• 한국잠사곤충학회지
• /
• 11호
• /
• pp.87-94
• /
• 1970

양잠농촌 부녀자들의 의복 꼭 변천과정을 구명하기 위하여 전국에서 임의로 선택한 양잠농촌부녀자 총 183 명을 대상으로 1961년∼1969년까지 3년간에 걸쳐 신조한 의복(양복 한복)을 조사하여 연령별 연도별로 비교 검토한 결과는 다음과 같다. 1. 양복신조율은 한복에 비하여 2배정도 높았으며 젊은 층일수록 이 비율이 높았다. 연도별로는 점차양복이 한복에 비해증가되는 경향을 보였다. 2. 의복의 유형은 양복에서는 브라우스, 원피스, 스카트가 대부분이었고 한복에서는 저고리와 치마가 거의 전부를 차지하였다. 년도별로는 점차 원피스가 많아지는 경향을 보였다. 3. 의복 제조방법은 자가 제조나 기성복은 적었고 대부분이 맞춤이었다. 이를 연령별로 보면 자가제조와 기성복은 연장자일수록 젊은 층보다 더 많았다. 4. 착용 계절별로는 양복은 하절에 한복은 동절에 많았고 복종별로는 하절에는 원피스 춘추에는 투프스가 많았으며 치마는 계절에 따른 변화가 거의 없었다, 5. 의복종류별로 보면 양복은 폴리에스텔과 이의 혼방물이 가장 많았고 견직물이 가장 적었으며 한복은 이와 반대로 견직물과 견사혼방물이 많았다. 년도에 따라서는 합성섬유가 점차 증가되는 경향을 보였다. 6. 기호색은 양복에서는 백색, 청색, 갈색, 흑색의 순이었고, 한복은 백색, 청색, 녹색, 회색의 순이었다. 연령별로는 젊은 층일수록 색의 선택이 다양하였고, 연도별로는 뚜렷한 차이를 인정할 수 없었다.

• 한국의류학회지
• /
• 제12권3호
• /
• pp.285-294
• /
• 1988

The purpose of this study is to investigate the effect of cotten, polyester and cotton/polyester blend fabrics on subjective wear sensations and physiological responses at the environmental conditions. Experimental garments were round neckline T-shirts made of $100\%$ cotton, $50/50\%$ cotton/polyester, $35/65\%$ cotton/polyester and $100\%$ polyester, respectively. Four healthy young women wern chosen as subjects for the experiment and the subjects have taken intermittent exercise for 30-min, on bicycle ergometer. Conditions of experimental chamber were as follows Environment I; Temperature $30\pm1^{\circ}C$, Humidity $70\pm3\%$ R.H and Air Velocity 0.25 m/sec Envorpnment II; Temperature $22\pm1^{\circ}C$, Humidity $54\pm3\%$ R.H. and Air Velocity 0.25 m/sec The results are as follows; 1) At Environment I, skin temperatures of chest and back covered with experimental garments were not significantly different, but, at Environment II, $100\%$ polyester garment showed the higher skin temperature. 2) In both conditions, garment made of $50/50\%$ cotton/polyester were felt the best 'tactile sensation' and 'comfort' 3) The significance of subjetive wear sonsations among clothings are larger in Environment I than in Environment II.

• 한국의류학회지
• /
• 제8권2호
• /
• pp.47-57
• /
• 1984

Effect on the hand value and mechanical properties of blend ratio and weight had been investigated Oil summer suits for men. Relation between the mechanical properties and the deformation in behavior was also studied. The mechanical properties which influence the hand values and total hand value had been discussed and the relation between mechanical properties, hand values and fabric count had, too. As result, the following conclusions had been obtained. 1) The values of tensile properties increased with the increase of blend ratio of wool. The values of surface properties increased according to the increase of blend ratio of polyester. 2HB(bending properties) of polyester/wool blend showed higher value than that of $100\%$ wool, but there was no change in the shearing properties according to the blend ratio. The values of stiffness, crispness and anti-drape stiffness of blend fabric showed higher values than those of $100\%$ wool fabric. The value of fullness (including softness) of blend fabric showed lower value than that of $100\%$ wool fabric. 2) The correlation between hand values and mechanical properties showed following order. in stiffness : bending properties>surface properties in crispness: surface properties>bending properties in anti-drape stiffness: bending properties>surface properties>shearing properties.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.30-39
• /
• 1994

To study the printing behaviors of Polyester and cotton(P/C) fabrics printed with disperse and reactive dyes, the effects of alkalis on the fixation of reactive dyes and the alkali-stability of disperse dyes in various methods of fixation were examined. The anthraquinone disperse dyes which have diamino derivatives as substituents without hydroxy group, such as C.I. Disperse Violet 1(D.V.1), C.I. Disperse Violet 28(D.V.28) and C.I.Disperse Blue 60(D.B.60) showed good results of fixation without regard to the concentration of NaHCO$_3$. In case of high temperature steaming(HTS) and unsaturated steaming(US)/HTS, D.V. 1 was alkali-stable and effective for P/C printing. A good result was obtained with D.V.1 and C.I.Reactive Orange 13(R.O.13) paste of 4% $K_{2}CO_{3}$. It was found that the unfixed D.V.28 bearing chloro group can hinder the fixation of monochlorotriaxinyl reactive dyes, and D.B.60 made little stain on 100% cotton. In thermosol(Tm), the dye uptake of D.V.1 was not decreased so much, but those of D.V.28 and D.B.60 were greatly decreased.

• 한국염색가공학회지
• /
• 제9권3호
• /
• pp.1-9
• /
• 1997

Plasma techniques permit modification of the surface layers of the substrate while maintaining its bulk properties. The use of plasma treatment on textile fibers and fabrics is very limited, however, the limitations, plasma treatments have been used to modify surface properties of textiles. In this study, multifunctional finish was performed by corona discharge technique for surface functionalization. Electron spectroscopy for chemical analysis(ESCA) was used to determine the ratios of carbon, oxygen, nitrogen, and phosphor at a 20$\AA$ sampling depth. K/S value and limiting oxygen index(LOI) value were used to obtain information on the effect of the finished fabrics. The mechanism of the flame retardancy was analyzed by the thermogravimetry-and the residue number. In ESCA, relative N1s intensity increased in case of mixtrure. The flame retardancy of the polyester and polyester/cotton fabrics treated with JA-6034 and JA-6050 was found to be operative mainly in the condensed phase mechanism. The multifunctional finish was better effect for the post treated finish agent.

• 한국염색가공학회지
• /
• 제10권5호
• /
• pp.24-31
• /
• 1998

The effects of DMDHEU alone and DMDHEU/Fluorochemical(FC) combined treatment on the physical properties of 75％/25％ cotton/polyester(CP) blended fabrics were investigated. FC water repellent and DMDHEU durable press finishes were applied in combination to CP fabrics to provide good water repellency as well as great durable press(DP) performance. The physical properties of the fabrics were evaluated by wrinkle recovery angle(WRA), DP performance, contact angle, demand wettability, and water repellency. The durable press/water repellent finished(DP/WR) CP fabrics show considerably improved WRA and DP performance. The DP/WR finishes do not change the water contact angie of polyester fibers significantly, while the DP finishes increase it. Both DP and DP/WR finishes increase the contact angle of cotton fibers. The water uptake amount increases in the following order : DP/WR cotton, DP/WR CP＜DP cotton, DP CP ＜ Control CP, Control cotton. The water uptake amount increases in the following order DP/WR CP, DP/WR cotton ＜DP cotton ＜DP CP＜Control CP, Control cotton. Considerable improvements for water repellency are imparted to the CP fabrics treated with DP/WR, and the level of improvement is not significantly different from that of the DP/WR cotton fabrics. These results lead to the conclusion that DP/YVR treatments a single pad bath on CP are effective finishes for improving both DP performance and water repellency.

• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.13-21
• /
• 1999

In this study, selected cotton fabrics and polyester/cotton(P/C) blended fabrics are treated with a soluble polyurethane(SPU) and then, printed by heat transfer to determine the effect of SPU treatment on dye uptake of the samples. The results obtained are as follows： 1) In heat transfer, dye-uptake gets higher in Vopotion to temperature and time. The optimum printing temperature and printing time of C.I. Disperse Orange 3 and C.I. Disperse Violet 1 are $200^\circ{C}$ and 50sec. 2) Dye-uptake gets higher according to SPU concentration ; both cotton and P/C fabrics show the highest at $100g/\ell$. 3) In color, as temperature, time and SPU concentration increase, P/C fabrics show more yellowish orange color than cotton fabrics in case of C.I. Disperse Orange 3 and P/C fabrics show more reddish violet color than cotton fabrics in case of C.I. Disperse Violet 1. 4) All fastness of cotton and P/C fabrics treated with SPU are good, but color fastness to washing and water of cotton fabrics treated with SPU are not good.

• 한국염색가공학회지
• /
• 제28권1호
• /
• pp.14-22
• /
• 2016

The objective of this study is to develop eco-friendly, functional towel material utilizing cotton-Modal-chitosan blended(C-M-CH) yarn and natural dyeing with mugwort colorants. Dyeing properties of towels with mugwort colorants were studied by investigating the effect of dyeing conditions including concentration of mugwort colorants, dyeing temperature, and dyeing time, and the effects of mordants on dye uptakes were investigated. The C-M-CH towel showed better dye uptake than 100% cotton towel with mugwort colorants. The shade of towels got darker and red-yellowish tint increased by mordanting. Comparing with 100% cotton towel, the colorfastness of dyed C-M-CH towel was satisfactory showing above 3 grade which is the lowest grade to washing fastness. The antibacterial activity against Staphylococcus aureus and deodorization performance of towels were excellent and improved by dyeing with mugwort colorants. From the results obtained, it is concluded that the cotton-Modal-chitosan blended towel dyed with mugwort colorants can be used practically for an eco-friendly and multi-functional towel materials with excellent absorbance and drying properties.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.61-61
• /
• 2012

현재 기능성 의류 섬유시장에서도, 요구하는 주요 기능들의 퍼포먼스 수준을 보여주는 과학적 수치들과 함께 기능성 섬유제작 과정에서 얼마나 친환경적인 제조과정을 거쳤는가에 대한 정보들도 요구하고 있는 중이다. 섬유에 인간과 환경에 유해한 성분이 최대한 배제됐으며 생산 과정에서의 자연자원의 낭비가 이뤄지지 않았음을 증명해야한다. CPB 전처리 공정은 혼방직물과 같이 서로 다른 물성을 가지는 직물에 대한 저온 처리로 섬유 손상을 최소화하고, $CO_2$ 발생량 및 에너지 소비량을 감소시킬 수 있는 이점이 있다. CPB 전처리는 호발, 정련, 표백을 포함하는 공정으로 일욕으로 처리 시 패딩, 수세, 와인딩 공정을 단축시키기 때문에 약품 소비량 감소와 에너지 사용 절감 효과가 있어 전 세계적으로 확산되고 있는 Green Technology이다. 본 연구에서는 CPB용 전처리 조제(4~5종)을 일욕화 하여 가공업체 생산성 향상 및 원가절감, 환경유해성 감소를 목표로 하여 CPB 전처리의 최적 가공조건을 확립하는 것이 목표이다. 첨가 용제의 종류 및 첨가량을 변화시켜 각 조성비에 따른 sample을 제조하여 정련성, 호발성, 알칼리 안정성, Whiteness를 측정하여 전처리 성능을 분석하고, 과수안정성, 금속이온 봉쇄력을 비교하여 최적 조성비 및 중합조건을 확립하였다.

• 한국응용과학기술학회지
• /
• 제13권2호
• /
• pp.39-46
• /
• 1996

Durable softening water-repellenting agent such as PODCW, PDDCW and PEDCW were prepared by blending cationized compound such as poly(octadecyl methacrylate-co-2-diethylaminoethyl methacrylate)[PODC], poly(2-dodecyl methacrylate-co-2-diethyl-aminoethyl methacrylate)[PDDC] and poly(2-ethylhexyl methacrylate-co-2-diethyl-aminoethyl methacrylate)[PEDC], and cationized compound of fatty carbamide, of which synthetic methods were reported in the previous paper, waxes, and emulsifiers. The results of physical tests of the P/C blended fabrics treated with PODCW, PDDCW and PEDCW with and without textile finishing resin, showed a remarkable improvement of the physical properties. The prepared water-repellenting agents, PODCW-6 and PDDCW-1, were treated on P/C blended fabrics with and without resin. For any cases, there are a little changes between initial water repellency and repellency after 3 times washing of the fabrics. Therefore, the water-repellenting agents proved to be a durable agents, and initial water $100^{+}$ and $90^{+}$ point, respectively.