• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.636-644
• /
• 2004

Recently, self-etching adhesive system have been developed and bonding procedures simplified into one or two steps, which are simultaneously applied to both enamel and dentin. These systems are easy to use and have the potential for good clinical success. The purpose of this study is to evaluate in vitro the microleakage on the cementum/dentin and enamel walls in composite resin restoration of Class V cavities, regarding the use of different adhesive systems. 30 human premolars were divided into 3 groups. A standardized Class V preparation was prepared on the buccal and lingual surface of each premolar. The preparation were made parallel to the cementoenamel junctions, with the gingival half of the preparation extending 1mm apical to the cementoenamel junction. After adhesive system was applied to teeth as manufacture's recommendation, hybrid resin composite was filled in bulk into the preparation and light polymerized according to manufacturer's recommendations. Specimen were stored in distilled water at $37^{\circ}C$ for 5 days and thermocycled 1000 times ($5^{\circ}C{\pm}2^{\circ}C\;and\;55^{\circ}C{\pm}2^{\circ}C)$, then immersed in a 2% methylene blue solution for 12 hours. After sectioning mesio distally through the restorations, the degree of dye penetration was scored under a stereomicroscope at ${\times}\;25$ magnification. The data were analyzed statistically using t-test and one-way ANOVA. The results were as follows: ${\cdot}$ There is no adhesive system which can prevent microleakage perfectly. ${\cdot}$ There is significant difference in microleakage between enamel margin and dentin margin (p<0.0001). ${\cdot}$ In enamel margin, self-etching primer systems did not show any significant difference comparing total-etching system. In denin margin, self-etching primer systems did not show any significant difference comparing one-bottle adhesive system used in combination with total-etching.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.24-34
• /
• 2010

The aim of this study was to evaluate the effect of incorporated nano HA on the demineralization resistance and bonding strength of LC GIC in comparison with micro HA. Fuji II LC GIC was used as the control group and a base material for experimental groups. Two experimental groups were prepared. One was prepared by adding 15% micro HA to LC GIC by weight ratio (Exp. 1), and the other was prepared by adding 15% nano HA instead (Exp. 2). According to the results, the following conclusions could be obtained. 1. Observing under the CLSM, the control group showed thicker enamel demineralization layer than in the experimental groups, and the Exp. 2 group showed the thinnest demineralization layer. 2. In SEM analysis, there was greater enamel demineralization in the control group. The Exp. 2 group was more resistant to demineralization compared to the Exp. 1 group. 3. The bonding strength was found to be in the increasing order of control, Exp. 1, and Exp. 2 group (p < 0.05). 4. Observing the fractured surfaces under SEM after the bonding strength test was performed, there were bone-like apatite particles formed in HA-added experimental groups, and a greater number of bone-like apatite particles were formed in the Exp. 2 group compared to the Exp. 1 group.

• Journal of The Korean Association For Science Education
• /
• v.37 no.4
• /
• pp.763-773
• /
• 2017

The purpose of this study is to investigate the impact of Argument-Based Inquiry (ABI) strategy on student's character competency. For this study, 51 grade 11 students (two classes) were selected to the role assignment (ABI-R group) and 46 students (two classes) were assigned to the non-role assignment group (ABI group). In the result, the role assignment group (ABI-R group) showed a statistically higher change in character competency than the group without role assignment (ABI group). Particularly, the ABI-R group has significantly higher grade than ABI group in empathy, responsibility, and respect among the sub-factors of character competency. However, in the case of the cooperation factor of character competency, the ABI group showed statistically significant higher grade than ABI-R group. The results of this study showed that Argument-Based Inquiry (ABI) as teaching and learning strategies in science can contribute to the enhancement of human character competency. In addition, we suggest that students should be actively involved in the class through role assignment, but it is necessary to present the class situation so that they can be actively engaged according to the problem situation rather than being fixed in a given role.

• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.192-199
• /
• 2003

This study was carried out to investigate the artificial cultivation of Pleurotus eryngii on the optimal medium vessel, periods of cultivation and the optimal method of pinheading for both yield and quality of fruiting body were also performed. The optimal composition of sawdust medium in polypropylene(PP) bottle was combination of sawdust(70%) and corncob(30%) but increased amount of corncob delayed the period of mycelial growth. The mycelial growth and the yield of fruiting body in the medium with beat pulp were worse than that without beat pulp. The optimal composition of nutrients for both yield and quality of fruit body tuned out to be a combination of rice bran(12%), wheat bran(12%) and cottonseed cake(6%). Additions of zeolite, shell lime and bean curd dregs were not effective in mycelial growth and yield of fruit body. When testing size of PP bottle for cultivation, the larger of bottle mouth is, the more pinheading number found, but the number of available fruit body is not significantly different. The culture in $1100\;ml-{\phi}75\;mm$ bottle is the best in the yield and quality of fruit body than those in $555\;ml-{\phi}50\;mm,\;850\;ml-{\phi}58\;mm,\;850\;ml-{\phi}65\;mm\;and\;1100\;ml-{\phi}65\;mm$ bottle. Using the PP bag for cultivation, a square shaped bag was better than a round shaped and black square shaped in mycelial growth and yield of fruit body. The most suitable period of incubation was 35 days after inoculation at $22{\pm}2^{\circ}C$. When the incubation periods was decreased less than 35 days, the pileus formation and yields were very bad but a pinheading condition looked similar, For an optimal pinheading, turning upside down was better than standing and covering.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.269-274
• /
• 1995

The basic composition of Mn-Zn ferrite was $Mn_{0.631}Zn_{0.316}Fe_{2.053}O_{4}$(specimen A), $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) and $Mn_{0.538}Zn_{0.308}Fe_{2.154}O_{4}$(specimen C) with additional 0.1 mol % $CaCo_{3}$ and 0.04 mol % $V_{2}O_{5}$. For high per¬meability and acceleration of grain growth, $CaCo_{3}$ and $V_{2}O_{5}$. was added. The mixture of the law materials was calcinated at $950^{\circ}C$ for 3 hours and then milled. The compacts of toroidal type were sintered at different temperature($1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for 2 hours in $N_2$ atmosphere. The effects of the various raw material composition and sintered temperature on the physical properties of Mn-Zn ferrite have been investigated. They turned out to be spinel structure by X-ray diffraction and the size of grain from SEM was from $18\;\mu\textrm{m}\;to\;23\;\mu\textrm{m}$. As the sintering temperature was increased from $1250^{\circ}C$ to $1350^{\circ}C$, the initial permeability and magnetic induction has increased and the both of Q factor and coercive force has decreased. The coercive force and curie temperature were almost the same at each specimen Their values were about 0.45 Oe and $200^{\circ}C$. The frequency of specimen will used in the range from 200 kHz to 2 MHz. The basic composition of $Mn_{0.584}Zn_{0.312}Fe_{2.104}O_{4}$(specimen B) sintered at $1300^{\circ}C$ shows the best results at magnetic induction (Br & Bm).

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.887-898
• /
• 2007

A physically based semi-distributed model, SWAT was applied to the Chungju Dam upstream watershed in order to investigate the spatial and temporal characteristics of watershed sediment yields. For this, general features of the SWAT and sediment simulation algorithm within the model were described briefly, and watershed sediment modeling system was constructed after calibration and validation of parameters related to the runoff and sediment. With this modeling system, temporal and spatial variation of soil loss and sediment yields according to watershed scales, land uses, and reaches was analyzed. Sediment yield rates with drainage areas resulted in $0.5{\sim}0.6ton/ha/yr$ excluding some upstream sub-watersheds and showed around 0.51 ton/ha/yr above the areas of $1,000km^2$. Annual average soil loss according to land use represented the higher values in upland areas, but relatively lower in paddy and forest areas which were similar to the previous results from other researchers. Among the upstream reaches, Pyeongchanggang and Jucheongang showed higher sediment yields which was thought to be caused by larger area and higher fraction of upland than other upstream sub-areas. Monthly sediment yields at the main outlet showed same trend with seasonal rainfall distribution, that is, approximately 62% of annual yield was generated during July to August and the amount was about 208 ton/yr. From the results, we could obtain the uniform value of sediment yield rate and could roughly evaluate the effect of soil loss with land uses, and also could analyze the temporal and spatial characteristics of sediment yields from each reach and monthly variation for the Chungju Dam upstream watershed.

• Korean Journal of Food Science and Technology
• /
• v.14 no.4
• /
• pp.301-308
• /
• 1982

Chungkook-jang Koji was fermented with rice straw at $40^{\circ}C\;and\;50^{\circ}C$ for 72 hours. The changes of proximate composition, pH, titrable acidity, nitrogen compounds, protease activity and free-amino acids during the fermentation were investigated. Moisture, lipid and protein contents remained essentially unchanged during the fermentation. The pH was gradually increased from 6.4 to 7.46 and 7.82 at $40^{\circ}C\;and\;50^{\circ}C$, respectively, after 72 hour fermentation. Amino type and water soluble nitrogen increased as fermentation progressed. however, the former slightly decreased after 60 hour fermentation. Chungkook-jang fermented at $40^{\circ}C$ showed somewhat higher protease activity than $50^{\circ}C$. However, protease activity at both fermentation temperatures showed the same trend; that is, it increased until 48 hour fermentation and thereafter decrease. Free amino acid content of Chung-kook-jang after 72 hour fermentation at $40^{\circ}C$ was 6 times greater than that of the steamed soybean, while it was 2.5 times greater at $50^{\circ}C$. Based on these results. it seems that the optimum fermentation conditions for Chungkook-jang were $40^{\circ}C$ and 72 hours.

• Journal of Life Science
• /
• v.16 no.4
• /
• pp.632-639
• /
• 2006

Here we examined the expression patterns and regulation of seven photosynthesis (PS) genes (puf, puc, puhA, bchC, bchE, bchF, and bchI) in the anoxygenic photosynthetic bacterium, Rhodobacter sphaeroides, based on lacZ reporter gene assay. Expression of the tested PS genes, except puhA and bchI, were strongly induced in R. sphaeroides grown under anaerobic conditions relative to that under aerobic conditions. The puhA and bchI genes appear to form the operons together with bchFNBHLM-RSP0290 and crtA, respectively. Expression of the puf, puc, and bchCXYZ operons in R. sphaeroides grown photosynthetically was proportional to the incident light intensity, whereas that of bchFNBHLM(RSP0290-puhA) was inversely related to light intensity. Expression of bchEJG was lowest under medium-light photosynthetic conditions $(10\;W/m^2)$ and highest under high light conditions $(100\;W/m^2)$. The regulation of PS genes by the three major regulatory systems involved in oxygen- and light-sensing in R. sphaeroides is as following: puf and bchC are regulated by both the PpsR repressor and the PrrBA two-component system. The puc operon is under control of PpsR, FnrL, and PrrBA system. Expression of bchE is controlled by FnrL and PrrBA two-component system, whereas bchF is regulated exclusively by PpsR. It was demonstrated that the PpsR repressor is responsible for high-light repression of bchF and that FnrL might be involved in perceiving the cellular redox state in addition to sensing $O_2$ itself.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.839-844
• /
• 2009

This experiment was conducted to evaluate pollen viability of Nakdongbyeo, transgenic rice lines, an F$_1$ hybrid from a cross between Milyang weedy rice and ABC-promoter transgenic rice line containing basta-resistant (bar) gene and subsequent selfed progenies, F$_2$ and F$_3$. The reaction of pollen with 3-{4,5 dimethylthiazolyl-2}-2,5-diphenyl monotetrazolium bromide (MTT) as a staining chemical immediately after pollen shedding showed maximum pollen viability of 86% in Nakdongbeyo, 75% in ABC-promoter transgenic rice line, 62% in ubiquitin-promoter transgenic line, 68% in F$_1$, 79% in F$_2$ and 78% in F$_3$. Viability gradually declined during subsequent observations at 20-minute intervals. However, there was a drastic decline in pollen viability after 40 minutes of pollen shedding. The mean difference of pollen viability among rice lines and time was highly significant, indicating significantly different pollen viabilities at different time intervals. Maximum viability of 36.2% was observed in F$_3$ and minimum viability of 3.5% was found in F$_2$ at 90 min after pollen shedding. Results of this experiment on pollen viability and longevity elucidate potential risks of pollen-mediated flow of herbicide-resistant gene from transgenic rice lines and possible integration of it into the weedy rice population.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.39-50
• /
• 2014

This paper reviews the results of recent observations in the Yeonsuri valley of Mt. Youngmun during springtime (March to May) in 2012. Automated weather stations were installed at twelve sites in the valley to measure temperature and 2, 3 dimensional wind. We examined temporal and spatial characteristics of temperatures and wind data. The Yeonsuri valley springtime average temperature lapse rate between the top and bottom of the entire period is $-0.44^{\circ}C/100$ m. It can be changed by the synoptic weather conditions, the lapse rates is greatest in order of clear days ($-0.48^{\circ}C/100$ m), rainy ($-0.41^{\circ}C/100$ m) and cloudy days ($-0.40^{\circ}C/100$ m). In the night, the temperature inversion layer (thermal belt) and the cold pool are formed within the valley. In addition, we measured temperature and wind distribution from the bottom to 3.5 m, the cold layers existed up to 1.5 m, which were affected by ground mixed layer. The results will provide useful guidance on agricultural practices as well as model simulations.