• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.06a
• /
• pp.112-115
• /
• 2018

본 논문에서는 공간적 일관성과 시간적 일관성을 모두 고려하는 그래프 컷(graph cuts, GC) 알고리즘을 적용한 새로운 비디오 정합(video stitching) 방법을 제안한다. 먼저 입력 비디오로부터 취득한 전체 프레임에 대해서 정렬(frame alignment) 작업이 완료된 후, 프레임 합성(frame composition)을 위한 정합선 찾기(seam finding) 과정을 진행한다. 정합선을 찾는 과정에서 개선된 그래프 컷 알고리즘을 이용해 정렬된 프레임들을 자연스럽게 합성할 수 있는 최적의 정합선을 찾는다. 우선, 첫번째 입력 프레임에서 찾은 최적 정합선을 참조 정합선으로 설정한다. 그 다음, 연속된 프레임들의 정합선 찾기 과정을 수행할 때, 참조 정합선과의 거리 값을 가중치로 이용하는 새로운 비용 함수를 적용한다. 본 논문에서 제안하는 알고리즘으로 찾은 최적 정합선은 입력 프레임의 중첩 영역에 움직이는 물체가 존재할 때, 물체의 모양을 손상시키지 않으면서 동시에 연속된 프레임의 정합선을 유사한 형태로 유지시킨다. 결과적으로 공간적, 시간적 자연스러움이 보장되는 고품질의 비디오 정합 결과를 얻을 수 있다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.6
• /
• pp.837-842
• /
• 2010

The physicochemical properties of coarse semolina (CS), medium semolina (MS) and fine semolina (FS) were investigated to research method applied in noodles processing of Korean wheat semolina. Large particle (>250 ${\mu}m$) was over 75% in all semolinas, except for FS, and the particle distribution of MS and durum semolina (DS) was similar. Crude protein and crude ash were the highest in DS followed by CS>MS>FS. Crude lipid of DS was the lowest among samples and CS, MS and FS were not significantly different. L value was high in semolina with small particle distribution and starch damage was the lowest in DS followed by FS>MS. Amylose content was high in DS (29.80%) and FS (29.08%) with small particle distribution. Water binding capacity was the highest in DS, and FS showed the highest water binding capacity among Korean wheat samples. Solubility and swelling power were noticeably high in FS with low starch damage and small particle distribution. In scanning electron microscope (SEM), FS and MS showed distribution of separated fine particles of flours. From these results, the physicochemical properties of semolina showed many differences by grinding methods. FS should be applied in noodles processing through additional examination about characteristic of noodle making.

• Journal of the Korean Arthroscopy Society
• /
• v.3 no.1
• /
• pp.24-29
• /
• 1999

Purpose : The purpose of this paper is to analyze the clinical results after meniscal repair using meniscal arrow. Materials and Methods : Between May 1997 and Aug 1998, we repaired 22 tom menisci in 22 patients using meniscal arrows. There were nineteen males and three females with an average age of 27 years. There were longitudinal tear in 14 cases, Bucket-handle tear were 7 cases and horizontal tear was in 1 case. In 22 meniscus tears, 16 cases were associated with anterior cruciate ligament tear. Average number of meniscal arrow that was used were 2.5(ranged 1 to 4). Average follow-up period was 14.7 months(ranged 6 to 22 months). We evaluated the clinical results by the Tapper and Hoover's grading system. Results : There were excellent in 16 cases, good in 4 cases and fair in 2 cases on the clinical results. At the last follow up, the range of the motion of the knee joint were average 135 degrees(ranged 125 to 140 degrees). Mean time elapsed for meniscal repair were 25 minutes(ranged 15 to 40 minutes). Conclusion : Meniscal arrow has many advantages such as short operative time, easy fixation technique, and less neurovascular injury. We think that arthroscopic meniscal repair using meniscal arrow is effective treatment method in selected patient who have longitudinal, bucket-handle tear at the posterior hom associated with anterior cruciate ligament tear.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.621-630
• /
• 2019

A woodblock softening process using saltwater was investigated in order to reduce the cracks and distortion caused by the woodblock-making process and to make the woodblock softer and sculpturing easier. Although anatomical studies of woodblocks have been ongoing for years, little work has been done on softening treatments using natural materials. Hence, the purpose of this paper is to investigate the change in the physical properties of wood treated with saturated brine and the effect of salt on metal nails found embedded in woodblocks. After boiling for twelve h each in water and saturated brine, the saltwater-boiled specimens have longer drying times than the water-boiled specimens. Further, it was observed that salt particles penetrated the cells in the wood. As a result of exposing the copper and iron nails, which were stuck in each specimen, to a high humidity environment, the weight of the saltwater-boiled specimens increased due to the hygroscopicity of the salt. Corrosion of the nails also occurred. This result is similar to the problem that appears on the edge of a woodblock. In conclusion, it was shown that salt in the wood cells affects the corrosion of metal embedded in the wood.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.774-779
• /
• 2018

This paper presents fragile watermark system using quantization and DC coefficients. It is a way to prevent the watermark fro, being detected if the original has been modified in any way. In other words, the detection of a watermark ca be said to be originality after the watermark is inserted, without any damage. Since lossy compression such as JPEG is often allowed or required in practical applications, authentication methods, authentication methods should be distinguished from malicious modifications such as image shifting, cropping, filtering, and replacement. The proposed algorithm implements a fragile watermarking algorithm that shows image authentication with JPEC compression and the watermark easily breaks other malicious variants.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.71-83
• /
• 2008

In this paper, the basic principle, the application and the limitation of Infrared thermography technique to detect defects in different kinds of concrete structures are reviewed. Considered are voids beneath the concrete surface with experiments, delamination between concrete surface and fiber reinforced polymer sheet, the deterioration of steel bars in reinforced concrete, surface defects in historical buildings, pavements, bridges, and railway track graves. As a result, we conclude that infrared thermography methods are useful for fast detecting defects; however, they are influenced by environmental factors, specially temperature. Therefore it is recommended to use the infrared thermography technique with other NDT equipments to expect better result.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.105-110
• /
• 2008

The antioxidant properties of bamboos sap isolated from Phyllostachys pubescens were investigated. This product scavenged intracellular reactive oxygen species (ROS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical, and prevented lipid peroxidation. The radical scavenging activity of bamboo sap protected the viability of peritoneal macrophage cells exposed to hydrogen peroxide $(H_2O_2)$, Furthermore, bamboo sap reduced apoptotic cell formation induced by $H_2O_2$ as demonstrated by decreases in the number of hypo-diploid cells am apoptotic cell body formation. These results indicate that bamboo sap has radical scavenging activity and ameliorates $H_2O_2$ induced cytotoxicity.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.153-159
• /
• 2021

The purpose of this study is to determine the demage of tooth surface changes according to exposure time of commercially available green grape juice and pomegranate juice. Extracted healthy human premolar enamel surfaces were used. Control group immersed in phosphate-buffered saline (PBS) and 10 ml of commercially available green grape juice and pomegranate juice applied experimental group was divided into 7 groups. The pH of the experimental juice was measured, and the change and micrographics of the surface were confirmed through a Scanning Electron Microscope (SEM). It was found that the more the immersion time between the tooth surface and acid juice, such as damage to the tooth surface, has a greater effect on the surface damage. Based on the results of this study, it is necessary to reduce the number of drinking times and retention time in the oral cavity.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.2 no.2
• /
• pp.163-167
• /
• 2003

Purpose: The purpose of this study is to describe causes and injury mechanisms during inline skating and to find preventive measures .Materials and Methods: We have carefully selected 57 patients who have been treated in our hospital and nearby hospital. There are 37 males and 20 females, and mean age is 9 years 9 months (range,6-40 years old) . We have meticulously investigated their injured sites, their favorite location for inline skating , their use of protective means while they were on the wheels and their injury mechanisms . Results: Injury consisted of 50 fractures,1 meniscal tear,2 medial collateral ligament rupture and 4 contusion or sprain. Fracture sites varied as follows : 33(66$\%$) cases in distal radius and ulna,5(10$\%$) in elbow. 3(6$\%$) in diaphysis of humerus, etc Location at the time of injury varied as follows : 22 cases(39$\%$) in their apartment complex, 19 cases in (33$\%$) narrow streets, and 16 cases(28$\%$) in parks Only five patients admitted that any means of protection were used.2 cases only had knee pad on , 1 case put on elbow pad in addition, and 2 cases put on wrist guard as well. However none of the patients had helmet on Conclusion: We would strongly like to stress the importance of using sufficient protections and of choosing area where it is safe to ride, in order to reduce the risk of accidents. In addition, continuous and effective prior education from inline skate circles may be in order before riding the inline skate.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.201-201
• /
• 2009

반도체 레이저 다이오드(laser diode)는 도파로 내부의 굴절률 변화로 발생하는 필라멘테이션(filamentation) 문제와 벽개면 손상으로 인한 catastrophic optical damage(COD) 문제로 고품위/고출력 발진이 제한된다. 양자점 (quantum dot) 레이저 다이오드는 델타 함수 형태의 상태 밀도를 갖기 때문에 이론적으로는 zero 값의 선폭증가요소 특성을 가져 고출력 동작 시 필라멘테이션 문제를 제거할 수 있다. 또한 고출력 동작을 위한 COD 문제는 낮은 광 밀도를 갖는 활성층/도파로 영역의 에피구조 최적화를 통해 해결할 수 있다. 본 논문에서는 고출력 808 nm 양자점 반도체 레이저 다이오드 개발을 위한 에피구조 설계 및 최적화 연구를 수행하였다.