• Title/Summary/Keyword: 형태 복원

Search Result 827, Processing Time 0.029 seconds

Ultrasonographic Analysis of the Size and Shape of the Muscles (근육의 크기와 형태의 초음파적 분석)

  • Kim, Kwang-Baek
    • Journal of the Institute of Electronics Engineers of Korea CI
    • /
    • v.48 no.2
    • /
    • pp.9-15
    • /
    • 2011
  • In this paper, we propose a method to extract the external oblique muscle of abdomen images that is often excluded by previous method due to image distortion. In the preprocessing phase of the proposed method, we emphasize the brightness contrast with Ends-in search stretching algorithm after removing noise from the initial ultrasonic images. Then we apply average binarization in vertical direction to extract candidate fascia areas. After removing other areas than fascia with morphological characteristics, the lost part in the fascia during the process is restored with such characteristic information and location information. Then the skin area is also removed with information from the arc appearing in convex filming and the candidate muscle areas are extracted by overlapping two results two way up-down search algorithm. Another noise removing process is done to determine the muscle area. In case of obtaining obscure result, after restoring the muscle area by smearing method, the thickness of the muscle is measured by min square method. The experiment verifies that the proposed method is sufficiently effective to analyze the size and shape of muscles in abdomen in ultrasonography than previously used methods.

A study on the development of instream habitat creation technique (하도 내 생물서식처 조성기술개발에 관한 연구)

  • Kim, Si-Nae;Lee, Dong-Jun;Ahn, Hong-Kyu
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.117-121
    • /
    • 2011
  • 기존 국내의 자연형 하천복원사업은 인위적으로 정비된 하천을 대상으로 훼손된 자연성을 되살리기 위하여 물리적 환경의 개선을 중심으로 진행되었으며, 저수호안의 안정성과 더불어 식생 피복율을 높이는 등 형태적 복원을 중심으로 사업이 시행되어 왔다. 이러한 자연형 하천복원사업은 하천의 생태적 특성에 대한 고려가 미비하여 하천이 생물서식처로서의 기능을 수행하는 데에는 효과적이지 못하였다. 따라서 본 연구는 하천의 물리적 특성에 의하여 형성되는 생물서식처와 이에 반응하는 생물들의 상호관련성을 분석하여 생물들에게 적합한 서식환경을 제공할 수 있는 기술을 개발하며, 하천유역의 환경 훼손으로 인하여 개체수가 급감하고 있는 종을 복원 목표종으로 선정하여 개발된 기술을 현장에 시범적으로 적용하여 기술을 검증함으로써 생물을 중심으로 한 자연과 함께하는 하천복원기술을 개발하고자 하였다. 이를 위해 우리나라의 중소하천을 대표할 수 있는 대표하천을 선정하여, 서식처 유형을 분류하고 각 서식처의 물리 화학 생태특성을 분석하였으며, 이를 통해 납자루아과 어종의 산란처 및 서식처로서의 역할을 하는 개방형 하도습지 조성 기술을 개발 및 시범적용 하였다.

  • PDF

Determination of AHP-based factor weights for quantification of regional mega-drought resilience (지역별 메가가뭄 복원력 정량화를 위한 AHP기반 인자 가중치 결정)

  • Lee, Chanwook;Moon, Gihoon;Yoo, Do Guen
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.361-361
    • /
    • 2021
  • 가뭄의 경우 타 자연재난에 비해 발생경로, 피해범위, 발생기간 등이 매우 다양해 다각적인 측면에서의 대응책 마련이 필요하다. 따라서, 극한가뭄에 대비한 지자체별 가뭄 역량 평가를 수행하는 것은 재난관리에 있어서 최우선이라고 할 수 있다. 현재 국내외적으로 가뭄과 관련된 지역적 복원력을 평가한 사례는 매우 적다. 가뭄은 지진, 홍수 등과 같은 타 자연재난에 비하여 지속기간이 길고, 그 지속기간에 따라 피해의 영향 또한 파급력이 달라지므로 복원력 산정을 위한 항목, 복원력 곡선의 저하 형태 및 양상 역시 가뭄의 특성에 맞춰 도출되어야 한다. 본 연구에서는 지자체별 극한가뭄에 대한 복원력 정량화를 위하여 가뭄과 관련된 내구성, 대체성, 신속성, 자원동원력의 세부인자를 정성인자와 정량인자로 구분하여 총 18개 항목으로 구성하였다. 구성된 18가지 항목이 정량인자 뿐만 아니라 정성인자로 구성됨에 따라, 모든 인자를 동일한 가중치로 평가할 경우 최종결과가 상대적 중요도의 미 고려로 인해 왜곡될 가능성이 존재한다. 따라서 계층적분석기법(AHP, Analytic Hierarchy Process)을 통해 내구성, 대체성, 신속성, 그리고 자원동원력에 대한 가중치와 내구성, 대체성, 그리고 신속성에 대한 세부 지표별 가중치를 도출하여 지역별 메가가뭄 복원력을 정량화 하였다. 분석결과를 동일한 가중치를 적용한 결과와 비교분석하였으며, 과거 가뭄사례를 통해 검토하였다.

  • PDF

A Study on the Applicability of 3D Ceramic Printing Technology for Restoration of the Missing Part of Damaged Ceramics (훼손 도자기 결실부 복원을 위한 3D 세라믹 프린팅 기술의 기초 적용성 연구)

  • Oh, Seung-Jun;Wi, Koang-Chul
    • Journal of the Korea Convergence Society
    • /
    • v.11 no.11
    • /
    • pp.165-173
    • /
    • 2020
  • ABS and PLA are applied for restoring missing part of damaged ceramics, but are not similar to the material of ceramics, so this study conducted a research on the properties and applicability of ceramic resin. This study conducted actual restoration of ABS and ceramic resin as well as cast restoration method with experiment of properties. Results show that manufacturing of restored part showed higher precision than existing materials, which enables printing of tiny shapes showing excellent surface texture and gloss than L30 and ABS resin. As a result of measuring properties, the material showed excellent durability than existing materials with no contraction and deformation and compressive strength, but value of specific gravity and hardness can lower processability after manufacturing. Long-term monitoring, evaluation of reliability of ceramic resin applied in this study, additional researches on the restorability of the original shape when printing too thin or long restored part are needed.

Regularization-based Superresolution Demosaicing using Aperture Mask Wheels (조리개 마스크 휠을 이용한 정칙화 기반 초해상도 디모자이킹)

  • Shin, Jeongho
    • Journal of Broadcast Engineering
    • /
    • v.23 no.1
    • /
    • pp.146-153
    • /
    • 2018
  • This paper presents a superresolution demosaicing technique that can restore high-resolution color image from differently blurred low resolution images in Bayer domain. The proposed superresolution demosaicing algorithm uses an aperture mask wheel to get differently blurred low resolution images, so we just need to estimate point spread function at each frame. In addition, it does not require image registration because there is no translational motion between low resolution images. By using a rotatable aperture mask wheel, consecutive captured images provide sufficiently exclusive information for superresolution. Therefore, the proposed method can reduce the registration error between the low-resolution image as well as the calculation amount for superresolution restoration. The existing lens system of the camera can be extended to obtain a superresolution image by only adding an rotatable aperture mask wheels. Finally, in order to verify the performance of the proposed system, experimental results are performed. The proposed method showed the significant improvements in the sense of spatial and color resolution.

Structures of the Cover of Geobukseon for Imjin War (임진왜란 거북선 개판(蓋板)의 구조)

  • Hong, Soon-Koo
    • The Journal of the Korea Contents Association
    • /
    • v.11 no.3
    • /
    • pp.201-210
    • /
    • 2011
  • Discussion on restoration of Yi Sun-sin's Geobukseon used in sea battles of Imjin War continues. This is because no historical records which we can understand external and internal structure of Geobukseon used in Imjin War do not remain until now. The Geobukseon currently restored based on pictures of woodprint of Jella-jwasuyeong and Tongjaeyeong Geobukseon in Yi-chungmugong Jeonseo published by king's command in the 19th year (1795) of King Jeongjo, but two Geobukseons were built 203 years after Imjin war and not the same as that of Imjin War. Geobukseon that was built by Yi Sun-sin in Imjin War and restored now has many problems in terms of its structure and shape since they do not accord with the records of the literature at that time. Yi Deok-hong's Picture of Hexangonal Ship, drawing Geobukseon in 1593 for the first time was not in it in the study of Geobukseon, but it agrees with Imjin War in terms of the time and in analysis of the structure through picture interpretation and the relationship between Panokseon, Jella-jwasuyeong, and Tongjaeyeong Geobukseon, the center of the upper part of the roof cover is flat, and iron spikes are stuck in the front, back, left and right. The structure and shapes of Geobukseon in the records at the time of Imjin War.

Modified Directional Algebraic Reconstruction Technique Using Adjacent Current Pattern (인접전류패턴을 사용한 변형된 방향 대수적 영상복원법)

  • Kim, Ji Hoon;Kim, Chan Yong;Kim, Kyung Youn;Choi, Bong Yeol
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.49 no.12
    • /
    • pp.256-264
    • /
    • 2012
  • The directional algebraic reconstruction technique (DART) using the trigonometric current pattern is one of the image reconstruction algorithms in electrical impedance tomography (EIT). This method needs to compute resistances between electrode pairs as using relation between the injected currents and measured voltages for the reconstruction of the inner image. The delay time is incurred in this process. Therefore this paper proposes modified directional algebraic reconstruction technique (mDART) using the adjacent current pattern instead of the trigonometric current pattern to solve the delay time for initial resistance values. The proposed method uses measured voltages instead of computed resistances in the reconstruction algorithm. Hence this method can eliminate the delay time because it does not use the resistances. In conclusion, the proposed method improves image quality and image reconstruction time by using the adjacent current pattern. To prove performance of the proposed method, we carried on computer simulation of various cases.