot-fire experimental data. The proposed numerical method can be applied cost-effectively to stability rating of jet injectors when mixing of fuel and oxidizer jets is the dominant process in instability triggering.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1672-1686
• /
• 2013

In this paper, we propose a hybrid super-resolution algorithm robust to cut-change. Existing single-frame based super-resolution algorithms are usually fast, but quantity of information for interpolation is limited. Although the existing multi-frame based super-resolution algorithms generally robust to this problem, the performance of algorithm strongly depends on motions of input video. Furthemore at boundary of cut, applying of the algorithm is limited. In the proposed method, we detect a define boundary of cut using cut-detection algorithm. Then we adaptively apply a single-frame based super-resolution method to detected cut. Additionally, we propose algorithms of normalizing motion vector and analyzing pattern of edge to solve various problems of existing super-resolution algorithms. The experimental results show that the proposed algorithm has better performance than other conventional interpolation methods.